Petrogenesis of low-δ<Superscript>18</Superscript>O quartz porphyry dykes,Koegel Fontein complex,South Africa

This paper investigates the origin of low-δ¹⁸O quartz porphyry dykes associated with the 144–133 Ma Koegel Fontein Igneous Complex, which was intruded during the initial phase of breakup of Africa and South America. The 25-km diameter Rietpoort Granite is the largest and youngest phase of activity, and is roofed by a 10-km diameter pendant of gneiss. Quartz porphyry (QP) dykes, up to 15 m in width, strike NW–SE across the complex. The QP dykes that intruded outside the granite have similar quartz phenocryst δ¹⁸O values (average 8.0‰, ± 0.7, n?=?33) to the granite (average 8.3?±?1.0, n?=?7). The QP dykes that intruded the roof pendant have quartz phenocrysts with more variable δ¹⁸O values (average 1.6‰, ± 2.1, n?=?55). In some cases quartz phenocrysts have δ¹⁸O values as low as ? 2.5‰. The variation in δ¹⁸O value within the quartz crystal population of individual dykes is small relative to the overall range, and core and rim material from individual quartz phenocrysts in three samples are identical within error. There is no evidence that quartz phenocryst δ¹⁸O values have been affected by fluid–rock interaction. Based on a ?_quartz?magma value of 0.6‰, magma δ¹⁸O values must have been as low as ? 3.1‰. Samples collected along the length of the two main QP dykes that traverse the roof pendant have quartz phenocryst δ¹⁸O values that range from +?1.1 to +?4.6‰, and ? 2.3 to +?5.6‰, respectively. These δ¹⁸O values correlate negatively (r = ? 0.96) with initial ⁸⁷Sr/⁸⁶Sr, which can be explained by the event that lowered δ¹⁸O values of the source being older than the dykes. We suggest that the QP dykes were fed by magma produced by partial melting of gneiss, which had been variably altered at high temperature by ¹⁸O-depleted meteoric water during global glaciation at ~?550 Ma. The early melts had variable δ¹⁸O value but as melt pockets interconnected during melting, the δ¹⁸O values approached that of average gneiss. Variable quartz phenocryst δ¹⁸O values in the same dyke can be explained by vertical emplacement, at variable rates of ascent along the dyke. The lateral variation in quartz, and hence magma δ¹⁸O value at a particular point along a single dyke would depend on the rate of ascent of magma at that point along the dyke, and the ‘age’ of the particular magma batch.     

Crystal nucleation and growth produced by continuous decompression of Pinatubo magma

High-temperature decompression experiments demonstrate that crystal textures preserve a record of the style and rate of magmatic ascent. To reinforce this link, we performed a suite of isothermal decompression experiments using starting material from the climactic 1991 Pinatubo eruption. We decompressed experiments from 220 MPa to final, quench pressures of 75 or 30 MPa using continuous decompression rates of 100, 30, 10, 3, 1, and 0.3 MPa h^?1. Amphibole, clinopyroxene, and plagioclase crystallized during the experiments, with plagioclase microlites dominating the assemblage. Total microlite number densities range from 10^7.6±0.4 up to 10^8.2±0.2 cm^?3, with plagioclase accounting for up to 65% of the total number. Plagioclase microlite area increased systematically from 19?±?8 to 937?±?487 µm² with increasing experiment duration. Our textures provide time-integrated records of crystal kinetics. Average nucleation and areal growth rates of plagioclase are highest in the fastest decompressions (~?10^7.5 cm^?3 h^?1 and 10.1?±?4.1 µm² h^?1, respectively) and more than an order of magnitude lower in the slowest experiments (~?10^5.5 cm^?3 h^?1 and 0.8?±?0.2 µm² h^?1, respectively). Both nucleation and growth rates are highest at high degrees of disequilibrium. We find that peak supersaturation-dependent instantaneous rates are generally more than an order of magnitude faster than average rates. We use those instantaneous nucleation and growth rates to introduce an iterative model to evaluate the effects of different decompression rates, decompression paths (continuous, single-step or multistep), and the presence of phenocrysts on final crystallinity and microlite size distribution.     

