Structural changes of synthetic opal by heat treatment

The structural changes of synthetic opal by heat treatment up to 1,400 °C were investigated using scanning electron microscopy, X-ray diffraction, and Fourier transform infrared and Raman spectroscopies. The results indicate that the dehydration and condensation of silanol in opal are very important factors in the structural evolution of heat-treated synthetic opal. Synthetic opal releases water molecules and silanols by heat treatment up to 400 °C, where the dehydration of silanol may lead to the condensation of a new Si–O–Si network comprising a four-membered ring structure of SiO₄ tetrahedra, even at 400 °C. Above 600 °C, water molecules are lost and the opal surface and internal silanol molecules are completely dehydrated by heat effect, and the medium-temperature range structure of opal may begin to thermally reconstruct to six-membered rings of SiO₄ tetrahedra. Above 1,000 °C, the opal structure almost approaches that of silica glass with an average structure of six-membered rings. Above 1,200 °C, the opal changes to low-cristobalite; however, minor evidence of low-tridymite stacking was evident after heat treatment at 1,400 °C.     

Use of cokriging to estimate surface air temperature from elevation

Summary Surface air temperature in central Japan was predicted from the temperature recordings from sensors in the Automated Meteorological Data Acquisition System (AMeDAS), using seven different procedures: the usual simple and universal kriging and cokriging estimators, the traditional regression analysis and the inverse distance weighted method. The cokriging estimator integrated digital elevation data as well as the air temperature readings. The performance of the procedures was evaluated and compared using cross-validation.The kriging estimator provided a better estimate than the traditional regression analysis that treated the data as spatially independent observations. The kriging estimate was also better than the inverse distance weighted method. Further improvement in the estimation accuracy was achieved by using cokriging procedures because of high correlation of air temperature with elevation. The accuracy of spatial prediction decreased due to nocturnal cooling in winter and daytime heating in summer. This decrease implies that a strong radiation balance at the surface, whether positive or negative, causes a relatively short-range variation in surface air temperature through the effects of local environments.With 8 Figures     

Impact of land uses on heavy metal distribution in the Selenga River system in Mongolia

The Selenga River contributes to 50% of the total inflow to Lake Baikal. Large tracts of the Selenga River Basin have been developed for industry, urbanization, mining, and agriculture, resulting in the release of suspended solids (SS) that affect downstream water quality and primary productivity. This study addressed SS as the main factor controlling pollutant transport and the primary indicator of land degradation in the Selenga River system. Tributaries with larger areas dedicated to agricultural use had higher SS concentrations, reaching 862 mg L^?1, especially during the high runoff and intensive cultivation season. Although the large SS flux was detected in the main river, the small tributaries were distinguished by high SS concentrations. The high SS concentration corresponded to widespread development in the watershed. Watersheds with high potential of SS release are sensitive to intensive land uses. SS in the river system had a constant elemental composition consisting mainly of Fe and Al oxides, indicating that surface soils were major constituents of the tributary SS. Three minor heavy metals (Zn, Cu, and Cr) appeared in high concentrations downstream of urban and mining areas (two- to sixfold increases), indicating that these contaminants are carried by SS. At two tributary junctions, the concentration of contaminants on the SS decreased due to a large influx of SS with low heavy metal contents. Changes in electric conductivity and pH at downstream of tributary junctions enhanced the sedimentation of SS and the removal of contaminants from the water phase after aggregation of the SS. Land use changes in the tributary watersheds are major controlling factors for the fate of contaminants in the river system.     

宝鸡古土壤层S7和黄土层L8的天然剩磁锁定深度初探

详细的古地磁及岩石磁学研究表明磁铁矿和赤铁矿是宝鸡古土壤层S7和黄土层L8的特征剩磁的主要载磁矿物,在稳定的正反极性期间,这两种磁性矿物携带的剩磁方向完全一致。然而,在地磁漂移事件或者松山-布容（M-B）极性转换的过程中,这两种载磁矿物有时携带的剩磁方向不同。高分辨率的磁性地层结果证实宝鸡古土壤层S7和黄土层L8能记录300500年的短期地球磁场极性倒转事件。经与日本大阪湾高分辨率的海洋沉积物中记录的同期短期极性倒转事件相比,估算宝鸡剖面土壤层S7和黄土层L8的天然剩磁锁定深度小于58cm。     

Chlorophyll a Biomass of Netplankton in Surface Waters in the Pacific Sector of the Southern Ocean in Austral Summer

Chlorophyll a of total and particles retained on 30 μm mesh plankton net were both determined in surface waters along two cruise tracks ranging from the Subtropical water to the marginal ice zone in the Pacific sector of the Southern Ocean in austral summer. Total surface chlorophyll a in the study area was mostly less than 1 μg chl a 1⁻¹, and showed distributions with no obvious trend associated with different waters masses of the Antarctic and the Subantarctic, although total chlorophyll a concentrations changed greatly within each water mass. Particularly low concentrations of chlorophyll a were detected in the marginal ice zone. Chlorophyll a contained in 30 μm netplankton made up 5∼60% of total chlorophyll a: large near the marginal ice zone and becoming small with travel towards the north. High percentage shares of netplankton chlorophyll a were confirmed even in low total chlorophyll a concentrations in summer in the Southern Ocean. A positive relation was observed between the percentage of 30 μm netplankton and the “average total chlorophyll a”, although there was great scatter. This revised version was published online in August 2006 with corrections to the Cover Date.     

