Progress in Carrier Phase Time Transfer

The progress of the joint Pilot Project for time transfer, formed by the International GPS Service (IGS) and the Bureal International des Poids et Mesures (BIPM), was recently reviewed. Three notable milestones were set. (1) The IGS will implement, at least in a test mode, an internally realized time scale based on an integration of combined frequency standards within the IGS network. This will eventually become the reference time scale for all IGS clock products (instead of the current GPS broadcast time). (2) A new procedure for combined receiver and satellite clock products will be implemented officially in November 2000. Receiver clocks are an entirely new product of the IGS. (3) The BIPM will coordinate an effort to calibrate all Ashtech Z12-T (and possibly other) receivers suitable for time transfer applications, either differentially or absolutely. Progress reports will be presented publicly in the spring 2001. ? 2001 John Wiley & Sons, Inc.     

A wave model for the Great Barrier Reef

A new wind wave generation model, WAMGBR, is presented that has been adapted from WAM especially for use in the complex geometry of the Great Barrier Reef. A technique (reef parameterization) has been presented that incorporates sub-grid scale dissipation caused by coral reefs. Three other improvements to WAM have been proposed. An explicit/implicit finite difference scheme has been implemented that allows for more efficient modelling (longer time steps) while maintaining diffusive characteristics that are at least as good as those of WAM. An offset in discrete angles creates more uniform diffusive characteristics. And, a transformed spherical coordinate system allows for more efficient grid sizes and smaller grid dependent refraction. Comparisons between modelling techniques and between model and measured data show that WAMGBR produces very good results in the difficult challenge of modelling both non-cyclonic and tropical cyclone waves in the geographically complex environment of the Great Barrier Reef.     

Ultra-Deep Optical Spectroscopy with PMAS. Using the Nod-and-Shuffle Technique

PMAS, the Potsdam Multi-Aperture Spectrophotometer, is a new integral field spectrograph in the optical, which is optimized for good transmission and high image quality from 350 nm to 1 μm. We present our plan to implement a CCD charge-shuffle mode to allow for beam switching with a very high degree of sky subtraction accuracy for faint object 3-D spectroscopy. This revised version was published online in July 2006 with corrections to the Cover Date.     

Geographic Patterns of Craft Breweries at the Intraurban Scale

This article examines the intraurban geography of craft breweries in ten cities across the United States. First, through an exhaustive literature review, we outline both supply- and demand-side factors that might cause craft breweries to cluster. Second, we empirically test whether these establishments tend to cluster within cities using spatial statistical techniques. Many communities are attempting to support the establishment of more craft breweries as a way to boost tourism and economic development. The findings from this article aid in this discussion by providing insights into how craft brewers locate and the factors that could influence their location decision behavior. Our findings suggest that craft brewers do in fact cluster. There are both supply and demand factors responsible. On the supply side, the collaborative environment within the industry and the artisan nature of the industry's products allows for benefits of clustering to outweigh the costs associated with this behavior. On the demand side, the emergence of “brewery districts” allows individual brewers to enjoy the reputation benefits associated with the district in terms of increased foot traffic from locals and visitors looking to sample a variety of beers.     

Combining European Earth Observation products with Dynamic Global Vegetation Models for estimating Essential Biodiversity Variables

ABSTRACT

Global, fast and accessible monitoring of biodiversity is one of the main pillars of the efforts undertaken in order to revert it loss. The Group on Earth Observations Biodiversity Observation Network (GEO-BON) provided an expert-based definition of the biological properties that should be monitored, the Essential Biodiversity Variables (EBVs). Initiatives to provide indicators for EBVs rely on global, freely available remote sensing (RS) products in combination with empirical models and field data, and are invaluable for decision making. In this study, we provide alternatives for the expansion and improvement of the EBV indicators, by suggesting current and future data from the European Space Agencýs COPERNICUS and explore the potential of RS-integrated Dynamic Global Vegetation Models (DGVMs) for the estimation of EBVs. Our review found that mainly due to the inclusion of the Sentinel constellation, Copernicus products have similar or superior potential for EBV indicator estimation in relation to their NASA counterparts. DGVMs simulate the ecosystem level EBVs (ecosystem function and structure), and when integrated with remote sensing data have great potential to not only offer improved estimation of current states but to provide projection of ecosystem impacts. We suggest that focus on producing EBV relevant outputs should be a priority within the research community, to support biodiversity preservation efforts.     

