Optimization of dissolved urea measurements in coastal waters with the combination of a single reagent and high temperature

Urea is an unstable and intermediate organic nitrogenous compound present in coastal environments and is derived from the excretion of some aquatic organisms and wastewater discharges. Urea plays an important role in the nitrogen cycle, where it is utilized by algae, including diatoms. However, there are very limited relevant data on the production, consumption, and degradation of urea because of the lack of appropriate measurement techniques. The conventional method is based on the formation of a colored product when urea reacts with diacetyl monoxime in a sulfuric acid solution. We examined the optimal conditions for the formation of the colored product; specifically, we evaluated different temperatures (22–80 °C), reaction times, mixing ratios of color reagents, and sample storage times. Application of the single mixed color-developing reagent (COLDER) at 70 °C resulted in the optimal formation of the colored product within a short reaction time of 60 min. This method was then used to measure dissolved urea in different coastal environments. The concentrations detected were as follows: 0.65–0.72, 0.49–0.58, and 1.09–2.28 µM urea-N at coral reef, seagrass, and mangrove sites, respectively. Our results showed high precision (SD = 0.02, CV = 1.2%), a low detection limit (0.03 µM urea-N), and a high recovery rate (94–99%). In summary, this high-temperature procedure for urea measurements should be valuable for obtaining high-precision data that can further the understanding of urea dynamics and its role in coastal ecosystems.     

Finite‐element analysis of laminated rubber bearing of building frame under seismic excitation

Finite element analysis is carried out for a building frame supported by laminated rubber bearings to simultaneously investigate global displacement and local stress responses under seismic excitation. The frame members and the rubber bearings are discretized into hexahedral solid elements with more than 3 million degrees of freedom. The material property of rubber is represented by the Ogden model, and the frame is assumed to remain in elastic range. It is shown that the time histories of non‐uniform stress distribution and rocking behavior of the rubber bearings under a frame subjected to seismic excitation can be successfully evaluated, and detailed responses of base and frame can be evaluated through large‐scale finite element analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Deep water observations of extreme waves with moored and free GPS buoys

Point-positioning GPS-based wave measurements were conducted by deep ocean (over 5,000 m) surface buoys moored in the North West Pacific Ocean in 2009, 2012, and 2013. The observed surface elevation bears statistical characteristics of Gaussian, spectrally narrow ocean waves. The tail of the averaged spectrum follows the frequency to the power of ?4 slope, and the significant wave height and period satisfies the Toba’s 3/2 law. The observations compare well with a numerical wave hindcast. Two large freak waves exceeding 13 m in height were observed in October 2009 and three extreme waves around 20 m in height were observed in October 2012 and in January 2013. These extreme events are associated with passages of a typhoon and a mid-latitude cyclone. Horizontal movement of the buoy revealed that the orbital motion of the waves at the peak of the wave group mostly exceed the weakly nonlinear estimate. For some cases, the orbital velocity exceeded the group velocity, which might indicate a breaking event but is not conclusive yet.     

Spatial distribution of sister species of vesicomyid bivalves Calyptogena okutanii and Calyptogena soyoae along an environmental gradient in chemosynthetic biological communities in Japan

Vesicomyid bivalves have a substantial biomass in deep-sea chemosynthetic biological communities in the Pacific. Using a novel multiplex-PCR (mPCR) method to identify the co-occurring vesicomyids in Sagami Bay, we analyzed the distribution of Calyptogena okutanii and Calyptogena soyoae along environmental gradients. All the known distributions of C. okutanii indicated the different preferences in salinity and temperature to those of C. soyoae, and in Sagami Bay, depth seemed to be an important environmental factor, too. Although the concentration of hydrogen sulfide in sediment was not examined, our results showed that the distributions of these two Calyptogena clams were affected by salinity and temperature.     

Detection and temporal variation of Co in the digestive glands of the common octopus, Octopus vulgaris, in the East China Sea

⁶⁰Co were detected in common octopus specimens collected in the East China Sea in 1996-2005. The source of ⁶⁰Co has remained unclear yet. Stable isotope analyses showed that there was no difference in stable Co concentrations between octopus samples with ⁶⁰Co and without ⁶⁰Co. This result showed that the stable Co in the digestive gland of octopus potentially did not include a trace amount of ⁶⁰Co and the source of ⁶⁰Co existed independently. Furthermore, investigations of octopus in other area and other species indicated that the origin of the source of ⁶⁰Co occurred locally in the restricted area in the East China Sea and not in the coastal area of Japan. Concentrations of ⁶⁰Co have annually decreased with shorter half-life than the physical half-life. This decrease tendency suggests that the sources of ⁶⁰Co were identical and were temporary dumped into the East China Sea as a solid waste.     

