He+ ion implantation and electron irradiation effects on cathodoluminescence of plagioclase

Cathodoluminescence (CL) spectra of unirradiated, He⁺ ion-implanted and electron-irradiated plagioclase minerals contain the following emission bands: (1) below 300 nm due to Pb²⁺, (2) at ~320 and ~350 nm to Ce³⁺, (3) at 380–420 nm to Eu²⁺, Ti⁴⁺ and/or Al–O^?–Al/Ti defects, (4) at 560–580 nm to Mn²⁺ and (5) at 720–760 nm to Fe³⁺. During the implantation of He⁺ ion, much of their energy may be dissipated by partial destruction and strain of the feldspar framework, resulting in quenching of CL. Deconvolution of CL spectra acquired from albite and oligoclase reveals an emission component at 1.86 eV (666 nm) assigned to a radiation-induced defect center associated with Na⁺ atoms. As its intensity increases with radiation dose, this emission component has potential for geodosimetry and geochronometry. Electron irradiation causes Na⁺ migration in plagioclase, and then a considerable reduction in intensity of emissions assigned to impurity centers, which is responsible for an alteration in the energy state or a decrease in luminescence efficiency following the change of activation energy. Emission intensity at 1.86 eV positively correlates with electron irradiation time for unimplanted and He⁺ ion-implanted albite and oligoclase, but negatively for the implanted albite above 1.07 × 10^?4 C/cm². It implies that radiation halo produced by α-particles should not be measured using CL spectroscopy to estimate β radiation dose on albite in the high radiation level.     

Rock pillars shaped by columnar joints in granite at Mt. Mizugaki,Central Japan

Rock pillars of granite form a special type of characteristic topography in granite, but their origin is not well understood, partly because their 3D morphology has never been well characterized. Rock pillars were investigated at Mt. Mizugaki, which is underlain by Neogene granite that intruded into the Cretaceous accretionary complex in central Japan. Three rock pillars and their surrounding areas were investigated in detail using unmanned aerial vehicle (UAV) images and structure from motion (SfM). The rock pillars were up to 70 m high and were shaped by columnar joints, which has hardly been reported before in granitic rocks. Columnar joints in granite are much larger than columnar joints in volcanic rocks. The columnar joints curved vertically, and some of them showed dipyramid shapes. The large size and curved morphology of the columnar joints may be the result of the slow cooling of the granite, compared to that of volcanic rocks. Thus, the columnar joints at Mt. Mizugaki made large, high rock pillars, which are not common in volcanic rocks.     

Landslide Amplification by Liquefaction of Runout‐Path Material after the 2008 Wenchuan (M 8·0) Earthquake,China

Here, we propose that an earthquake can trigger the failure of a landslide mass while simultaneously triggering liquefaction of runout‐path materials before the arrival of the landslide mass, thus greatly increasing the size and mobility of an overriding landslide. During the 2008 Wenchuan earthquake, about 60 000 landslides were triggered, directly resulting in about 20 000 casualties. While these landslides mainly originated from steep slopes, some landslides with high mobility formed in colluvial valley deposits. Among these, the most catastrophic was the Xiejiadian landslide in Pengzhou city, which traveled hundreds of meters before coming to rest. Through field investigation and laboratory testing, we conclude that this landslide primarily formed from colluvial deposits in the valley and secondarily from failure of slopes in granitic rock located uphill. Much of the granitic slope failure was deposited in the upper part of the travel path (near the slide head); the remainder was dispersed throughout the main landslide deposit. Superposition of deposits at the landslide toe indicates that landslide debris derived from colluvial soil was deposited first. The deposits at the landslide toe displayed flow characteristics, such as fine materials comprising basal layers and large boulders covering the deposit surface. We hypothesize that the main part of the landslide resulted from seismogenic liquefaction of valley colluvium, rather than from liquefaction potentially caused by undrained loading from the granitic slope failures impacting the colluvium. To examine the likelihood that seismogenic liquefaction occurred, we took samples from different areas of the landslide deposit and performed undrained cyclic shear tests on them in the laboratory. The results showed that the sandy soils that comprise most of the deposit are highly liquefiable under seismic loading. Therefore, we conclude that liquefaction of the colluvium in the valley during the earthquake was the main reason for this rapid (~46 m/s) long‐runout (1·7 km) landslide. Copyright © 2012 John Wiley & Sons, Ltd.     

