Aerosol climatology for the planetary boundary layer derived from regular lidar measurements

Regular aerosol extinction and backscatter measurements using a UV Raman Lidar have been performed for almost 3 years in Hamburg in the frame of the German Lidar Network. A set of 92 aerosol extinction and 164 aerosol backscatter profiles has been used for statistical investigations. Mean values and variances of the aerosol extinction and backscatter in the boundary layer have been calculated. Large fluctuations during the whole year have been found. The measured aerosol extinction over Hamburg shows a seasonal cycle with highest values in early fall and a second less prominent peak in spring.An analysis of the data using back trajectories showed a dependence of the aerosol extinction on the origin of the air mass. The residence time of the air mass over industrialized areas was found to be an important parameter for the measured aerosol extinction at Hamburg. However, only a small part of the total variability could be explained by the air mass origin.For 75 cases of aerosol extinction measurements under cloud-free conditions, the aerosol backscatter profile and therefore, the lidar ratio as a function of altitude could be determined. Winter measurements of the lidar ratio are often close to model results for maritime aerosol, the summer measurements are close to the model results for urban or continental aerosols.The high quality of the data has been proven by intercomparisons with other lidar systems and with star photometer measurements of the aerosol optical depth during the Lindenberg Aerosol Characterization Experiment (LACE'98) field campaign.     

Late Cretaceous reactivation of major crustal shear zones in northern Namibia: constraints from apatite fission track analysis

Namibia's passive continental margin records a long history of tectonic activity since the Proterozoic. The orogenic belt produced during the collision of the Congo and Kalahari Cratons in the Early Proterozoic led to a zone of crustal weakness, which became the preferred location for tectonism during the Phanerozoic. The Pan-African Damara mobile belt forms this intraplate boundary in Namibia and its tectonostratigraphic zones are defined by ductile shear zones, where the most prominent is described as the Omaruru Lineament–Waterberg Thrust (OML–WT). The prominance of the continental margin escarpment is diminished in the area of the Central and Northern Zone of the Damara belt where the shear zones are located. This area has been targeted with a set of 66 outcrop samples over a 550-km-long, 60-km-broad coast-parallel transect from the top of the escarpment in the south across the Damara sector to the Kamanjab Inlier in the north. Apatite fission track age and length data from all samples reveal a regionally consistent cooling event. Thermal histories derived by forward modelling bracket this phase of accelerated cooling in the Late Cretaceous. Maximum palaeotemperatures immediately prior to the onset of cooling range from ca. 120 to ca. 60 °C with the maximum occurring directly south of the Omaruru Lineament. Because different palaeotemperatures indicate different burial depth at a given time, the amount of denudation can be estimated and used to constrain vertical displacements of the continental crust. We interpret this cooling pattern as the geomorphic response to reactivation of basement structures caused by a change in spreading geometry in the South Atlantic and South West Indian Oceans.     

Impact of suboxia on sinking particulate organic carbon: Enhanced carbon flux and preferential degradation of amino acids via denitrification

Fluxes of particulate organic carbon (POC) through the oxygen deficient waters in the eastern tropical North Pacific were found to be relatively less attenuated with depth than elsewhere in the eastern North Pacific. The attenuation coefficient (b) for the flux was found to be 0.40 versus the composite value of 0.86 determined by Martin et al. (1987). To examine this further, sinking POC was collected using sediment traps and allowed to degrade in oxic and suboxic experiments. Using a kinetic model, it was found that degradation proceeded at similar rates (roughly 0.8 day⁻¹) under oxic and suboxic conditions, but a greater fraction of bulk POC was resistant to degradation in the suboxic experiments (61% vs. 23%). Amino acids accounted for 37% of POC collected at 75m, but following degradation the value dropped to 17% and 16% in the oxic and suboxic experiments respectively. POC collected from 500m was 10% amino acids. The non-AA component of POC collected at 75m was not degraded under suboxic conditions, while under oxic conditions it was. These results suggest that microbes degrading OC under suboxic conditions via denitrification preferentially utilize nitrogen-rich amino acids. This preferential degradation of amino acids suggests that 9% more nitrogen may be lost via water column denitrification than is accounted for when a more “Redfieldian” stoichiometry for POC is assumed.     

