Geodetic constraints on the period of episodic tremors and slips using least squares harmonic estimation method with application to Cascadia subduction zone

It is expected that episodic tremors and slips (ETS) as a type of slow earthquakes with periodic property will be detected using harmonic estimation techniques. The principal goal of this paper is the detection of these kinds of earthquakes using least squares harmonic estimation (LSHE). To accomplish this, the raw time series of 38 permanent GPS stations of the Pacific Northwest Geodetic Array have been analyzed. Previously, some independent techniques could confirm the occurrences of the aforementioned quakes at these stations. However, the current research intends to evaluate the spectrum of each of the de-trended time series using the LS-HE method. In each station, the period of the detected harmonic with the maximum power spectrum is equivalent to the average period previously reported for these events. According to the obtained results, the recurrence interval of these events ranges from 9 months to 3 years. In sum, the study confirms this method being efficient for investigating the occurrences of ETSs when the length of the GPS time series is sufficiently large.     

Calcareous nannofossil biostratigraphy of the Paleocene at the Misheiti section,East Central Sinai,Egypt

Integration of calcareous nannofossil data, δ¹³C and δ¹⁸O values, and carbonate contents of the lower Paleocene–upper Paleocene sequence that crops out at the Misheiti section, East Central Sinai, Egypt, were used to denote the Danian/Selandian (D/S) and Selandian/Thanetian (S/T) stage boundaries. The study interval belongs to the Dakhla and Tarawan formations. Four calcareous nannofossil zones (NP4, NP5, NP6, and NP7/8) were recognized. The base of the Selandian Stage is tentatively placed at the lowest occurrences (LOs) of taxa ascribable to the second radiation of fasciculiths (i.e., Lithoptychius janii). This level is marked by a sudden drop of δ¹³C and δ¹⁸O values and carbonate content. No distinctive lithological changes were observed across the D/S boundary at the study section. A hiatus at the NP5/NP6 zonal boundary is indicated by the condensation of zones NP5 and NP6.The base of the Thanetian is placed at the base of Zone NP7/8 at the lithological change observed in correspondence to the boundary between the Dakhla and Tarawan formations. The δ¹³C and δ¹⁸O values abruptly decrease slightly above the base of Zone NP7/8. No consistent variations in the carbonate contents were recorded within Zone NP6 or across the NP6/NP7/8 zonal boundary.     

Scour and flow field around a spur dike in a 90° bend

Spur dike is an important element in fiver training that creates rapid variations in flow field, sediment transport and bed topography. The mechanism of flow and sediment transport in a channel bend is very complex, especially when a spur dike is constructed in a bend. Most of previous investigations on flow behavior and scour around spur dike were carried out in straight channels. In this paper results of experiments on flow field and scour around a spur dike in a 90 degree channel bend are presented, Sand with uniform grain size was used as the bed material, Experiments were conducted for different locations and different lengths of spur dikes at the bend with different values of discharge, The three dimensional flow fields around a spur dike were investigated, The maximum depth of scour was correlated to the Froude numbers, lengths and the locations of spur dike in the bend.     

Analytical‐numerical solution for stress distribution around tunnel reinforced by radial fully grouted rockbolts

This paper presents an analytical‐numerical approach to obtain the distribution of stresses and deformations around a reinforced tunnel. The increase in the radial stress of the reinforced tunnel, based on the performance of a bolt, is modeled by a function, which its maximum value is in the vicinity of the bolt periphery and it exponentially decreases in the far distance from the bolt. On the basis of this approach, the shear stiffness between the bolt and the rock mass and the shear stress distribution around the bolt within the rock mass are also analytically obtained. The results are compared with those obtained by the assumption of ‘uniform increase of radial stress’ method, which is made by the previous studies. The analyses show when the bolts' spacing is large, the safety factor must be increased if the ‘uniform increase of radial stress’ method is used for the design. Finally, a procedure is introduced to calculate the non‐equal deformation of the rock mass between the bolts at any radius that can be useful to compute the bending moment in shotcrete layer in New Austrian Tunnelling Method (NATM) approach. Copyright © 2016 John Wiley & Sons, Ltd.     

