Shear Strength Behavior of Two Landfill Clay Liners

Direct shear tests were conducted to obtain both the shear strength of compacted clay liners (CCLs) specimens and the interface shear strength between compacted clay liner and base soil. These experiments were conducted under the conditions of five different water contents. The experimental results show that shear strength of both CCLs and CCLs/base interface decreases with the increase in the water content of CCLs and base soil. In addition, the considerate concentration of NaCl in leachate has no deteriorating effect on the shear strength of liners. Triaxial shear tests were also conducted on clay liner specimens to obtain total and effective shear strength under a fast compression. The shear strength c‘=100 kPa for sand-bentonite, respectively. These results indicate that the compacted clay-bentonite shows normal consolidation, but that the compacted sand-bentonite exhibits over-consolidation.     

Petrological study of Nasu-Chausudake Volcano (ca. 16 ka to Present), northeastern Japan

Chausudake Volcano is representative of the active volcanoes in northeastern Japan, and has a record of many historical eruptions. Because its 16-ky eruptive history is well documented, Chausudake is well-suited for examining the temporal change of magma chamber processes and for assessing potential hazards. The activity of the Chausudake Volcano can be divided into six magmatic units (CH1-CH6). Most of its products have similar characteristics, but those from unit CH1 show wider variation. Most rocks are andesite and have plagioclase, clinopyroxene, orthopyroxene, and Fe-Ti oxides as phenocrysts, with or without olivine or quartz. Mafic inclusions, which are observed in most products, are basaltic andesites that have various combinations of the same phenocryst species. Petrographic features observed in host rocks and mafic inclusions, such as disequilibrium phenocrysts and resorbed textures, suggest magma mixing/co-mingling. Whole rock compositions of both host rocks and mafic inclusions show linear trends in variation diagrams, which suggest that the rocks are derived from the mixing/co-mingling between mafic and felsic end members. Bulk silica content of the mafic end-member magma is estimated to be ca. 52%, and contains Mg-rich olivine and An-rich plagioclase. The temperature of this end member is estimated to have been higher than 1,100 °C. Bulk silica content of the felsic end-member magma is estimated to be ~66%, and contains Mg-poor pyroxenes, An-poor plagioclase, and quartz phenocrysts, with a temperature of between 800 and 900 °C. Trace element compositions show that the end members have different origins, but have changed little over the entire 16-ky of activity. The mafic end-member magmas might come from a lower-crustal homogeneous, large magma chamber, whereas the felsic end-member magmas may be partial melts of crustal materials produced by the heat of the mafic end member. Felsic end-member magma may have accumulated in the middle crust before CH1 activity. The mixing ratio of the felsic to mafic end members was 0.5:0.5 to 0.4:0.6 for the CH1 unit, and ca. 0.4:0.6 for the other units. Considering that ca. 75% of the total volume of the eruptive products form the first unit, its wider compositional variation is attributed to more heterogeneous mixing ratios.     

Multi-scale solution for building extraction from LiDAR and image data

This paper presents a multi-scale solution based on mathematical morphology for extracting the building features from remotely sensed elevation and spectral data. Elevation data are used as the primary data to delineate the structural information and are firstly represented on a morphological scale-space. The behaviors of elevation clusters across the scale-space are the cues for feature extraction. As a result, a complex structure can be extracted as a multi-part object in which each part is represented on a scale depending on its size. The building footprint is represented by the boundary of the largest part. Other object attributes include the area, height or number of stories. The spectral data is used as an additional source to remove vegetation and possibly classify the building roof material. Finally, the results can be stored in a multi-scale database introduced in this paper. The proposed solution is demonstrated using the data derived from a Light Detection And Ranging (LiDAR) surveying flight over Tokyo, Japan. The results show a reasonable match with reference data and prove the capability of the proposed approach in accommodation of diverse building shapes. Higher density LiDAR is expected to produce better accuracy in extraction, and more spectral sources are necessary for further classification of building roof material. It is also recommended that parallel processing should be implemented to reduce the computation time.     

Geology of the Gorny Altai subduction–accretion complex, southern Siberia: Tectonic evolution of an Ediacaran–Cambrian intra-oceanic arc-trench system

