Inflations prior to Vulcanian eruptions and gas bursts detected by tilt observations at Semeru Volcano,Indonesia

We examine the basic characteristics of inflations at Semeru Volcano, Indonesia, to clarify the pressurization process prior to two different styles of explosive eruptions: Vulcanian eruptions and gas bursts. Analysis of data obtained from tilt meters installed close to the active crater allows clarification of the common features and the differences between the two styles of eruptions. To improve the signal-to-noise ratio and to determine the mean characteristics of the inflations, we stack tilt signals obtained from eruptions of different magnitudes and evaluate the maximum amplitude of the seismic signal associated with these eruptions. Vulcanian eruptions, which explosively release large amounts of ash, are preceded by accelerating inflation about 200–300 s before the eruption, which suggests volume expansion of the gas phase. In contrast, gas bursts, which rapidly effuse water steam accompanied by explosive sounds, follow non-accelerating changes of inflation starting 20 s before each emission. Tilt amplitudes increase with the magnitude of eruptions for both eruption styles. This suggests that the volume and/or pressure of magma or gas stored in the conduit before eruptions controls the magnitude of volcanic eruptions. These results further suggest that the magnitude of eruptions can be predicted from geodetic measurements of volcano inflation.     

Gas hydrate saturation at Site C0002, IODP Expeditions 314 and 315, in the Kumano Basin,Nankai trough

The degree of gas hydrate saturation at Integrated Ocean Drilling Program (IODP) Site C0002 in the Kumano Basin, Nankai Trough, was estimated from logging‐while‐drilling logs and core samples obtained during IODP Expeditions 314 and 315. Sediment porosity data necessary for the calculation of saturation were obtained from both core samples and density logs. Two forms of the Archie equation (‘quick‐look’ and ‘standard’) were used to calculate gas hydrate saturation from two types of electrical resistivity log data (ring resistivity and bit resistivity), and a three‐phase Biot‐type equation was used to calculate gas hydrate saturation from P‐wave velocity log data. The gas hydrate saturation baseline calculated from both resistivity logs ranges from 0% to 35%, and that calculated from the P‐wave velocity log ranges from 0% to 30%. High levels of gas hydrate saturation (>60%) are present as spikes in the ring resistivity log and correspond to the presence of gas hydrate concentrations within sandy layers. At several depths, saturation values obtained from P‐wave velocity data are lower than those obtained from bit resistivity data; this discrepancy is related to the presence of free gas at these depths. Previous research has suggested that gas from deep levels in the Kumano Basin has migrated up‐dip towards the southern and seaward edge of the basin near Site C0002. The high saturation values and presence of free gas at site C0002 suggest that a large gas flux is flowing to the southern and seaward edge of the basin from a deeper and/or more landward part of the Kumano Basin, with the southern edge of the Kumano Basin (the location of site C0002) being the main area of fluid accumulation.     

Relationship between trace elements and depositional environments in shallow sediments: a case study from Southern Kanto Plain,Central Japan

Underground developments such as subways and shopping facilities have been increasing in number and magnitude in the relatively shallow subsurface of many urban areas where the earth materials commonly are composed of marine sediments. Marine sediments can contain significant amounts of toxic trace elements such as arsenic, boron, and lead. Changes in the subsurface environment caused by excavation and construction in underground developments could potentially cause these toxic elements to be dissolved into pore water of the sediments, which might lead to groundwater pollution. The purpose of this study is to investigate correlations among chemical properties of marine sediments, such as pH and electrical conductivity (EC), concentrations of toxic trace elements, and stratigraphic characteristics of the sediments. We selected three sites with different stratigraphic settings in the southern Kanto Plain around the Tokyo Metropolis. We collected core samples from shallow strata at a site in the Arakawa Lowland, southern Saitama, and at two sites in the Musashino Upland, Middle Tokyo. All sites have both marine and non-marine sediments up to 50–60 m in thickness. We determined trace element concentrations in the pore water, pH, EC, and loss on ignition. The results show that (1) the marine sediments tend to have low pH, high EC, and high sulfur concentration compared to the non-marine sediments (2) the concentration of most of the soluble heavy metals vary depending on the concentration of sulfate, the pH, and the formation processes of the strata, (3) the arsenic concentration is not related to sulfur concentration but apparently to Fe and Al concentrations, (4) the boron concentration is not related to any other properties implying that the boron level is independent of and cannot be predicted by common chemical properties, and (5) for all three sites, concentrations of most of the trace elements, EC, pH, and sulfate concentration were correlated with each other. This study shows that the concentration and potential mobilization of many toxic trace elements in marine sediments could be predicted by easily measurable pore water chemical properties such as pH and EC. This could be useful for predicting and avoiding the risk of groundwater pollution during underground development projects.     