The Bam Earthquake of 26 December 2003

The devastating earthquake of 26 December 2003 claimed more than 26,000 lives in the city of Bam and surrounding towns and villages in Southeast Iran, and left the majority of the Bam population homeless. The reason for this tragedy was an unfortunate combination of geological, social and human circumstances. The causative fault practically traversed the city of Bam and the earthquake occurred at a shallow depth. The residential buildings were completely inappropriate for a seismic region, being extremely vulnerable to earthquake shaking, and the earthquake occurred early in the morning when most people were still sleeping. The damage pattern was nearly symmetric about a line 3 km to the west of the surface expression of the Bam fault, and the damage attenuated rapidly with distance from this line. The industrial facilities and the lifelines performed relatively well and experienced slight to moderate damage, but this might have been due to their distance from the earthquake epicentre. However, many of the qanat (traditional subterranean irrigation channels) chains that served the twin cities of Bam and Baravat collapsed. Emergency facilities (hospitals, police and fire stations), schools and the university were destroyed and/or heavily damaged during the earthquake. The geotechnical effects of the earthquake were not significant. There was little evidence that site response effects played a major role in the damage pattern in the city. There were no reports of liquefaction and only minor sliding activity took place during the event. A unique set of strong motion acceleration recordings were obtained at the Bam accelerograph station. The highest peak ground acceleration (nearly 1g) was recorded for the vertical component of the motion. However, the longitudinal component (fault-parallel motion in N–S direction) clearly had the largest energy flux, as well as the largest maximum velocity and displacement.     

Performance of Hybrid SCA-RF and HHO-RF Models for Predicting Backbreak in Open-Pit Mine Blasting Operations

Natural Resources Research - Backbreak is an adverse phenomenon in blasting operation, which can cause, among others, mine walls instability, falling down of machinery, drilling efficiency...     

On the relationship between MODIS Land Surface Temperature and topography in Iran

Land Surface Temperature (LST) is considered important in monitoring the energy flux between the land surface and atmosphere. Due to the diversity of topography in Iran and its effect on the climate diversity, we decided to study the effect of topography on the LST variations. To this end, the LST digital data derived from the observations of the MODIS Terra and Aqua were used. The results indicated that, during the daytime, from sea level up to a height of 400 meters, the LST increased, and then the temperature decreased with increasing altitude, and up to a height of 3000 meters, there was a strong correlation between the two. LST lapse rate was more during the daytime compared with that of the night time and it was more during the winter compared with the summer. LST lapse rate showed larger variability in diurnal cycle, but its monthly patterns were similar in different aspects. The aspect had substantial effect on LST inversion elevation. Furthermore, the inverse relationship between LST and slope was strong in slopes up to 20°.     

Tidal asymmetry in a tidal creek with mixed mainly semidiurnal tide,Bushehr Port,Persian Gulf

This study investigated the tidal asymmetry imposed by both the interaction of principal tides and the higher harmonics generated by distortions within a tidal creek network with mixed mainly semidiurnal tide in the Bushehr Port, Persian Gulf. Since velocity and water-level imposed by principal triad tides K₁-O₁-M₂ are in quadrature, duration asymmetries during a tidal period in this short, shallow inverse estuary should be manifest as skewed velocities. The principal tides produce periodic asymmetries including a strong ebb-dominance and a weak flood-dominance condition during spring and neap tides respectively. The higher harmonics induced by nonlinearities engender a flood-dominance condition where the convergence effects are higher than frictional effects, and an ebbdominance condition where intertidal storage are extended. Since the triad K₁-O₁-M₂ driven asymmetry is not overcome by higher harmonics close to the mouth, the periodic asymmetry dominates within the creek in which higher harmonics reinforce the weak flood-dominance (strong ebb-dominance) condition in the convergent channel (divergent area). Also, the maximum flood and the maximum ebb from all harmonic constituents occurred close to high water slack time during both spring and neap tides in this short creek. Since occational wetting of intertidal areas happened close to the high water (HW) time during spring tide, the water level flooded slowly close to the HW time of the spring tide.