Impact of soil and water conservation measures on catchment hydrological response—a case in north Ethiopia

Impact studies of catchment management in the developing world rarely include detailed hydrological components. Here, changes in the hydrological response of a 200‐ha catchment in north Ethiopia are investigated. The management included various soil and water conservation measures such as the construction of dry masonry stone bunds and check dams, the abandonment of post‐harvest grazing, and the establishment of woody vegetation. Measurements at the catchment outlet indicated a runoff depth of 5 mm or a runoff coefficient (RC) of 1·6% in the rainy season of 2006. Combined with runoff measurements at plot scale, this allowed calculating the runoff curve number (CN) for various land uses and land management techniques. The pre‐implementation runoff depth was then predicted using the CN values and a ponding adjustment factor, representing the abstraction of runoff induced by the 242 check dams in gullies. Using the 2006 rainfall depths, the runoff depth for the 2000 land management situation was predicted to be 26·5 mm (RC = 8%), in line with current RCs of nearby catchments. Monitoring of the ground water level indicated a rise after catchment management. The yearly rise in water table after the onset of the rains (ΔT) relative to the water surplus (WS) over the same period increased between 2002–2003 (ΔT/WS = 3·4) and 2006 (ΔT/WS >11·1). Emerging wells and irrigation are other indicators for improved water supply in the managed catchment. Cropped fields in the gullies indicate that farmers are less frightened for the destructive effects of flash floods. Due to increased soil water content, the crop growing period is prolonged. It can be concluded that this catchment management has resulted in a higher infiltration rate and a reduction of direct runoff volume by 81% which has had a positive influence on the catchment water balance. Copyright © 2010 John Wiley & Sons, Ltd.     

Passive microwave remote sensing of the historic February 2010 snowstorms in the Middle Atlantic region of the USA

The snowfall in the Baltimore/Washington metropolitan area during the winter of 2009/2010 was unprecedented and caused serious snow‐related disruptions. In February 2010, snowfall totals approached 2 m, and because maximum temperatures were consistently below normal, snow remained on the ground the entire month. One of the biggest contributing factors to the unusually severe winter weather in 2009/2010, throughout much of the middle latitudes, was the Arctic Oscillation. Unusually high pressure at high latitudes and low pressure at middle latitudes forced a persistent exchange of mass from north to south. In this investigation, a concerted effort was made to link remotely sensed falling snow observations to remotely sensed snow cover and snowpack observations in the Baltimore/Washington area. Specifically, the Advanced Microwave Scanning Radiometer onboard the Aqua satellite was used to assess snow water equivalent, and the Advanced Microwave Sounding Unit‐B and Microwave Humidity Sounder were employed to detect falling snow. Advanced Microwave Scanning Radiometer passive microwave signatures in this study are related to both snow on the ground and surface ice layers. In regard to falling snow, signatures indicative of snowfall can be observed in high frequency brightness temperatures of Advanced Microwave Sounding Unit‐B and Microwave Humidity Sounder. Indeed, retrievals show an increase in snow water equivalent after the detection of falling snow. Yet, this work also shows that falling snow intensity and/or the presence of liquid water clouds impacts the ability to reliably detect snow water equivalent. Moreover, changes in the condition of the snowpack, especially in the surface features, negatively affect retrieval performance. Copyright © 2011. This article is a U.S. Government work and is in the public domain in the USA.     