An emission pathway for stabilization at 6?Wm?2 radiative forcing

Representative Concentration Pathway 6.0 (RCP6) is a pathway that describes trends in long-term, global emissions of greenhouse gases (GHGs), short-lived species, and land-use/land-cover change leading to a stabilisation of radiative forcing at 6.0 Watts per square meter (Wm^?2) in the year 2100 without exceeding that value in prior years. Simulated with the Asia-Pacific Integrated Model (AIM), GHG emissions of RCP6 peak around 2060 and then decline through the rest of the century. The energy intensity improvement rates changes from 0.9% per year to 1.5% per year around 2060. Emissions are assumed to be reduced cost-effectively in any period through a global market for emissions permits. The exchange of CO₂ between the atmosphere and terrestrial ecosystem through photosynthesis and respiration are estimated with the ecosystem model. The regional emissions, except CO₂ and N₂O, are downscaled to facilitate transfer to climate models.     

Cd adsorption onto Pseudomonas putida in the presence and absence of extracellular polymeric substances

The role of bacterial extracellular polymeric substances (EPS) in metal adsorption was determined by studying Cd adsorption onto the gram-negative bacterial species Pseudomonas putida with and without enzymatic removal of EPS from the biomass material. A range of experimental approaches were used to characterize the Cd adsorption reactions, including bulk proton and Cd adsorption measurements, FTIR spectroscopy, and fluorescence microscopy. The proton-reactivities of the biomass samples with EPS are not significantly different from those obtained for EPS-free biomass. Similarly, the presence of EPS does not significantly affect the extent of Cd removal from solution by the biomass on a mass-normalized basis, based on bulk Cd adsorption measurements conducted as a function of pH, nor does it appear to strongly affect the Cd-binding groups as observed by FTIR. However, fluorescence microscopy indicates that Cd, although concentrated on cell walls, is also bound to some extent to EPS. Together, the results from this study suggest that the P. putida EPS can bind significant concentrations of Cd from solution, and that the nature and mass-normalized extent of the binding is similar to that of the cell wall. Therefore, the EPS-bearing systems do not exhibit enhanced mass-normalized removal of Cd from solution relative to the EPS-free systems. The presence of the EPS effectively increases the viability of cells exposed to aqueous Cd, likely due to sequestration of the Cd away from the cells due to Cd-EPS binding.     

Exsolution textures in orthopyroxene in aluminous granulites as indicators of UHT metamorphism: New evidence from the Eastern Ghats Belt, India

Highly aluminous orthopyroxene, coexisting with sapphirine, cordierite, sillimanite, quartz and garnet in various combinations, constitute granoblastic mosaic peak metamorphic assemblages in aluminous granulites from three localities in the Eastern Ghats Belt, India. Orthopyroxene contains four types of intergrowths: (a) involving sapphirine with or without cordierite, (b) involving spinel, but without sapphirine, (c) involving cordierite, but without sapphirine and spinel, and (d) involving garnet, without sapphirine, spinel or cordierite. On the basis of textural and compositional data, origin of the intergrowths is ascribed to breakdown of Mg-Tschermak component, locally also involving Fe- and Ti-Tschermak. An attempt is made to compute the “pre-breakdown” compositions of orthopyroxene by image analysis, which shows maximum Al₂O₃ content of 13.4 wt.% in the pristine orthopyroxene. Geothermometry, phase equilibria consideration and application of existing experimental data on alumina solubility in orthopyroxene coexisting with sapphirine and quartz, collectively indicate extreme thermal conditions of metamorphism (> 1000 °C) for the studied assemblages. This re-affirms the notion that Al₂O₃ solubility in orthopyroxene is the most powerful indicator of UHT metamorphism (Harley, S.L., 2004. Extending our understanding of ultrahigh temperature crustal metamorphism. J. Mineral. Petrol. Sci. 99, 140–158). The intergrowths are considered to have formed due to cooling from the thermal peak spanning a temperature range of approximately 150 °C. Appearance of diverse types of intergrowths is probably related to subtle differences in bulk composition, particularly Fe:Mg ratios.     

Secular perturbations of fictitious satellites of uranus

Secular perturbations of fictitious satellites that are initially circular and in the equatorial plane of Uranus are discussed. Satellites located in the region where the solar perturbation is dominant become highly eccentric and inclined with respect to the equator, and have a possibility to collide with Uranus. Satellites located in the region where the oblateness perturbation is dominant keep the original eccentricity and the inclination. A scenario of a possible extinction of outer satellites of Uranus is also discussed.     

Effects On the Nutation of the Non-Zonal Harmonics of Third Degree

In this paper, we calculate the coefficients of the nutation for a rigid Earth model due to the C _3m and S _3m (m ≠ 0) harmonics of the geopotential, starting from the Hamiltonian theory as developped by Kinoshita (1977). We show that these coefficients are far from being negligible as given the level of truncation of 0.1 μas which is necessary in the reconstruction of the tables of nutation, and also that their value is very close to that given by Bretagnon et al. (1997). This revised version was published online in July 2006 with corrections to the Cover Date.     

Age of the Solomon Sea Basin from magnetic lineations

Magnetic anomalies measured in the central to western half of the Solomon Sea, when considered with other magnetic data, reveal the existence of linear patterns. Magnetic lineation anomaly models of the Cenozoic, 65 to 0 Ma, suggest that an age between 34 and 28 Ma and a half-rate spreading speed of 5.8 cm/yr for the northern flank of a former spreading center best fits our present magnetic data in the Solomon Sea Basin. Heat flow and bathymetry data support this preferred model.