Occurrence and distribution of shortnose sturgeon,Acipenser brevirostrum,in the upper tidal Delaware River

Sampling in the upper tidal Delaware River between Trenton, New Jersey, and Philadelphia, Pennsylvania, from July 1981 through December 1984 demonstrated the existence of a significant population of shortnose sturgeon. The sturgeon aggregate in the river channel during daylight hours, especially in the area between Trenton and Florence, New Jersey (river km 211.8 to 198.8). Occurrence in the river downstream of Florence appears to be restricted by poor water quality during summer months. Sturgeon were present in the study area throughout the year, but largest numbers were collected from May though November. No spawning was observed during this study, but presence of males with milt suggests that spawning possibly occurs in the Trenton area. Preliminary population estimates (Peterson, Schnabel and Seber-Jolly) indicate an adult population of approximately 6,000–14,000 shortnose sturgeon occupying the upper tidal Delaware River.     

Expected loss‐based alarm threshold set for earthquake early warning systems

Earthquake early warning systems (EEWS) seem to have potential as tools for real‐time seismic risk management and mitigation. In fact, although the evacuation of buildings requires warning time not available in many urbanized areas threatened by seismic hazard, they may still be used for the real‐time protection of critical facilities using automatic systems in order to reduce the losses subsequent to a catastrophic event. This is possible due to the real‐time seismology, which consists of methods and procedures for the rapid estimation of earthquake features, as magnitude and location, based on measurements made on the first seconds of the P‐waves. An earthquake engineering application of earthquake early warning (EEW) may be intended as a system able to issue the alarm, if some recorded parameter exceeds a given threshold, to activate risk mitigation actions before the quake strikes at a site of interest. Feasibility analysis and design of such EEWS require the assessment of the expected loss reduction due to the security action and set of the alarm threshold. In this paper a procedure to carry out these tasks in the performance‐based earthquake engineering probabilistic framework is proposed. A merely illustrative example refers to a simple structure assumed to be a classroom. Structural damage and non‐structural collapses are considered; the security action is to shelter occupants below the desks. The cost due to a false alarm is assumed to be related to the interruption of didactic activities. Results show how the comparison of the expected losses, for the alarm‐issuance and non‐issuance cases, allows setting the alarm threshold on a quantitative and consistent basis, and how it may be a tool for the design of engineering applications of EEW. Copyright © 2007 John Wiley & Sons, Ltd.     

Raman microspectroscopy: A non-destructive tool for routine calibration of apatite crystallographic structure for fission-track analyses

Compositional control on the annealing kinetics of fission-tracks (FT) in apatite requires routine measurement of sample grain composition. However, for practical reasons the bulk composition of analysed grains is not routinely measured and instead grain chlorine content or etch-pit dimensions are used to characterise a samples annealing behaviour. A more desirable approach is to measure crystallographic parameters (i.e. unit cell dimension) of a grain as these represent the summed effect of all substitutions and crystal defects. We show how Raman microspectrometry can be used as a routine non-destructive tool to obtain rapid measurement of the crystallographic structure of apatite grains etched for FT analysis. Variations of unit cell parameter a are found to correspond to a systematic variation of Raman shift in the range of 452–440 cm^− 1 for measurements made on c-parallel sections of apatite where the direction of the polarized incident beam is parallel to the c axis.     

Parameterisation of the Planetary Boundary Layer for Diagnostic Wind Models

The planetary boundary-layer (PBL) parameterization is a key issue for the definition of initial wind flow fields in diagnostic models. However, PBL theories usually treat separately stable, neutral, and convective stability conditions, so that their implementation in diagnostic wind models is not straightforward. In the present paper, an attempt is made to adopt a comprehensive PBL parameterisation, covering stable/neutral and unstable atmospheric conditions, which appears suitable to diagnostic models. This parameterisation is implemented into our diagnostic mass-consistent code. A validation of the consistency between the implemented PBL parameterisations has been checked through an analysis of the sensitivity of the vertical wind profiles to atmospheric stability.     

