Study of vibrating foundations considering soil-pile-structure interaction for practical applications

An investigation of soil-pile-structure interaction is carried out, based on a large reciprocating compressor installed on an elevated concrete foundation （table top structure）. A practical method is described for the dynamic analysis, and compared with a 3D finite element （FE） model. Two commercial software packages are used for dynamic analysis considering the soilpile-structure interaction （SPSI）. Stiffness and damping of the pile foundation are generated from a computer program, and then input into the FE model. To examine the SPSI thoroughly, three cases for the soil, piles and superstructure are considered and compared. In the first case, the interaction is fully taken into account, that is, both the superstructure and soil-pile system are flexible. In the second case, the superstructure is flexible but fixed to a rigid base, with no deformation in the base （no SSI）. In the third case, the dynamic soil-pile interaction is taken into account, but the table top structure is assumed to be rigid. From the comparison beteen the results of these three cases some conclusions are made, which could be helpful for engineering practice.     

Simulating the effect of hydrate dissociation on wellhead stability during oil and gas development in deepwater

It is well known that methane hydrate has been identified as an alternative resource due to its massive reserves and clean property. However, hydrate dissociation during oil and gas development (OGD) process in deep water can affect the stability of subsea equipment and formation. Currently, there is a serious lack of studies over quantitative assessment on the effects of hydrate dissociation on wellhead stability. In order to solve this problem, ABAQUS finite element software was used to develop a model and to evaluate the behavior of wellhead caused by hydrate dissociation. The factors that affect the wellhead stability include dissociation range, depth of hydrate formation and mechanical properties of dissociated hydrate region. Based on these, series of simulations were carried out to determine the wellhead displacement. The results revealed that, continuous dissociation of hydrate in homogeneous and isotropic formations can causes the non-linear increment in vertical displacement of wellhead. The displacement of wellhead showed good agreement with the settlement of overlying formations under the same conditions. In addition, the shallower and thicker hydrate formation can aggravate the influence of hydrate dissociation on the wellhead stability. Further, it was observed that with the declining elastic modulus and Poisson’s ratio, the wellhead displacement increases. Hence, these findings not only confirm the effect of hydrate dissociation on the wellhead stability, but also lend support to the actions, such as cooling the drilling fluid, which can reduce the hydrate dissociation range and further make deepwater operations safer and more efficient.     

Vertical atmospheric structure of the late summer clear days over the east Gansu loess plateau in China

In this paper, by using the sounding data collected in LOPEX05, we have analyzed the vertical atmospheric structure and boundary layer characteristics of temperature and humidity in the late summer over the east Gansu loess plateau. The results show that the bottom of the stratosphere is at about 16 500 m and varies between 14 000 m and 18 000 m above the ground. The center of the westerly jet is located between 8300 m and 14 300 m above the ground and its direction moves between 260° and 305°. There is an ...     

Regional Distribution of Perceived Temperatures Estimated by the Human Heat Budget Model （the Klima-Michel Model） in South Korea

The regional distribution of perceived temperatures (PT) for 28 major weather stations in South Korea during the past 22 years (1983–2004) was investigated by employing a human heat budget model, the Klima-Michel model. The frequencies of a cold stress and a heat load by each region were compared. The sensitivity of PT in terms of the input of synoptic meteorological variables were successfully tested. Seogwipo in Jeju Island appears to be the most comfortable city in Korea. Busan also shows a high frequenc...     

