Variation in existing domestic service level of pipe-borne water supply and associated challenges in a tourism destination of Uyo Capital City,Nigeria

GeoJournal - Domestic water supply plays a very significant role in the day to day life of humans in the global society and without water, life cannot be continued and that while water provisions...     

A solution for the transition zone isosats in two-phase primary drainage in the presence of gravity

Primary drainage in a water-wet saturated medium in the absence of capillarity is typically a combination of shock (discontinuous) and rarefaction (continuous) waves. Using nonlinear relative permeability functions for the host fluid and the invading fluid leads to the existence of a shock wave front, and the degree of nonlinearity of the relative permeability functions has an inverse relationship with the size of the shock wave (i.e., difference of saturation between upstream and downstream of the shock wave), whereas for linear relative permeability functions, the shock wave size approaches 0. Injection of a lower-viscosity immiscible phase such as gas or solvent into a water-wet porous medium in the presence of large capillary pressure leads to development of an extended and growing saturation transition zone that follows the discontinuous shock wave front. In this article, a semianalytical solution for the position of equisaturation contours (isosats) in the transition zone in the presence of gravity is obtained for a set of linearized relative permeability functions. The capillary (diffusive) and buoyancy terms are neglected, and the generalized convective equation for mass conservation is obtained. The set of equations is then reduced to a one-dimensional steady-state differential equation through forcing the isosat formulation to obey mass conservation. This scheme allows the isosat distribution to be solved, and the case of injection into an axisymmetric geometry for a confined planar configuration is solved and presented. A finite element model was developed to demonstrate the reasonable agreement between analytical and numerical solutions.     

From subduction to transform motion: a seabeam survey of the Hellenic trench system

Preliminary results of a multi-narrow beam survey of the Hellenic trench system, in the Eastern Mediterranean, are presented. The southwestern Ionian branch is divided in small basins, partly filled with Pleistocene sediments. The morphology suggests that the basins are deformed by a compressional stress acting roughly perpendicularly to the trench along N50°E. This direction is the direction of the regional slip vector of the shallow thrust-type earthquakes. The structure of the southeastern Pliny-Strabo branch is quite different. Narrow en-e´chelon slots, oriented N40°E, have been mapped within the main troughs oriented N60°E. The regional earthquake slip vector is also oriented along N40°E. We conclude that the Hellenic trench system is an active subduction system, dominated by thrust along the Ionian branch and by transform motion along the Pliny-Strabo branch.     

Long-distance correlation between tectonic-controlled, isolated carbonate platforms by cyclostratigraphy and sequence stratigraphy in the Devonian of South China

During the early Middle Devonian in South China, an extensive carbonate platform was broken up through extension to create a complex pattern of platforms, and interplatform basins. In Givetian and Frasnian carbonate successions, five depositional facies, including peritidal, restricted shallow subtidal, semi‐restricted subtidal, intermediate subtidal and deep subtidal facies, and 18 lithofacies units are recognized from measured sections on three isolated platforms. These deposits are arranged into metre‐scale, upward‐shallowing peritidal and subtidal cycles. Nine third‐order sequences are identified from changes in cycle stacking patterns, vertical facies changes and the stratigraphic distribution of subaerial exposure indicators. These sequences mostly consist of a lower transgressive part and an upper regressive part. Transgressive packages are dominated by thicker‐than‐average subtidal cycles, and regressive packages by thinner‐than‐average peritidal cycles. Sequence boundaries are transitional zones composed of stacked, high‐frequency, thinner‐than‐average cycles with upward‐increasing intensity of subaerial exposure, rather than individual, laterally traceable surfaces. These sequences can be further grouped into catch‐up and keep‐up sequence sets from the long‐term (second‐order) changes in accommodation and vertical facies changes. Catch‐up sequences are characterized by relatively thick cycle packages with a high percentage of intermediate to shallow subtidal facies, and even deep subtidal facies locally within some individual sequences, recording long‐term accommodation gain. Keep‐up sequences are characterized by relatively thin cycle packages with a high percentage of peritidal facies within sequences, recording long‐term accommodation loss. Correlation of long‐term accommodation changes expressed by Fischer plots reveals that during the late Givetian to early Frasnian increased accommodation loss on platforms coincided with increased accommodation gain in interplatform basins. This suggests that movement on faults resulted in the relative uplift of platforms and subsidence of interplatform basins. In the early Frasnian, extensive siliceous deposits in most interplatform basins and megabreccias at basin margins correspond to exposure disconformities on platforms.     