The Gorny Altai region in southern Siberia is one of the key areas in reconstructing the tectonic evolution of the western segment of the Central Asian Orogenic Belt (CAOB). This region features various orogenic elements of Late Neoproterozoic–Early Paleozoic age, such as an accretionary complex (AC), high-P/T metamorphic (HP) rocks, and ophiolite (OP), all formed by ancient subduction–accretion processes. This study investigated the detailed geology of the Upper Neoproterozoic to Lower Paleozoic rocks in a traverse between Gorno-Altaisk city and Lake Teletskoy in the northern part of the region, and in the Kurai to Chagan-Uzun area in the southern part. The tectonic units of the studied areas consist of (1) the Ediacaran (=Vendian)–Early Cambrian AC, (2) ca. 630 Ma HP complex, (3) the Ediacaran–Early Cambrian OP complex, (4) the Cryogenian–Cambrian island arc complex, and (5) the Middle Paleozoic fore-arc sedimentary rocks. The AC consists mostly of paleo-atoll limestone and underlying oceanic island basalt with minor amount of chert and serpentinite. The basaltic lavas show petrochemistry similar to modern oceanic plateau basalt. The 630 Ma HP complex records a maximum peak metamorphism at 660 °C and 2.0 GPa that corresponds to 60 km-deep burial in a subduction zone, and exhumation at ca. 570 Ma. The Cryogenian island arc complex includes boninitic rocks that suggest an incipient stage of arc development. The Upper Neoproterozoic–Lower Paleozoic complexes in the Gorno-Altaisk city to Lake Teletskoy and the Kurai to Chagan-Uzun areas are totally involved in a subhorizontal piled-nappe structure, and overprinted by Late Paleozoic strike-slip faulting. The HP complex occurs as a nappe tectonically sandwiched between the non- to weakly metamorphosed AC and the OP complex. These lithologic assemblages and geologic structure newly documented in the Gorny Altai region are essentially similar to those of the circum-Pacific (Miyashiro-type) orogenic belts, such as the Japan Islands in East Asia and the Cordillera in western North America. The Cryogenian boninite-bearing arc volcanism indicates that the initial stage of arc development occurred in a transient setting from a transform zone to an incipient subduction zone. The less abundant of terrigenous clastics from mature continental crust and thick deep-sea chert in the Ediacaran–Early Cambrian AC may suggest that the southern Gorny Altai region evolved in an intra-oceanic arc-trench setting like the modern Mariana arc, rather than along the continental arc of a major continental margin. Based on geological, petrochemical, and geochronological data, we synthesize the Late Neoproterozoic to Early Paleozoic tectonic history of the Gorny Altai region in the western CAOB.     

Sunyaev–Zel'dovich distortion from early galactic winds

We consider the distortion in the cosmic microwave background (CMB) resulting from galactic winds at high redshift. Winds outflowing from galaxies have been hypothesized to be possible sources of metals in the intergalactic medium, which is known to have been enriched to 10^−2.5 Z_⊙ at z ∼3. We model these winds as functions of mass of the parent galaxy and redshift, assuming that they activate at a common initial redshift, z _in, and calculate the mean y -distortion and the angular power spectrum of the distortion in the CMB. We find that the thermal Sunyaev–Zel'dovich (SZ) effect resulting from the winds is consistent with previous estimates. The distortion arising from the kinetic SZ (kSZ) effect is, however, found to be more important than the thermal SZ (tSZ) effect. We find that the distortion resulting from galactic winds is an important contribution to the power spectrum of distortion at very small angular scales ( l ∼10⁴). We also find that the power spectrum resulting from clustering dominates the Poisson power spectrum for l ≤(4–5)×10⁵. We show explicitly how the combined power spectrum from wind dominates over that of clusters at 217 GHz, relevant for PLANCK . We also show how these constraints change when the efficiency of the winds is varied.     

Observations of C2 Molecules in the Coma of Comets at Mitaka

In order to monitor the various phenomena of comets, we continuously made the near-nucleus imaging observations of comets at National Astronomical Observatory, Mitaka. Here we report on the results of the observations of two spectacular comets. One is the analysis of photometry of C₂ emission images in the coma of comet Hyakutake (C/1996 B2). By comparing the production rates of C₂ radicals with C₂H₂ molecules, we conclude that the most C₂ radicals were originated from C₂H₂, while some of them might be produced from other parents. The second item is the analysis of the morphology of C₂ emission images in the coma of comet Hale-Bopp(C/1995 O1). By applying a ring masking technique, we detected asymmetrical distribution of the C₂ molecules. The results of these two comets might suggest that a portion of C₂ radicals were formed by the disintegration of the small organic dust grains, like the so-called CHON particles. This revised version was published online in July 2006 with corrections to the Cover Date.     

Storm-time characteristics of low-latitude whistlers

Using the results from special observations, the storm-time effects on whistler characteristics at low latitudes were examined and found to agree with previous statistical studies. A short discussion is made on the link between spread-F irregularities and magnetospheric whistler ducts. The enhanced whistler activity is explained as a consequence of the stable whistler duct region during spread-F conditions.     

Estimation of nearshore groundwater discharge and its potential effects on a fringing coral reef

Radon (²²²Rn) measurements were conducted in Shiraho Reef (Okinawa, Japan) to investigate nearshore submarine groundwater discharge (SGD_nearshore) dynamics. Estimated average groundwater flux was 2-3 cm/h (maximum 7-8 cm/h). End-member radon concentration and gas transfer coefficient were identified as major factors influencing flux estimation accuracy. For the 7-km long reef, SGD_nearshore was 0.39-0.58 m³/s, less than 30% of Todoroki River’s baseflow discharge. SGD_nearshore was spatially and temporally variable, reflecting the strong influence of subsurface geology, tidal pumping, groundwater recharge, and hydraulic gradient. SGD_nearshore elevated nearshore nitrate concentrations (0.8-2.2 mg/l) to half of Todoroki River’s baseflow -N (2-4 mg/L). This increased nearshore Chl-a from 0.5-2 μg/l compared to the typically low Chl-a (<0.1-0.4 μg/l) in the moat. Diatoms and cyanobacteria concentrations exhibited an increasing trend. However, the percentage contributions of diatoms and cyanobacteria significantly decreased and increased, respectively. SGD may significantly induce the proliferation of cyanobacteria in nearshore reef areas.