Sampling Trace-Level Organic Solutes with Polymeric Tubing Part 2. Dynamic Studies

This is the second part of a study conducted to determine whether polymeric sampling tubing can affect organic analyte concentrations during a sampling event. In this part of the study, we looked for sorption and desorption of tricholoroethylene (TCE) and leaching of organic constituents in water pumped through five types of polymeric tubing. The materials tested were a rigid fluoropolymer, a flexible fluoropolymer, low-density polyethylene (LDPE), and two plasticized polypropylene tubings. The effects of tubing length and flow rate were examined.
The least sorptive tubings, both initially and at equilibrium, were the fluoropolymers. However, in some instances the LDPE tubing had little effect on TCE concentrations. This was when a slow flow rate was used to sample relatively shallow wells (50 feet [15 m] or less) or when a faster flow rate (1 L/min) was used to sample wells that are less than 500 feet (152 m). Further testing is recommended using more sorptive analytes.
Using high performance liquid chromatography (HPLC), we were unable to detect any constituents leaching from any of the tubings used in these studies, even when a slow flow rate was used. However, desorption of sorbed analytes is a concern for all the tubings tested, including the rigid fluoropolymer.     

Spatial heterogeneity of epibenthos on artificial reefs: fouling communities in the early stages of colonization on an East Australian shipwreck

Artificial reefs are spatially complex habitats and serve as good model systems to study patterns of community succession and the response of epibiota to environmental clines over small spatial scales. Here, we quantified spatial heterogeneity in community composition and diversity of fouling communities across a number of environmental gradients that included water depth, surface orientation of habitats, exposure to currents, and shelter. Assemblage structure was quantified by spatially replicated photo transects on a recently scuttled large navy ship off the East Australian coast, lying in 27 m of water. A rich assemblage of epifauna had colonized the wreck within a year, dominated by barnacles, sponges and bryozoans. Community structure varied significantly over small spatial scales of meters to tens of meters. Depth, surface orientation and exposure were the major environmental drivers. Assemblages were substantially less diverse and abundant on the deepest (23 m near the seafloor) part of the hull with residual antifouling paint, on sheltered surfaces inside the wreck, and on the sediment‐laden horizontal surfaces. Overall, the wrecks’ habitat complexity corresponds with small‐scale heterogeneity in the fouling communities. This study supports the notion that wrecks enhance local diversity and biomass within the habitat mosaic of their location, and habitat complexity may be an important mechanism for this, as demonstrated by the large spatial variability in the assemblages documented here.     

<Superscript>10</Superscript>Be, <Superscript>18</Superscript>O and radiogenic isotopic constraints on the origin of adakitic signatures: a case study from Solander and Little Solander Islands,New Zealand