POLARIX: a pathfinder mission of X-ray polarimetry

Since the birth of X-ray astronomy, spectral, spatial and timing observation improved dramatically, procuring a wealth of information on the majority of the classes of the celestial sources. Polarimetry, instead, remained basically unprobed. X-ray polarimetry promises to provide additional information procuring two new observable quantities, the degree and the angle of polarization. Polarization from celestial X-ray sources may derive from emission mechanisms themselves such as cyclotron, synchrotron and non-thermal bremsstrahlung, from scattering in aspheric accreting plasmas, such as disks, blobs and columns and from the presence of extreme magnetic field by means of vacuum polarization and birefringence. Matter in strong gravity fields and Quantum Gravity effects can be studied by X-ray polarimetry, too. POLARIX is a mission dedicated to X-ray polarimetry. It exploits the polarimetric response of a Gas Pixel Detector, combined with position sensitivity, that, at the focus of a telescope, results in a huge increase of sensitivity. The heart of the detector is an Application-Specific Integrated Circuit (ASIC) chip with 105,600 pixels each one containing a full complete electronic chain to image the track produced by the photoelectron. Three Gas Pixel Detectors are coupled with three X-ray optics which are the heritage of JET-X mission. A filter wheel hosting calibration sources unpolarized and polarized is dedicated to each detector for periodic on-ground and in-flight calibration. POLARIX will measure time resolved X-ray polarization with an angular resolution of about 20 arcsec in a field of view of 15 × 15 arcmin and with an energy resolution of 20% at 6 keV. The Minimum Detectable Polarization is 12% for a source having a flux of 1 mCrab and 10⁵ s of observing time. The satellite will be placed in an equatorial orbit of 505 km of altitude by a Vega launcher. The telemetry down-link station will be Malindi. The pointing of POLARIX satellite will be gyroless and it will perform a double pointing during the earth occultation of one source, so maximizing the scientific return. POLARIX data are for 75% open to the community while 25% + SVP (Science Verification Phase, 1 month of operation) is dedicated to a core program activity open to the contribution of associated scientists. The planned duration of the mission is one year plus three months of commissioning and SVP, suitable to perform most of the basic science within the reach of this instrument. A nice to have idea is to use the same existing mandrels to build two additional telescopes of iridium with carbon coating plus two more detectors. The effective area in this case would be almost doubled.     

Local And Global Diffusion Along Resonant Lines in Discrete Quasi-integrable Dynamical Systems

We detect and measure diffusion along resonances in a quasi-integrable symplectic map for different values of the perturbation parameter. As in a previously studied Hamiltonian case (Lega et al., 2003) results agree with the prediction of the Nekhoroshev theorem. Moreover, for values of the perturbation parameter slightly below the critical value of the transition between Nekhoroshev and Chirikov regime we have also found a diffusion of some orbits along macroscopic portions of the phase space. Such a diffusion follows in a spectacular way the peculiar structure of resonant lines.     

Finite element analysis of land subsidence above depleted reservoirs with pore pressure gradient and total stress formulations

The solution of the poroelastic equations for predicting land subsidence above productive gas/oil fields may be addressed by the principle of virtual works using either the effective intergranular stress, with the pore pressure gradient regarded as a distributed body force, or the total stress incorporating the pore pressure. In the finite element (FE) method both approaches prove equivalent at the global assembled level. However, at the element level apparently the equivalence does not hold, and the strength source related to the pore pressure seems to generate different local forces on the element nodes. The two formulations are briefly reviewed and discussed for triangular and tetrahedral finite elements. They are shown to yield different results at the global level as well in a three‐dimensional axisymmetric porous medium if the FE integration is performed using the average element‐wise radius. A modification to both formulations is suggested which allows to correctly solve the problem of a finite reservoir with an infinite pressure gradient, i.e. with a pore pressure discontinuity on its boundary. Copyright © 2001 John Wiley & Sons, Ltd.