Experimental study on the energy dissipation characteristics of debris flow deceleration baffles

Debris flow can cause serious damages to roads, bridges, buildings and other infrastructures.Arranging several rows of deceleration baffles in the significant influence on the mobility and deposition characteristic of debris flow. The deposit amount first increased then decreased when the flow density rises,flow path can reduce the flow velocity and ensure better protection of life and property. In debris flow prevention projects, deceleration baffles can effectively reduce the erosion of the debris flow and prolong the running time of the drainage channel.This study investigated the degree to which a 6 m long flume and three rows of deceleration baffles reduce the debris flow velocity and affect the energy dissipation characteristics. The influential variables include channel slope, debris flow density, and spacing between baffle rows. The experimental results demonstrated that the typical flow pattern was a sudden increase in flow depth and vertical proliferation when debris flow flows through the baffles. Strong turbulence between debris flow and baffles can contribute to energy dissipation and decrease the kinematic velocity considerably. The results showed that the reduction ratio of velocity increased with the increase in debris flow density,channel slope and spacing between rows. Tests phenomena also indicated that debris flow density hasand the deposit amount of debris flow density of 1500kg/m~3 reached the maximum when the experimental flume slope is 12°.     

Local records of long-term dynamics of bamboo gregarious flowering in northern Laos and regional synchronicity of <Emphasis Type="Italic">Dendrocalamus membranaceus</Emphasis> in two flowering sites

Bamboos are widely distributed in mainland Southeast Asia and have abundant biomass. They are characterized by prolonged vegetative growth and semelparity. Where bamboos are dominant, their synchronous flowering and death has a major impact on forest vegetation. Although the small-scale dynamics of this process have become clearer in recent years, the history, geographical scale and synchronicity of bamboo flowering over broad areas remains unknown. This study focused on the flowering history of six bamboo species, Bambusa tulda, Cephalostachyum virgatum, Dendrocalamus hamiltonii, Dendrocalamus membranaceus, Indosasa sinica and Oxytenanthera parvifolia, over 40 years across a broad area of northern Laos. We also examined the synchronicity of flowering in D. membranaceus. We visited 49 villages in northern Laos and surveyed knowledgeable inhabitants about bamboo flowering history. The timing, scale and synchronicity of gregarious flowering varied among species. D. hamiltonii and D. membranaceus showed higher flowering synchronicity than other species. All the species except I. sinica had both sporadic and gregarious flowering traits, and showed conspicuous variability in their flowering scale. The flowering bamboo population at two gregarious flowering sites for D. membranaceus was surveyed. While this species had the highest synchronicity in this study, its synchronicity was lower than other species in previous studies worldwide. We found that the gregarious flowering of bamboos in northern Laos over the last 40 years showed lower synchronicity than bamboo flowering reported in other areas of the world. The historical dynamics and scale of bamboo flowering must be further clarified to understand the vegetation composition of this area.     

Temporal changes in wetland plant communities with decades of cumulative water pollution in two plateau lakes in China’s Yunnan Province

Wetland plant communities in the plateau lakes of Yunnan Province, China, have decreased significantly over the past decades. To better understand this degradation, we analyzed the processes and characteristics of changes in wetland plant communities in two of the largest lakes in Yunnan Province, Dianchi and Erhai lakes. We collected records of native and alien plant communities in the two lakes from literature published from the 1950s to current period. We calculated plant community types and their area in some historical periods when related data were reported, and analyzed the relationship between changes in plant communities and water pollution. In Dianchi Lake, 12 community types of native plant communities, covering over 80% of the surface in the 1950s and 1960s, were reduced to four types covering 2.4% by the late 2000s. Alien plant communities started to appear in the lake in the late 1970s, and have since come to cover 4.9% of the lake surface, thereby becoming dominant. In Erhai Lake, 16 community types of native plant communities, covering 47.1% of the lake surface in the late 1970s, declined to 10 community types, covering 9.3% of the surface, by the late 2000s. Alien plant communities appeared in the middle 1980s, and at present cover 0.7% of the surface area. It was indicated that changes in plant communities were significant related to water eutrophication. The area occupied by native and alien plant communities was, respectively, negatively and positively related to the content of nutrients in water. This showed lacustrine pollution played an important role in native plant loss and alien plant invasion in the two plateau lakes.     

