Abrupt change in magma generation processes across the Central American arc in southeastern Guatemala: flux-dominated melting near the base of the wedge to decompression melting near the top of the wedge

Lavas erupted behind the volcanic front in southeastern Guatemala have many important distinctions from lavas erupted on the volcanic front. These include: generally higher MgO, Nb, Sr, TiO₂, and rare earth element concentrations; higher La/Yb and Nb/Y ratios; and lower Ba/La, La/Nb, Ba/Zr and Zr/Nb ratios. These major and trace element distinctions are caused by reduced fractionation during ascent and storage in the crust, lower degrees of melting in the source, and greatly reduced contributions from the subducted Cocos plate in the source. In addition, because all of these important distinctions are even borne in lavas erupted within 20 km of the front, there is little apparent petrogenetic continuity between front and behind-the-front magmas. What little geochemical continuity exists is in radiogenic isotopes: ¹⁴³Nd/¹⁴⁴Nd falls across the arc, Pb isotopic ratios (except ²⁰⁶Pb/²⁰⁴Pb) rise across the arc, and ⁸⁷Sr/⁸⁶Sr rise across the arc after an initial discontinuity within 20 km of the front. These continuous across-arc changes in radiogenic isotopes are caused by increased contamination with older, more isotopically disparate rocks, away from the front. Once the effects of crustal contamination are removed, the remaining isotopic variability behind the front is non-systematic and reflects the inherent isotopic heterogeneity of the source, the mantle wedge. Geochemical disconnection in southeastern Guatemala suggests that behind-the-front magmas are produced by decompression melting near the top of the wedge, not by flux-dominated melting near the base of the wedge.     

Seismic reflection survey of an oblique aseismic basement trend on the Reykjanes Ridge

A detailed (5 km track separation) seismic reflection survey of a portion of the upper flank of Reykjanes Ridge supports the existence of an oblique aseismic ridge, previously postulated from other data. The oblique basement ridge may have been formed by a magma center moving southwest under this portion of the Reykjanes Ridge at about 6 cm/yr between 7 and 5 mbyp. The oblique ridge is complex, being interrupted by saddles about every 30 km length. This spacing could reflect incipient, very weakly developed transverse fractures, or more probably the concentration of volcanic activity at particularly active vents, which shift southwestward every million years or so in response to the south-westward moving magma chambers entrained in the asthenosphere. Minor irregularities in the oblique ridge parallel crustal isochrons; such small features are probably elongate fissure eruptions restricted to a narrow spreading axis.     

Mechanics of growth of some laccolithic intrusions in the Henry mountains, Utah, I: Field observations, Gilbert's model, physical properties and flow of the magma

The shapes of sills and laccolithic intrusions and associated host rock deformation were studied at several locations on the flanks of the Henry Mountains. Diorite sills range from 0.5 to 10 m in thickness, are less than 1 km² in areal extent, and have blunt terminations. The laccolithic intrusions range from 10 to 200 m in thickness, and from 1 to 3 km² in areal extent. The host rock, principally sandstone and shale, is deformed along closely spaced cataclastic shear planes. This deformation is concentrated at contacts, especially near sill terminations and over laccolith peripheries. The diorite contains plagioclase phenocrysts which are usually sheared in a thin zone adjacent to each contact. Field observations suggest that sills are the forerunners of laccolithic intrusions which form only after magma has spread far enough laterally (greater than about 1 km² in the Henry Mountains) to gain leverage to bend the overburden upward. Further injection of magma results in laccolithic peripheries or terminations with one of three distinct cross-sectional forms: (1) blunt termination of the diorite accompanied by bending and minor faulting of the host rock; (2) termination at a peripheral diorite dike cutting upward across the host rock; or (3) abrupt termination of the diorite against a nearly vertical fault zone.In order to study some of the processes of sill and laccolith intrusion, mechanical models for the driving pressure, physical properties, and flow behavior of the diorite magma are derived and discussed. A static driving pressure (equal to the difference between total magma pressure and lithostatic pressure) of up to 700 bar is estimated. The rheological behavior of the magma in the Henry Mountains is unknown. However, flow behavior is calculated assuming three of the more common models for fluids: Newtonian viscous, pseudoplastic, and Bingham. Suspended crystals probably contributed to the finite strength of the magma (estimated to be at least 10³ dyn/cm² for the Henry Mountains magma) which enables it to support dense zenoliths and also fixes maximum limits on the lengths of sills or dikes. Pressure in magma flowing along tabular intrusions of uniform thickness drops linearly in the flow direction for all three rheological materials. Thickening of tabular intrusions tends to make the pressure drop less rapidly, but pressure drops more rapidly in the tapered region near a termination. Pressure distributions under these and other conditions are derived in order to use them in the models of host rock deformation presented in Part II.     