Geomorphological findings on the build-up of pleistocene glaciation in Southern Tibet and on the problem of inland ice —

Summary The last Ice Age (Würm) glacier cover was reconstructed on the basis of standard geomorphological indicators in S Tibet between the S slope and N slope of the Himalaya by way of the Tibetan Himalaya to the Transhimalaya (28° – 29° 50' N/85° 40' – 91° 10' E). At the same time, though subject to varying density of data, the process of Late and Post-Glacial deglaciation to Neo-Galacial and Recent glacier cover was considered. Evidence of an almost total glaciation of S Tibet was found in indicators like glaciated knobs, trough valleys with pronounced flank polishings and limits of glacial scouring on nunataks, as well as in findings of erratics, lateral moraines, end moraines, and terraces of outwash plains. This total glaciation took the form of an ice-stream network and attained a thickness of at least 1200 m. Ice-free to about 87° – 86° E, the Tsangpo valley with its sander deposits occupied the gap between the glacier areas of the Tibetan and High Himalayas in the S (I 3) and those of the Transhimalaya in the N (I 2). In the light of recently glaciated Late Glacial terminal moraines and ice marginal rapms it has been possible to estimate a glacio-isostatic uplift of c. 400 m during 10 x 10³ years (an average of 40 mm/year) following deglaciation. It is about 3 to 8 times greater than the tectonic uplift of the High Himalaya. The post-glacially intensified uplift of the S Tibetan Plateau by comparison with the High Himalaya is attributed to the much greater glacier burden during the Ice Age.In the area under investigation a High Glacial ELA depression (equilibrium line altitude depr.) of at least 1200 (1180) m was reconstructed for a mean altitude of about 4700 (4716) m asl. Assuming constant hygric conditions and a gradient of 0.7° C/100 m, the temperature drop at the time would have been 8.4° C. Since precipitation during the Ice Age must, if anything, have been less, a drop in summer temperature of about 10° C may be regarded as probable.     

Subsurface transport in water and gas

Current designs for nuclear-waste repositories rely primarily upon subsurface geologic barriers for long-term containment. Because water and air are generally considered to be the mechanisms most likely to transport radioactivity to the surface environment, flow and transport models are important tools in repository assessment. Most models assume that the geologic medium can be treated as a continuum. A substantial body of recent work has focused on applying these models to difficult-to-solve problems, such as the simulation of variably dense or variably saturated flow and transport, large and complex flow systems, sharp solute concentration fronts, and fractured rock systems. The complex chemical interactions between the transport fluid and solid particles within the system have been analyzed using geochemical flow models, most of which assume that the system is at chemical equilibrium. The role of colloids in contaminant transport is a relatively new area of research. The large-scale effects of small-scale variability within the geologic system have been the subject of intense investigation. Inherent limitations of the continuum approach have prompted the design of models in which the flow occurs in discrete fractures. The difficulty and complexity of simulating transport has led to the development of network transport models, which represent the flow field as a series of 1-D path segments. The widespread use of models for prediction and analysis has prompted investigations of their reliability and relative merits.     

Quantificational reductionism as a risk in geography and cartography

A reductionistic concept is being pursued in the 125 000 geomorphological mapping of the Federal Republic of Germany. Complex landscape elements with a base length greater than 100 m are broken down into partial elements and re-interpreted in terms of quantificational or abstractly defined, theoretically neutral map symbols. The genetic aspect is expressed by areal colouring. In this way it aims to achieve an interdisciplinary utilization of such information. This reduction has proved to be too drastic insofar as it gives rise to irretrievable loss of information. The claim that use-oriented, ecologically relevant information would be derivable from the GMM-25 has not been substantiated. As ecologically justifiable evaluation must also consider as its most fundamental indicators the quality and distribution of biotopes. These are not even rudimentarily included in the GMM-25. The uncontextualized blending of information units which only make sense in heterogeneous contexts to produce a single map is antithetical to the principle of subject related selection of relevant characteristics and prevents comprehension of the systematic relationships.The underlying concept of the GMM-25, derived from an uncritical incorporation of physico-mathematical total predictability principles, leads to an irreversible renunciation of the necessarily complex constituents of a high geomorphological level of integration.