Spatial and temporal distributions of stable isotopes in precipitation over Thailand

Spatial and temporal variations of the isotopic composition of precipitation over Thailand were investigated. The local meteoric water line for Thailand deviates slightly from the global meteoric water line, with lower slopes (7.62 ± 0.07, 7.59 ± 0.08) and intercepts (6.42 ± 0.39, 6.22 ± 0.42) using ordinary and precipitation weighted methods. Differences in spatial and temporal δ¹⁸O distributions between the tropical monsoon and tropical savanna climate zones were found due to differing moisture source contributions and seasonal precipitation patterns. The temporal data reveals that the northeast monsoon rains originate from isotopically-enriched local moisture with isotope values of −9.36 to −0.09‰ (mean − 3.73 ± 0.42‰), whereas the southwest monsoon clouds had a more significant rainout effect from Rayleigh distillation, with isotope values of −9.56 to −1.78‰ (mean − 5.40 ± 0.38‰). The precipitation amount at each site was negatively correlated with δ¹⁸O (−0.24 to −3.20‰ per 100 mm, R² = 0.1–0.9). Furthermore, δ¹⁸O was negatively correlated with geography (latitude, altitude) for the southwest monsoon periods, as expected based on other observed correlations. However, an inverse correlation was seen in the northeast monsoon due to differing moisture transportation as part of the continental effect. The correlation coefficient (R) was higher in the southwest monsoon (−0.84 for latitude effect, −0.64 for altitude effect) than the northeast monsoon (0.67 for latitude effect, 0.35 for altitude effect). The spatial pattern of isotopic composition reflects the southwest monsoon more clearly than the northeast monsoon, but the two monsoons also have a cancelling impact on orographic patterns. An agreement of the δ¹⁸O and deuterium excess (d-excess) was a negative correlation and found to reflect precipitation sources and re-evaporation processes. The d-excess was slightly higher for the northeast monsoon, bringing moisture from the Pacific Ocean and travelling across the continent before reaching the observed stations. By contrast, the d-excess was relatively lower for the Indian Ocean's moisture in the southwest monsoon.     

Effect of heavy oil on the development of the nervous system of floating and sinking teleost eggs

Heavy oil (HO) on the sea surface penetrates into fish eggs and prevents the normal morphogenesis. To identify the toxicological effects of HO in the context of the egg types, we performed exposure experiments using floating eggs and sinking eggs. In the course of development, HO-exposed embryos of floating eggs showed abnormal morphology, whereas early larva of the sinking eggs had almost normal morphology. However, the developing peripheral nervous system of sinking eggs showed abnormal projections. These findings suggest that HO exposed fishes have problems in the developing neurons, although they have no morphological malformations. Through these observations, we conclude that HO is strongly toxic to floating eggs in the morphogenesis, and also affect the neuron development in both floating and sinking eggs.     

Application of an earthquake early warning system and a real-time strong motion monitoring system in emergency response in a high-rise building

We apply a combination of earthquake early warning system (EEWS) and real-time strong motion monitoring system (RSMS) to emergency response for a high-rise building; The Kogakuin University has a 29-story high-rise building in Shinjuku Ward, Tokyo. The proposed strategy is based on the Plan, Do, Check, Action (PDCA) Cycle to brush up the systems and the users: in the “Plan” stage, we apply EEWS and RSMS to the building, where EEWS predicts not only short-period strong ground motions but also long-period ground motions [1]. The system is built into a building announcement system, an emergency elevator control system, and an email message system, which quickly send emails to the emergency response team. Meanwhile, RSMS provides information on seismic intensities at each floor of the building via the web browser in real time using the existing network in the building. In addition, the building response and structural damage can be estimated based on this information. The network system is impervious to the earthquake damage, because the network cable has extra length, there is, however, possible that a network system does not work due to power outage. Thus, we develop the network system that has uninterruptible power-supply system (UPS) and apply it to EEWS and RSMS. The high-rise building has the emergency call units to the security control center in the building on every floor. The emergency call line, however, will be busy promptly, because it is able to use only one line. Therefore, we installed IP telephone which uses the network system on main floors. UPS will work about 30 min after a major earthquake, it is supposed to be enough time for gathering the damage information about the building during initial response. In the “Do” stage, we prepare emergency response instruction manuals and educate the faculty members and students to carry out promptly emergency response. In the “Check” stage, the validity of the proposed systems are verified by carrying out an earthquake drill in an actual high-rise building. The earthquake drill confirmed that our proposed approach is valid. In the final “Action” stage, we improve these systems and emergency response manual and educate people in the building how to use effectively these systems.     