3D shear-wave velocity structure of the Eifel plume, Germany

The Quaternary Eifel volcanic fields, situated on the Rhenish Massif in Germany, are the focus of a major interdisciplinary project. The aim is a detailed study of the crustal and mantle structure of the intraplate volcanic fields and their deep origin. Recent results from a teleseismic P-wave tomography study reveal a deep low-velocity structure which we infer to be a plume in the upper mantle underneath the volcanic area [J.R.R. Ritter et al., Earth Planet. Sci. Lett. 186 (2001) 7-14]. Here we present a travel-time investigation of 5038 teleseismic shear-wave arrivals in the same region. First, the transverse (T) and radial (R) component travel-time residuals are treated separately to identify possible effects of seismic anisotropy. A comparison of 2044 T- and 2994 R-component residuals demonstrates that anisotropy does not cause any first-order travel-time effects. The data sets reveal a deep-seated low-velocity anomaly beneath the volcanic region, causing a delay for teleseismic shear waves of about 3 s. Using 3773 combined R- and T-component residuals, an isotropic non-linear inversion is calculated. The tomographic images reveal a prominent S-wave velocity reduction in the upper mantle underneath the Eifel region. The anomaly extends down to at least 400 km depth. The velocity contrast to the surrounding mantle is depth-dependent (from −5% at 31-100 km depth to at least −1% at 400 km depth). At about 170-240 km depth the anomaly is nearly absent. The resolution of the data is sufficient to recover the described features, however the anomaly in the lower asthenosphere is underestimated due to smearing and damping. The main anomaly is similar to the P-wave model except the latter lacks the ‘hole’ near 200 km depth, and both are consistent with an upper mantle plume structure. For plausible anhydrous plume material in the uppermost 100 km of the mantle, an excess temperature as great as 200-300 K is estimated from the seismic anomaly. However, 1% partial melt reduces the required temperature anomaly to about 100 K. The temperature anomaly associated with the deeper part of the plume (250 to about 450 km depth) is at least 70 K. However, this estimate is quite uncertain, because the amplitude of the shear-wave anomaly may be larger than the modelled one. Another possibility is water in the upwelling material. The gap at 170-240 km depth could arise from an increase of the shear modulus caused by dehydration processes which would not affect P-wave velocities as much. An interaction of temperature and compositional variations, including melt and possibly water, makes it difficult to differentiate quantitatively between the causes of the deep-seated low-velocity anomaly.     

The BEAM-project: prediction and assessment of mixture toxicities in the aquatic environment

Freshwater and marine ecosystems are exposed to various multi-component mixtures of pollutants. Nevertheless, most ecotoxicological research and chemicals regulation focus on hazard and exposure assessment of individual substances only, the problem of chemical mixtures in the environment is ignored to a large extent. In contrast, the assessment of combination effects has a long tradition in pharmacology, where mixtures of chemicals are specifically designed to develop new products, e.g. human and veterinary drugs or agricultural and non-agricultural pesticides. In this area, two concepts are frequently used and are thought to describe fundamental relationships between single substance and mixture effects: Independent Action (Response Addition) and Concentration Addition. The question, to what extent these concepts may also be applied in an ecotoxicological and regulatory context may be considered a research topic of major importance, as the concepts would allow to make use of already existing single substance toxicity data for the predictive assessment of mixture toxicities. Two critical knowledge gaps are identified: (a) There is a lack of environmental realism, as a huge part of our current knowledge about the applicability of the concepts is restricted to artificial situations with respect to mixture composition or biological effect assessment. (b) The knowledge on what exactly is needed for using the concepts as tools for the predictive mixture toxicity assessment is insufficient. Both gaps seriously hamper the necessary, scientifically sound consideration of mixture toxicities in a regulatory context.In this paper, the two concepts will be briefly introduced, the necessity of considering the toxicities of chemical mixtures in the environment will be demonstrated and the applicability of Independent Action and Concentration Addition as tools for the prediction and assessment of mixture toxicities will be discussed. An overview of the specific aims and approaches of the BEAM project to fill in the identified knowledge gaps is given and first results are outlined.     