Characteristics and interpretation of the seismic signal of a field-scale landslide dam failure experiment

Outburst floods caused by breaches of landslide dams may cause serious damages and loss of lives in downstream areas; for this reason the study of the dynamic of the process is of particular interest for hazard and risk assessment. In this paper we report a field-scale landslide dam failure experiment conducted in Nantou County, in the central of Taiwan.The seismic signal generated during the dam failure was monitored using a broadband seismometer and the signal was used to study the dam failure process.We used the short-time Fourier transform(STFT) to obtain the time–frequency characteristics of the signal and analyzed the correlation between the power spectrum density(PSD) of the signal and the water level. The results indicate that the seismic signal generated during the process consisted of three components: a low-frequency band(0–1.5 Hz), an intermediate-frequency band(1.5–10 Hz) and a highfrequency band(10–45 Hz). We obtained the characteristics of each frequency band and the variations of the signal in various stages of the landslide dam failure process. We determined the cause for the signal changes in each frequency band and its relationship with the dam failure process. The PSD sediment flux estimation model was used to interpret the causes of variations in the signal energy before the dam failure and the clockwise hysteresis during the failure. Our results show that the seismic signal reflects the physical characteristics of the landslide dam failure process. The method and equipment used in this study may be used to monitor landslide dams and providing early warnings for dam failures.     

Spatial patterns and storage composition of woody debris in a natural secondary forest dominated by <Emphasis Type="Italic">Pinus tabulaeformis</Emphasis> on Loess Plateau,China

Woody debris (WD) is an important part of natural Pinus tabulaeformis mixed stands, and it affects the forest ecosystem stability and development. The WD spatial patterns are especially important structural characteristics that can provide insights into forest dynamics. In this paper, the WD storage, WD spatial patterns and WD associations among the main species were examined in the natural secondary forest on Loess Plateau in northwest China. Data were collected in a 1 ha (100 m × 100 m) permanent plot, and all the trees with a diameter at breast height of more than 3 cm were measured and stem-mapped. Ripley’s K functions from the spatial-point-pattern-analysis method were used to analyze the spatial distribution and associations. The results showed that: (1) The total storage of WD was 10.73 t/ha, fallen wood was the main source of WD, and the majority diameters were greater than 20 cm, and in intermediate levels of decay; (2) The overall spatial pattern was closely related to the spatial scale, which exhibited an aggregated pattern on a small scale, and a random pattern on a large scale. The spatial patterns of coarse woody debris also gradually transitioned from an aggregated pattern in fine scales to a random pattern in broader spatial scales, which matched the overall spatial pattern. The spatial intensity was gradually decreased with the increasing diameters, and increased with the decomposition classes; (3) The WD of Pinus tabulaeformis species was negatively associated with Betula platyphylla and Populus davidiana on a small scale but positively associated with these species on a large scale. The spatial pattern and interspecies relations were the results of long-term interactions between the natural secondary forest community and the surrounding natural environment. These findings would provide a scientific basis for the sustainable management and protection of natural secondary forest ecosystems on Loess Plateau.     

A novel model to assess soil productivity in the dry-hot valleys of China

Accurate evaluation of soil productivity has been a long-standing challenge. Although numerous models for productivity assessment exist, most are cumbersome to use and require substantial parameter inputs. We developed a new empirical soil productivity model based on field investigations of soil erosion, soil physicochemical properties, and crop yields in the dry-hot valleys (DHVs) in China. We found that soil pH, and organic matter and available potassium contents significantly affected crop yields under eroded conditions of the DHVs. Moreover, available potassium content was the key factor affecting soil productivity. We then modified an existing soil productivity model by adding the following parameters: contents of effective water, potassium, organic matter, and clay, soil pH, and root weighting factor. The modified soil productivity model explained 63.5% of the crop yield. We concluded that the new model was simple, realistic, and exhibited strong predictability. In addition to providing an accurate assessment of soil productivity, our model could potentially be applied as a soil module in comprehensive crop models.