Prediction by regression and intrarange data scatter in surface-process studies

Modeling is a major component of contemporary earth science, and regression analysis occupies a central position in the parameterization, calibration, and validation of geomorphic and hydrologic models. Although this methodology can be used in many ways, we are primarily concerned with the prediction of values for one variable from another variable. Examination of the literature reveals considerable inconsistency in the presentation of the results of regression analysis and the occurrence of patterns in the scatter of data points about the regression line. Both circumstances confound utilization and evaluation of the models. Statisticians are well aware of various problems associated with the use of regression analysis and offer improved practices; often, however, their guidelines are not followed. After a review of the aforementioned circumstances and until standard criteria for model evaluation become established, we recommend, as a minimum, inclusion of scatter diagrams, the standard error of the estimate, and sample size in reporting the results of regression analyses for most surface-process studies.     

Diversity and origin of abyssal tholeiite from the Mid-Atlantic Ridge near 24° and 30° North latitude

On cursory examination of hand specimens and thin sections, the abyssal tholeiite in a dredge haul may appear to be uniform in composition. Chemical analyses of a considerable number of fragments, however, have always revealed the existence of regular compositional variation in them. The MgO content decreases with increasing SiO₂. In abyssal tholeiites with relatively low Al₂O₃ contents, the SiO₂, total iron, Na₂O and P₂O₅ contents tend to increase and the MgO content tends to decrease with increasing iron/magnesia ratio, probably owing to crystallization differentiation.In a certain dredge haul, high-alumina abyssal tholeiites (with Al₂O₃ contents near or over 17%) occur in association with low-alumina abyssal tholeiites. The magma of high-alumina abyssal tholeiites would be generated from that of low-alumina abyssal tholeiites by differentiation at a depth around 30 km.In pillow lavas of abyssal tholeiite free from weathering and metamorphism, the chilled rim of the pillow usually has virtually the same chemical composition as the more crystalline core except for a decrease of K₂O content toward the rim. On the other hand, the weathered rim of pillow lavas shows marked compositional change. The Fe₂O₃/FeO ratio of unweathered abyssal tholeiite is in the range of 0.1 to 0.3. This ratio and the H₂O^– and H₂O⁺ contents increase with advancing weathering.Lamont-Doherty Geological Observatory Contribution No. 1339     

Stress sensitivity of stylolite morphology

Stylolites are rough surfaces that form by localized stress-induced dissolution. Using a set of limestone rock samples collected at different depths from a vertical section in Cirque de Navacelles (France), we study the influence of the lithostatic stress on the stylolites morphology on the basis of a recent morphogenesis model. We measured the roughness of a series of bedding-parallel stylolites and show that their morphology exhibits a scaling invariance with two self-affine scaling regimes separated by a crossover-length (L) at the millimeter scale consistent with previous studies. The importance of the present contribution is to estimate the stylolite formation stress σ from the sample position in the stratigraphic series and compare it to the crossover-length L using the expected relationship: L ～ σ ^?2. We obtained a successful prediction of the crossover behavior and reasonable absolute stress magnitude estimates using relevant parameters: depth of stylolite formation between 300 to 600 m with corresponding normal stress in the range of 10–18 MPa. Accordingly, the stylolite morphology contains a signature of the stress field during formation and we thus suggest that stylolites could be used as paleo-stress gauges of deformation processes in the upper crust.     

Effect of alpha-damage annealing on apatite (U–Th)/He thermochronology

Recent data on He diffusion challenge the temperature sensitivity of apatite (U–Th)/He thermochronology: the damage induced by recoil of U and Th decay series during emission of α particles (α-recoil damage) has been proposed to modify He-diffusion properties through time. However, we propose that annealing of these irradiation defects may be an important phenomenon and may be significant in case of slowly-cooled or reheated basement rocks. To test this hypothesis, we developed a quantitative model including an explicit treatment of α-recoil damage, annealing, and their effect on He-diffusion kinetics, and calibrate it against literature data. Our model is based on two hypotheses: (1) helium is in equilibrium between an apatite crystal and its defects and (2) alpha-recoil damage annealing can be described analogously to fission-track annealing. This model has been embedded into a Monte Carlo simulation of helium production/ejection/diffusion and applied to data from the French Massif Central; a complex slowly-cooled terrain with burial reheating, where the thermal history has been constrained by previous fission-track (FT) data including FT length distributions. (U–Th)/He ages are close to the FT ages from the same samples and are generally reproducible among replicates, but some samples present He-age dispersion that is not correlated with crystal size. Our model reproduces the Massif Central data very well except for three samples where He ages are older than corresponding FT ages. We show that annealing of irradiation damage has an important impact on retentivity of helium and that the He content, [He] is only a rough approximation of the damage level. In particular our results show that independence of He ages on crystal sizes, in case of reheated samples, is a clear indication of the higher He retentivity induced by α-recoil defects and that an explicit treatment of defect annealing is required for a correct interpretation of (U–Th)/He ages in such a case. More generally a correlation with the crystal size can bring information on the thermal path only if the age of defects, well represented by the fission-track age, is available, due to the dependence of the partial retention zone on damages. Conversely, in case of rapid cooling or for samples having low U and Th contents, damage effects can be ignored without significant effects on He ages.