Microbial Degradation of Tar Oil Compounds under Different Redox Conditions

The microbial transformation of typical tar oil compounds such as acridine, benzo(b)thiophene, dibenzofuran, indane, and indene under different redox conditions was investigated in microcosm studies. Under aerobic conditions the inherent contamination in polluted soil as well as the added N‐, S‐, O‐ heterocyclic and homocyclic compounds were transformed predominantly apart from thiophene. 1‐Indanone was detected by RP‐HPLC‐DAD and GC‐MS as an intermediate metabolite from indane and indene. Under nitrate and sulfate reducing conditions indane, benzo(b)thiophene, and dibenzofuran were transformed in assays with the polluted soil samples from well B 65 and B 66 within 426 days, whereas they were persistent in assays with the highly polluted soil B 67. All heterocyclic and homocyclic compounds added to the non‐contaminated soil from well B 85 were not degraded under nitrate and sulfate reducing conditions, too. The results indicate that for the decision, wether natural attenuation can be implemented in the remediation of contaminated site, in addition to BTEX and PAHs especially the fate of further tar oil compounds in anoxic aquifers has to be considered.     

Pleistocene/Holocene climate change, re-establishment of fluvial drainage network and increase in relief in the Swiss Alps

ABSTRACT Data are presented about modern sediment discharge of the Swiss rivers and related to the size of catchments. The information reveals that the Central Alps have experienced denudation rates of ≈0.15 mm yr⁻¹ in the foreland, and ≈0.5 mm yr⁻¹ in the Alpine core. Mapping, however, indicates that modern erosion only affects 30–50% of the Alpine surface, and that fluvial and associated hillslope processes have focused erosion in 50–200-m-deep valleys. These valleys are incised into the glacial surface. If this limited spatial extent of erosion is considered, then effective erosion rates are significantly higher than average denudation rates. These effective rates equal or locally exceed modern rates of rock uplift. This implies that the modification of erosional processes related to the Pleistocene/Holocene climate change has resulted in an increase in the relief at a local scale. At a drainage basin scale, however, the relief appears not to change at present.     

Secondary ferrimagnetic minerals in Welsh soils: a comparison of mineral magnetic detection methods and implications for mineral formation

A study of mineral magnetic parameters was carried out on a Late Pleistocene and Holocene sedimentary sequence (of nearly 18 m) from Lake Bledowo (central Poland). Sediments of Lake Bledowo have already been analysed for bulk sediment mineralogy and biogenic materials. The mineral magnetic stratigraphy confirms the major changes in palaeo-environmental conditions that have been deduced from other methods. The most important mineral magnetic change results from the authigenetic formation of ferrimagnetic greigite, Fe₃S₄, during the beginning of lacustrine conditions (± 12 000 yr BP). Our data also indicate a detrital origin of overlying ferrimagnetic iron oxides. It is suggested that they originate from brown soils developed on the boulder clay constituting the west side of the lake shore. Variations of ferrimagnetic iron oxide size are related to the early diagenetic processes in the sediment. Larger particles are present in periods with early diagenesis of organic matter in anoxic conditions. This indicates the dissolution of fine magnetic particles by iron-oxide-reducing bacteria and results in homogeneous magnetic grain sizes, despite their origin from soils, characterized by a multimodal grain-size distribution.     

Correlation of seismic activity and fumarole temperature at the Mt. Merapi volcano (Indonesia) in 2000

In this paper we present densely sampled fumarole temperature data, recorded continuously at a high-temperature fumarole of Mt. Merapi volcano (Indonesia). These temperature time series are correlated with continuous records of rainfall and seismic waveform data collected at the Indonesian–German multi-parameter monitoring network. The correlation analysis of fumarole temperature and precipitation data shows a clear influence of tropical rain events on fumarole temperature. In addition, there is some evidence that rainfall may influence seismicity rates, indicating interaction of meteoric water with the volcanic system. Knowledge about such interactions is important, as lava dome instabilities caused by heavy-precipitation events may result in pyroclastic flows. Apart from the strong external influences on fumarole temperature and seismicity rate, which may conceal smaller signals caused by volcanic degassing processes, the analysis of fumarole temperature and seismic data indicates a statistically significant correlation between a certain type of seismic activity and an increase in fumarole temperature. This certain type of seismic activity consists of a seismic cluster of several high-frequency transients and an ultra-long-period signal (<0.002 Hz), which are best observed using a broadband seismometer deployed at a distance of 600 m from the active lava dome. The corresponding change in fumarole temperature starts a few minutes after the ultra-long-period signal and simultaneously with the high-frequency seismic cluster. The change in fumarole temperature, an increase of 5 °C on average, resembles a smoothed step. Fifty-four occurrences of simultaneous high-frequency seismic cluster, ultra-long period signal and increase of fumarole temperature have been identified in the data set from August 2000 to January 2001. The observed signals appear to correspond to degassing processes in the summit region of Mt. Merapi.