Electron beam emission from the EXOS-B (JIKIKEN) satellite as a powerful diagnostic tool in the magnetosphere

In an electron beam emission experiment on board the EXOS-B (JIKIKEN) satellite (200 V, 1 mA-maximum), several types of waves are strongly excited by the beam such as plasma frequency, upper hybrid frequency, electron cyclotron frequency, their harmonics and nonlinear coupling of these waves. Measurements of these waves give information on local plasma density and magnetic field strength and it is revealed that the electron beam emission from the spacecraft is a powerful diagnostic tool in the magnetosphere. A long term observation in this electron beam experiment has provided us with the average plasma density profile in the magnetosphere. It is also useful for the detection of the plasmapause. Plasma density measurements down to the order of 10 cm^–3 are possible. The instrument itself is very simple and compact, so that it will be a powerful plasma diagnostic tool in future magnetospheric and planetary explorations.     

Cosmological radiative transfer codes comparison project – I. The static density field tests

Radiative transfer (RT) simulations are now at the forefront of numerical astrophysics. They are becoming crucial for an increasing number of astrophysical and cosmological problems; at the same time their computational cost has come within reach of currently available computational power. Further progress is retarded by the considerable number of different algorithms (including various flavours of ray tracing and moment schemes) developed, which makes the selection of the most suitable technique for a given problem a non-trivial task. Assessing the validity ranges, accuracy and performances of these schemes is the main aim of this paper, for which we have compared 11 independent RT codes on five test problems: (0) basic physics; (1) isothermal H  ii region expansion; (2) H  ii region expansion with evolving temperature; (3) I-front trapping and shadowing by a dense clump and (4) multiple sources in a cosmological density field. The outputs of these tests have been compared and differences analysed. The agreement between the various codes is satisfactory although not perfect. The main source of discrepancy appears to reside in the multifrequency treatment approach, resulting in different thicknesses of the ionized-neutral transition regions and the temperature structure. The present results and tests represent the most complete benchmark available for the development of new codes and improvement of existing ones. To further this aim all test inputs and outputs are made publicly available in digital form.     

Investigation of cutting methods for small samples of Hayabusa and future sample return missions

We report the investigation of cutting methods for Hayabusa samples. The purpose of our study is to explore the possibility of applying multiple analyses to a single particle effectively. We investigated the cutting performance of a blade dicing saw, laser, focused ion beam (FIB), and physical breaking by microindenter. Cutting performance was examined by estimating the aspect ratio of the cut slit, i.e., depth over width of the slit. We also investigated the possible contamination and sample damage by cutting. The result of the investigation shows that we can cut the samples from <50 μm to 500 μm using those methods with aspect ratios from 10 to 20, although they would introduce some contamination or damage to the samples. Our investigations also provide an important basis for the analysis of samples obtained by future sample return missions.     

40Ar/39Ar age of material returned from asteroid 25143 Itokawa

The Hayabusa mission to asteroid 25143, Itokawa, brought back 2000 small particles, which most closely resemble material found in LL4‐6 chondrites. We report an ⁴⁰Ar/³⁹Ar age of 1.3 ± 0.3 Ga for a sample of Itokawa consisting of three grains with a total mass of ~2 μg. This age is lower than the >4.0 Ga ages measured for 75% of LL chondrites but close to one for Y‐790964 and its pairs. The flat ⁴⁰Ar/³⁹Ar release spectrum of the sample suggests complete degassing 1.3 Ga ago. Recent solar heating in Itokawa's current orbit does not appear likely to have reset that age. Solar or impact heating 1.3 Ga ago could have done so. If impact heating was responsible, then the 1.3 Ga age sets an upper bound on the time at which the Itokawa rubble pile was assembled and suggests that rubble pile creation was an ongoing process in the inner solar system for at least the first 3 billion years of solar system history.     

Motion of iron sulfide inclusions inside a shock‐melted chondrule

Abstract— We calculated the trajectories of molten spheres of iron sulfide inclusions inside a melted chondrule during the nebular shock wave heating. Our calculations included the effects of high‐velocity internal flow in the melted chondrule and apparent gravitational force caused by the drag force of nebular gas flow. The calculated results show that large iron sulfide inclusions, which have radii 0.23 times larger than those of the parent chondrules, must reach the surface of the melted chondrule within a short period of time (<<1 s). This effect will provide us with very important information about chondrule formation by nebular shock wave heating.