A stabilization procedure for soil-water coupled problems using the element-free Galerkin method

The development of stability problems related to classical mixed methods has recently been observed. In this study, a soil-water coupled boundary-value problem, one type of stability problem, is presented using the element-free Galerkin method (EFG method). In this soil-water coupled problem, anomalous behavior appears in the pressure field unless a stabilization technique is used. The remedy to such numerical instability has generally been to adopt a higher interpolation order for the displacements than for the pore pressure. As an alternative, however, an added stabilization term is incorporated into the equilibrium equation. The advantages of this stabilization procedure are as follows: (1) The interpolation order for the pore pressure is the same as that for the displacements. Therefore, the interpolation functions in the pore pressure field do not reduce the accuracy of the numerical results. (2) The stabilization term consists of first derivatives. The first derivatives of the interpolation functions for the EFG Method are smooth, and therefore, the solutions for pore pressure are accurate. In order to validate the above stabilization technique, some numerical results are given. It can be seen from the results that a good convergence is obtained with this stabilization term.     

Reliability and importance of structural diversity of climate model ensembles

We investigate the performance of the newest generation multi-model ensemble (MME) from the Coupled Model Intercomparison Project (CMIP5). We compare the ensemble to the previous generation models (CMIP3) as well as several single model ensembles (SMEs), which are constructed by varying components of single models. These SMEs range from ensembles where parameter uncertainties are sampled (perturbed physics ensembles) through to an ensemble where a number of the physical schemes are switched (multi-physics ensemble). We focus on assessing reliability against present-day climatology with rank histograms, but also investigate the effective degrees of freedom (EDoF) of the fields of variables which makes the statistical test of reliability more rigorous, and consider the distances between the observation and ensemble members. We find that the features of the CMIP5 rank histograms, of general reliability on broad scales, are consistent with those of CMIP3, suggesting a similar level of performance for present-day climatology. The spread of MMEs tends towards being “over-dispersed” rather than “under-dispersed”. In general, the SMEs examined tend towards insufficient dispersion and the rank histogram analysis identifies them as being statistically distinguishable from many of the observations. The EDoFs of the MMEs are generally greater than those of SMEs, suggesting that structural changes lead to a characteristically richer range of model behaviours than is obtained with parametric/physical-scheme-switching ensembles. For distance measures, the observations and models ensemble members are similarly spaced from each other for MMEs, whereas for the SMEs, the observations are generally well outside the ensemble. We suggest that multi-model ensembles should represent an important component of uncertainty analysis.     

Tropospheric adjustment to increasing CO2: its timescale and the role of land–sea contrast

Physical processes responsible for tropospheric adjustment to increasing carbon dioxide concentration are investigated using abrupt CO₂ quadrupling experiments of a general circulation model (GCM) called the model for interdisciplinary research on climate version 5 with several configurations including a coupled atmosphere–ocean GCM, atmospheric GCM, and aqua-planet model. A similar experiment was performed in weather forecast mode to explore timescales of the tropospheric adjustment. We found that the shortwave component of the cloud radiative effect (SWcld) reaches its equilibrium within 2 days of the abrupt CO₂ increase. The change in SWcld is positive, associated with reduced clouds in the lower troposphere due to warming and drying by instantaneous radiative forcing. A reduction in surface turbulent heat fluxes and increase of the near-surface stability result in shoaling of the marine boundary layer, which shifts the cloud layer downward. These changes are common to all experiments regardless of model configuration, indicating that the cloud adjustment is primarily independent of air–sea coupling and land–sea thermal contrast. The role of land in cloud adjustment is further examined by a series of idealized aqua-planet experiments, with a rectangular continent of varying width. Land surface warming from quadrupled CO₂ induces anomalous upward motion, which increases high cloud and associated negative SWcld over land. The geographic distribution of continents regulates the spatial pattern of the cloud adjustment. A larger continent produces more negative SWcld, which partly compensates for a positive SWcld over the ocean. The land-induced negative adjustment is a factor but not necessary requirement for the tropospheric adjustment.