An experiment on reservoir representation schemes to improve hydrologic prediction: coupling the national water model with the HEC-ResSim

ABSTRACT

This study experiments with reservoir representation schemes to improve the ability to model active water management in the National Water Model (NWM). For this purpose, we developed an integrated water management model, NWM-ResSim, by coupling the NWM with HEC-ResSim, and two reservoir representation schemes are tested: simulation of reservoir operations and retrieval of scheduled operations. The experiments focus on a pilot reservoir domain in the Russian River basin – Lake Mendocino, California – and its contributing watershed. The evaluation results suggest that the NWM-ResSim improves the simulation performance of reservoir outflow from this managed reservoir over the NWM default level pool routing scheme. The degree of this improvement depends on the suitability of the operation guidance; the reservoir operations simulation scheme could have acceptable errors for the purposes of water resources management, but not for flood operations. Results of the retrieval scheme of scheduled operations demonstrated better performance for sub-daily flood operations.     

On the application of the mode-acceleration method to structural engineering problems

Mode-superposition has been extensively used in computing the dynamic response of complex structures. Two versions of mode-superposition, namely the mode-displacement method and the mode-acceleration method, have been employed. The present paper summarizes the results of a systematic study comparing the accuracy of the mode-displacement and mode-acceleration methods when applied to structures with various levels of damping or various excitation frequencies. The paper also discusses several details concerning the implementation of the mode-acceleration method.     

Ca II resonance lines in non-homogeneous chromospheres

Profiles of the K line of Caii are computed for a two component solar chromosphere, chosen to simulate with a simple geometry the chromospheric supergranular network. Each component rises above the BCA photosphere, the boundary component representing the bright network with a sharp temperature rise and the cell component representing the darker region with an extended temperature minimum. Theoretical intensity profiles of the Can K core, calculated as weighted averages over the projected areas of the components, are produced for = 0.6 and 0.3. The line source function and the optical depth are obtained from a self-consistent treatment of the steady state and radiative transfer equations, with complete redistribution assumed for scattering in the line. The atomic model consists of two bound levels and a continuum. It is found that a 4600 K minimum can lead to the successful theoretical prediction of the observed limb darkening and 4300 K radiation temperature of the K1 feature only when very large values of turbulent velocity are assumed to exist in the cell region.Publications of the Goethe Link Observatory, Indiana University, No. 95.     

黑龙江嘉荫地区白垩纪-第三纪界线初步观察

本文报道了黑龙江嘉荫白山头地区一条新的地层剖面及其K／T界线的初步研究。新命名的“白山头段”代表乌云组下部的早古新世地层,含以Tiliaephyllum tsagajanicum等为代表的达宁早期植物化石。在白山头剖面上,作者发现可能为白垩纪末期的凝灰岩。结合与俄罗斯布列亚盆地含K／T界线的查加扬群标准剖面的对比,推测嘉荫地区的K／T界线可能位于白山头段底部与上述凝灰岩之上的一层炭质泥岩之间。     

Spatially explicit measures of production of young alewives in Lake Michigan: Linkage between essential fish habitat and recruitment

The identification and protection of essential habitats for early life stages of fishes are necessary to sustain fish stocks. Essential fish habitat for early life stages may be defined as areas where fish densities, growth, survival, or production rates are relatively high. To identify critical habitats for young-of-year (YOY) alewives (Alosa pseud oharengus) in Lake Michigan, we integrated bioenergetics models with GIS (Geographic Information Systems) to generate spatially explicit estimates of potential population production (an index of habitat quality). These estimates were based upon YOY alewife bioenergetic growth rate potential and their salmonine predators’ consumptive demand. We compared estimates of potential population production to YOY alewife yield (an index of habitat importance). Our analysis suggested that during 1994–1995, YOY alewife habitat quality and yield varied widely throughout Lake Michigan. Spatial patterns of alewife yield were not significantly correlated to habitat quality. Various mechanisms (e.g., predator migrations, lake circulation patterns, alternative strategies) may preclude YOY alewives from concentrating in areas of high habitat quality in Lake Michigan.     

Effect of nutrient loading on Atlantic menhaden (<Emphasis Type="Italic">Brevoortia tyrannus</Emphasis>) growth rate potential in the Patuxent River

We linked a 2-dimensional water quality model of the Patuxent River with a spatially-explicit model of fish growth to simulate how changes in land use in the Patuxent River Basin would affect the growth rate potential (GRP) of Atlantic menhaden (Brevoortia tyrannus). Simulations of three land-use patterns that reflected current nutrient loadings, increased nutrient loadings, and decreased nutrient loadings were used to drive the water quality model. Changes in nutrient loadings caused changes in the timing and intensity of phytoplankton concentrations and the region of hypoxia increased during summer with increased nutrient loading. The spatial distribution of menhaden GRP was highly correlated with phytoplankton concentrations and localized in the middle on third of the Patuxent River. Menhaden growth rate was highest in early June and late summer. During June, menhaden GRP (and phytoplankton concentration) was lowest at the lower nutrient loading simulation. During late summer, mean menhaden growth rates were inversely proportional to nutrient loading rates and menhaden grew best when nutrient loadings were the lowest. Upriver to mid-river phytoplankton patches drove overall mean calculations. Model results suggest that more research is needed on water quality model predictions of phytoplankton levels at a high level of spatial and temporal resolution, menhaden foraging, and menhaden habitat selection.