Hydrometeorological thresholds for landslide initiation and forest operation shutdowns on the north coast of British Columbia

Debris flows and debris avalanches are the most widespread and hazardous types of landslides on the British Columbia north coast. Triggered by heavy rain, they pose risks to forestry workers in sparsely developed regions. The scarcity of long-term quality rain gauges and the lack of weather radar information create significant challenge in predicting the timing of landslides, which could be used to warn and, when necessary, evacuate forestry personnel. Traditional methods to relate rainfall antecedents and rainfall intensity to known landslide dates have proven to be unsatisfactory in this study due to extreme spatial variability of rainfall, enhanced by the orographic effect and the scarcity of rain gauges in a very large area. This has led to an integration of meteorological variables in a landslide advisory system that classifies three types of approaching storms by the 850-mbar wind speed and direction, the occurrence of subtropical moisture flow, and the existence of a warm layer characterized by high thickness values of the 500- to 1,000-mbar pressure levels. The storm classification was combined with a 4-week antecedent rainfall and the 24-h rainfall measured near or in the watershed where logging operations are taking place. This system, once implemented, is thought to reduce loss of life, injury, and economic losses associated with forestry works in the study area.     

Verwitterung und Bodenbildung auf diluvialen Schotterterrassen

Ohne Zusammenfassung     

Comparison of groundwater recharge estimation techniques in an alluvial aquifer system with an intermittent/ephemeral stream (Queensland,Australia)

This study demonstrates the importance of the conceptual hydrogeological model for the estimation of groundwater recharge rates in an alluvial system interconnected with an ephemeral or intermittent stream in south-east Queensland, Australia. The losing/gaining condition of these streams is typically subject to temporal and spatial variability, and knowledge of these hydrological processes is critical for the interpretation of recharge estimates. Recharge rate estimates of 76–182 mm/year were determined using the water budget method. The water budget method provides useful broad approximations of recharge and discharge fluxes. The chloride mass balance (CMB) method and the tritium method were used on 17 and 13 sites respectively, yielding recharge rates of 1–43 mm/year (CMB) and 4–553 mm/year (tritium method). However, the conceptual hydrogeological model confirms that the results from the CMB method at some sites are not applicable in this setting because of overland flow and channel leakage. The tritium method was appropriate here and could be applied to other alluvial systems, provided that channel leakage and diffuse infiltration of rainfall can be accurately estimated. The water-table fluctuation (WTF) method was also applied to data from 16 bores; recharge estimates ranged from 0 to 721 mm/year. The WTF method was not suitable where bank storage processes occurred.     

Methanogenesis in the sediment of the acidic Lake Caviahue in Argentina

The biogeochemistry of methane in the sediments of Lake Caviahue was examined by geochemical analysis, microbial activity assays and isotopic analysis. The pH in the water column was 2.6 and increased up to a pH of 6 in the deeper sediment pore waters. The carbon isotope composition of CH₄ was between − 65 and − 70‰ which is indicative for the biological origin of the methane. The enrichment factor ε increased from − 46‰ in the upper sediment column to more than − 80 in the deeper sediment section suggesting a transition from acetoclastic methanogenesis to CO₂ reduction with depth. In the most acidic surface layer of the sediment (pH < 4) methanogenesis is inhibited as suggested by a linear CH₄ concentration profile, activity assays and MPN analysis. The CH₄ activity assays and the CH₄ profile indicate that methanogenesis in the sediment of Lake Caviahue was active below 40 cm depth. At that depth the pH was above 4 and sulfate reduction was sulfate limited. Methane was diffusing with a flux of 0.9 mmol m^− 2 d^− 1 to the sediment surface where it was probably oxidized. Methanogenesis contributed little to the sediments carbon budget and had no significant impact on lake water quality. The high biomass content of the sediment, which was probably caused by the last eruption of Copahue Volcano, supported high rates of sulfate reduction which probably raised the pH and created favorable conditions for methanogens in deeper sediment layers.     

Evaluation of energy balance closure adjustment methods by independent evapotranspiration estimates from lysimeters and hydrological simulations

Non‐closure of the surface energy balance is a frequently observed phenomenon of hydrometeorological field measurements, when using the eddy‐covariance method, which can be ascribed to an underestimation of the turbulent fluxes. Several approaches have been proposed in order to adjust the measured fluxes for this apparent systematic error. However, there are uncertainties about partitioning of the energy balance residual between the sensible and latent heat flux and whether such a correction should be applied on 30‐min data or longer time scales. The data for this study originate from two grassland sites in southern Germany, where measurements from weighable lysimeters are available as reference. The adjusted evapotranspiration rates are also compared with joint energy and water balance simulations using a physically based distributed hydrological model. We evaluate two adjustment methods: the first one preserves the Bowen ratio and the correction factor is determined on a daily basis. The second one attributes a smaller portion of the residual energy to the latent heat flux than to the sensible heat flux for closing the energy balance for every 30‐min flux integration interval. Both methods lead to an improved agreement of the eddy‐covariance based fluxes with the independent lysimeter estimates and the physically based model simulations. The first method results in a better comparability of evapotranspiration rates, and the second method leads to a smaller overall bias. These results are similar between both sites despite considerable differences in terrain complexity and grassland management. Moreover, we found that a daily adjustment factor leads to less scatter than a complete partitioning of the residual for every half‐hour time interval. The vertical temperature gradient in the surface layer and friction velocity were identified as important predictors for a potential future parameterisation of the energy balance residual.     

Physical environmental controls on riparian root profiles associated with black poplar (Populus nigra L.) along the Tagliamento River,Italy

Tree roots contribute to the resistance of riparian sediments to physical deformation and disintegration. Understanding reinforcement by roots requires information on root distributions within riparian soils and sediments. Continuous‐depth models or curves have been proposed to describe vertical root density variations, providing useful indicators of the types of function that may be appropriate to riparian trees, but have generally been estimated for terrestrial species or broad vegetation types rather than riparian species or environments. We investigated vertical distributions of roots >0.1 mm diameter of a single riparian tree species (Populus nigra L.) along the middle reaches of a single river (Tagliamento River, Italy), where Populus nigra dominates the riparian woodland. Root density (hundreds m^?2) and root area ratio (RAR in cm² m^?2) were measured within 10 cm depth increments of 24 excavated bank profiles across nine sites. Sediment samples, extracted from distinct strata within the profiles, were analysed for moisture content, organic matter content and particle size. Statistical analyses identified two groups of wetter and drier profiles and five sediment types. Following log_e‐transformation of root density and RAR, linear regression analysis explored their variation with depth and, using dummy variables, any additional influence of moisture and sediment type. Significant linear regression relationships were estimated between both root density and RAR and depth which explained only 15% and 8% of the variance in the data. Incorporating moisture and then sediment characteristics into the analysis increased the variance explained in root density to 29% and 36% and in RAR to 14% and 26%. We conclude that riparian tree root density and RAR are highly spatially variable and are poorly explained by depth alone. Complex riparian sedimentary structures and moisture conditions are important influences on root distributions and so need to be incorporated into assessments of the contribution of roots to river bank reinforcement. Copyright © 2016 John Wiley & Sons, Ltd.