Subduction-related Quaternary volcanic rocks from Solander and Little Solander Islands, south of mainland New Zealand, are porphyritic trachyandesites and andesites (58.20–62.19 wt% SiO₂) with phenocrysts of amphibole, plagioclase and biotite. The Solander and Little Solander rocks are incompatible element enriched (e.g. Sr ~931–2,270 ppm, Ba ~619–798 ppm, Th ~8.7–21.4 ppm and La ~24.3–97.2 ppm) with MORB-like Sr and Nd isotopic signatures. Isotopically similar quench-textured enclaves reflect mixing with intermediate (basaltic-andesite) magmas. The Solander rocks have geochemical affinities with adakites (e.g. high Sr/Y and low Y), whose origin is often attributed to partial melting of subducted oceanic crust. Solander sits on isotopically distinct continental crust, thus excluding partial melting of the lower crust in the genesis of the magmas. Furthermore, the incompatible element enrichments of the Solander rocks are inconsistent with partial melting of newly underplated mafic lower crust; reproduction of their major element compositions would require unrealistically high degrees of partial melting. A similar argument precludes partial melting of the subducting oceanic crust and the inability to match the observed trace element patterns in the presence of residual garnet or plagioclase. Alternatively, an enriched end member of depleted MORB mantle source is inferred from Sr, Nd and Pb isotopic compositions, trace element enrichments and εHf ? 0 CHUR in detrital zircons, sourced from the volcanics. ¹⁰Be and Sr, Nd and Pb isotopic systematics are inconsistent with significant sediment involvement in the source region. The trace element enrichments and MORB-like Sr and Nd isotopic characteristics of the Solander rocks require a strong fractionation mechanism to impart the high incompatible element concentrations and subduction-related (e.g. high LILE/HFSE) geochemical signatures of the Solander magmas. Trace element modelling shows that this can be achieved by very low degrees of melting of a peridotitic source enriched by the addition of a slab-derived melt. Subsequent open-system fractionation, involving a key role for mafic magma recharge, resulted in the evolved andesitic adakites.     

Fluid and source magma evolution of the Questa porphyry Mo deposit,New Mexico,USA

Combined fluid inclusion microthermometry and microanalysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) are used to constrain the hydrothermal processes forming a typical Climax-type porphyry Mo deposit. Molybdenum mineralisation at Questa occurred in two superimposed hydrothermal stages, a magmatic-hydrothermal breccia and later stockwork veining. In both stages, texturally earliest fluids were single-phase, of low salinity (~7 wt.% NaCl_equiv.) and intermediate-density. Upon decompression to ~300 bar, they boiled off a vapour phase, leaving behind a residual brine (up to 45 wt.% NaCl_equiv) at temperatures of ~420°C. The highest average Mo concentrations in this hot brine were ~500 μg/g, exceeding the Mo content of the intermediate-density input fluid by about an order of magnitude and reflecting pre-concentration of Mo by fluid phase separation prior to MoS₂ deposition from the brine. Molybdenum concentrations in brine inclusions, then, decrease down to 5 μg/g, recording Mo precipitation in response to cooling of the saline liquid to ~360°C. Molybdenite precipitation from a dense, residual and probably sulphide-depleted brine is proposed to explain the tabular shape of the ore body and the absence of Cu-Fe sulphides in contrast to the more common Cu-Mo deposits related to porphyry stocks. Cesium and Rb concentrations in the single-phase fluids of the breccia range from 2 to 8 and from 40 to 65 μg/g, respectively. In the stockwork veins, Cs and Rb concentrations are significantly higher (45–90 and 110–230 μg/g, respectively). Because Cs and Rb are incompatible and hydrothermally non-reactive elements, the systematic increase in their concentration requires two distinct pulses of fluid exsolution from a progressively more fractionated magma. By contrast, major element and ore metal concentrations of these two fluid pulses remain essentially constant. Mass balance calculations using fluid chemical data from LA-ICPMS suggest that at least 25 km³ of melt and 7 Gt of deep input fluid were necessary to provide the amount of Mo contained in the stockwork vein stage alone. While the absolute amounts of fluid and melt are uncertain, the well-constrained element ratios in the fluids together with empirical fluid/melt partition coefficients derived from the inclusion analyses suggest a high water content of the source melt of ~10%. In line with other circumstantial evidence, these results suggest that initial fluid exsolution may have occurred at a confining pressure exceeding 5 kbar. The source of the molybdenum-mineralising fluids probably was a particularly large magma chamber that crystallised and fractionated in the lower crust or at mid-crustal level, well below the shallow intrusions immediately underlying Questa and other porphyry molybdenum deposits. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.