Seismological asperities from the point of view of dynamic rupture modeling: the 2007 Mw6.6 Chuetsu-Oki,Japan, earthquake

We study the ground motion simulations based on three finite-source models for the 2007 Mw6.6 Niigata Chuetsu-oki, Japan, earthquake in order to discuss the performance of the input ground motion estimations for the near-field seismic hazard analysis. The three models include a kinematic source inverted from the regional accelerations, a dynamic source on a planar fault with three asperities inferred from the very-near-field ground motion particle motions, and another dynamic source model with conjugate fault segments. The ground motions are calculated for an available 3D geological model using a finite-difference method. For the comparison, we apply a goodness-of-fit score to the ground motion parameters at different stations, including the nearest one that is almost directly above the ruptured fault segments. The dynamic rupture models show good performance. We find that seismologically inferred earthquake asperities on a single fault plane can be expressed with two conjugate segments. The rupture transfer from one segment to another can generate a significant radiation; this could be interpreted as an asperity projected onto a single fault plane. This example illustrates the importance of the fault geometry that has to be taken into account when estimating the very-near-field ground motion.     

Integrated magnetobiochronology of the Pliocene–Pleistocene Miyazaki succession,southern Kyushu,southwest Japan: Implications for an Early Pleistocene hiatus and defining the base of the Gelasian (P/P boundary type section) in Japan

An integrated magnetobiochronology of the Miyazaki Pliocene–Pleistocene succession in the Miyazaki area, southwest Japan, was established using planktic foraminiferal and calcareous nannofossil biostratigraphy together with paleomagnetic data. The upper Miyazaki succession in the northern Miyazaki region can be divided into the Takanabe, Hisamine (redefined), and Higoyashiki (new) Formations, in ascending order. A depositional hiatus between the Hisamine Formation and the Takanabe and/or older formations was also identified based on integrated magnetobiostratigraphy from five sections including the Nagatani River (NGT) section through the uppermost Miyazaki succession. The hiatus, herein called the Hisamine unconformity, is equivalent to the Kurotaki unconformity between the Miura and Kazusa groups of the Boso Peninsula in central Japan. The depositional hiatus recognised in the lower Pleistocene of Pacific coastal areas in southwestern and central Japan may have resulted from tectonic activity associated with a change in the subduction direction of the Philippine Sea plate, which commenced prior to ca. 2.2 Ma. The youngest unit just below the hiatus is the upper part of the Takanabe Formation in the NGT section. The NGT section represents the continuous Late Pliocene to earliest Pleistocene sequence including the Gauss/Matuyama boundary and is here proposed as the type section for the Pliocene/Pleistocene boundary in Japan, which the IUGS ratified as the base of the Gelasian in 2009.     

Formation process of pyrite polyframboid based on the heavy-metal analysis by micro-PIXE

Pyrite framboid in sedimentary rocks could be concerned with arsenic contamination in groundwater of acidic environment and has been studied for the formation process of its unique morphology. However, not much has been discussed about the formation process based on the heavy-metal distribution in pyrite framboids and their aggregates. To reveal the formation process of pyrite framboids and their aggregates, mudstone from the Late Cretaceous Hakobuchi Group, central Hokkaido, Japan, are investigated for mode, petrographical, mineralogical, and micro-PIXE (particle-induced X-ray emission) analysis in this study. Spherical and sub-spherical pyrite framboids observed in polyframboids can be divided into two types based on the diameter of framboids (D) and the average diameter of microcrystals (d) within framboids: type 1, ranging from 2 to 9 μm and from 0.4 to 0.9 μm, respectively, and type 2, ranging from 8 to 50 μm and from 0.5 to 1.8 μm, respectively. Based on the quantitative traverse analyses and 2-D elemental mapping results by micro-PIXE, heterogeneities in the concentrations of heavy metals within the analyzed aggregations of pyrite are exhibited. On the basis of the As and Pb zoning patterns, the time range and chronological stages of pyrite-aggregation growth are revealed.     

Prediction of ground motion in the Osaka sedimentary basin associated with the hypothetical Nankai earthquake

We studied the long-period ground motions in the Osaka sedimentary basin, Japan, which contains a 1- to 3-km thickness of sediments and is the site of many buildings or construction structures with long-natural period. We simulated the broadband ground motions likely to be produced by the hypothetical Nankai earthquake: the earthquake expected to give rise to the most severe long-period ground motion within the basin. For the simulation, we constructed multiscale heterogeneous source models based on the Central Disaster Management Council of Japan (CDMC) source model and adopted a hybrid computation method in which long-period motion and short-period motion are computed using a 3-D finite difference method and the stochastic Green’s function method, respectively. In computing long-period motions, we used a 3-D structure model of the crust and the Osaka sedimentary basin. The ground motions are estimated to have peak velocities of 50–90 cm/s, prolonged durations exceeding 300 s, and long predominant periods of 5–10 s in the area with great thickness of sediments. The predominant periods are in agreement with an approximate evaluation by 4 H/V _s where H and V _s are the thickness of the sediment and the average S wave velocity, respectively.