ENERGY BALANCE IN 40－50 DAY PERIODIC OSCILLATION OVER THE ASIAN SUMMER MONSOON REGION DURING THE 1979 SUMMER

Based on calculations of data from FGGE Level III b, a discussion is made of the energy balance in the 40－50 day periodic oscillation over the Asian monsoon region during the 1979 summer. It is found that the main source of 40－50 day periodic perturbation is the monsoon region extending from central South Asia to Southeast Asia. In the upper layer over the North Pacific subtropical area (10－20oN, 150oE－150oW) pres-sure work turns into kinetic energy that maintains 40－50 day periodic perturbation associated with the variation in position and intensity of the mid-Pacific trough. The mean energy budget in the three-dimensional space (0－30oE, 30oE－150oW, 100－1000 hPa) indicates that the 40－50 day periodic perturbation transports kinetic energy to a seasonal mean and a transient perturbation wind field.     

Steel slit shear walls with double‐tapered links capable of condition assessment

The concept of using a hysteretic damper as a condition assessment device that functions immediately after a damaging earthquake is realized by making use of the residual out‐of‐plane deformation of links that are arranged in slit shear walls. According to the proposed inspection procedure, the maximum drift ratio experienced by the slit wall is estimated based on the number of torsionally deformed links whose dimensions are determined so that the links would exhibit notable torsional deformation at the target deformations. The adoption of a double‐tapered shape for the links enables us to significantly increase the amount of out‐of‐plane deformation. The relationship between the dimensions and the torsional deformation of the links is established using numerical simulations. The effectiveness of the proposed condition assessment scenario is verified by using a series of cyclic loading tests for individual links and groups of links. As a hysteretic damper, the strength and stiffness of the links predicted by design equations matched well with test results. Copyright © 2014 John Wiley & Sons, Ltd.     

Laboratory measurements of ‘porosity‐free’ intrinsic Vp and Vs in an olivine gabbro of the Oman ophiolite: Implication for interpretation of the seismic structure of lower oceanic crust

In order to determine ‘porosity‐free’ intrinsic ultrasonic compressional (Vp) and shear wave (Vs) velocities and Vp/Vs of an olivine gabbro from the Oman ophiolite, we developed a new experimental system using a piston‐cylinder type high‐pressure apparatus. The new system allowed us to measure velocities at pressures ranging from 0.20 to 1.00 GPa and at temperatures up to 300°C for Vp and 400°C for Vs. At room temperature, the Vp and Vp/Vs increase rapidly with pressure up to 0.40 GPa, while between 0.45 and 1.00 GPa the increase is more gradual. The change in increasing rate is attributed to closure of porosity at pressures above 0.45 GPa. Based on the linear regression of data obtained at higher pressures (0.45–1.00 GPa) and extrapolation to the lower pressures, combined with temperature derivatives of velocities of the sample measured at 1.00 GPa, we determined the intrinsic Vp and Vs of the sample as a function of pressure (P, in GPa) and temperature (T, in °C). The intrinsic velocities can be expressed as Vp (km/s) = 7.004 + 0.096 × P ? 0.00015 × T, and Vs (km/s) = 3.827 + 0.007 × P ? 0.00008 × T. We evaluated the intrinsic Vp and Vs of the olivine gabbro at oceanic crustal conditions and compared them with a velocity depth‐profile of the borehole seismic observatory WP‐2 area in the northwestern Pacific Basin. Although the intrinsic Vp (～7.0 km/s) and Vs (～3.8 km/s) for the olivine gabbro studied are comparable to those of seismic layer 3 in the WP‐2 area, the estimated vertical gradients of intrinsic velocities are significantly smaller than those reported from layer 3. These results suggest that velocity profiles of layer 3 in the WP‐2 area may reflect the presence of a minor porosity in lower oceanic crust, which closes with increasing depth and/or continuous changes in mineralogy of layer 3 rocks.     

Graphitization of carbonaceous matter during metamorphism with references to carbonate and pelitic rocks of contact and regional metamorphisms,Japan

This study is an attempt to correlate the graphitization process of carbonaceous matter during metamorphism with metamorphic grade. Graphitization can be parameterized using crystal structure and chemical and isotopic compositions. The extent of graphitization could be characterized mainly by temperature, duration of metamorphism and rock composition. We compared the graphitization trends for two metamorphic terrains, a contact aureole of the Kasuga area and a regional metamorphic terrain of high-temperature/low pressure type of the Ryoke metamorphic terrain in Northern Kiso area, Central Japan, and for two different lithologies (carbonate and pelite), using X-ray diffractogram, DTA-TG analysis, and chemical and stable isotope analyses. During contact metamorphism, graphitization and carbon isotopic exchange reactions proceeded simultaneously in pelitic and carbonate rocks. The decreases in basal spacing d(002) of the carbonaceous matter in carbonate rocks is greatly accelerated at temperatures higher than about 400° C. Furthermore, carbon isotopic ratios of graphite in carbonate rocks also change to ¹³C-enriched values implying exchange with carbonates. The beginning of this enrichment of ¹³C in the carbonaceous matter coincides with an abrupt increase of the graphitization processes. Carbon isotopic shifting up to 5 in pelites could be observed as metamorphic temperature increased probably by about 400° C. Carbonaceous matter in pelitic rocks is sometimes a mixture of poorly crystallized organic matter and well-crystallized graphite detritus. DTA-TG analysis is an effective tool for the distinction of detrital graphitic material. Two sources for the original carbon isotopic composition of carbonaceous matter in pelites in the Kasuga contact aureole can be distinguished, about-28 and-24 regardless of the presence of detrital graphite, and were mainly controlled by depositional environment of the sediments. Graphitization in limestones and pelitic rocks in regional metamorphism proceeds further than in a contact aureole. In the low-temperature range, the differences in extent of graphitization between the two metamorphic regions is large. However, at temperatures higher than 600° C, the extent of graphitization in both regions is indistinguishable. The degree of graphitization is different in limestones and pelitic rocks from the Ryoke metamorphic terrain. We demonstrate that the graphitization involves a progressive re-construction process of the crystal structure. The sequence of the first appearance of crystal inter planar spacing correlates with the metamorphic grade and indicates the crystal growth of three-dimensional structured graphite.     

Resistivity mapping using the VLF-MT method around surface fault ruptures of the 1995 Hyogo-ken Nanbu earthquake, Japan

Abstract Distinctive fault ruptures, the Nojima Fault and Ogura Fault, appeared along the northwestern coast of Awaji Island at the time of the 1995 Hyogo-ken Nanbu earthquake (Kobe earthquake). In order to delineate the shallow resistivity structures around the faults just after they formed, Very Low Frequency Magnetotelluric (VLF-MT) surveys were made at five sites along the Nojima Fault and at one site along the Ogura Fault. Fourteen transects were made at the one site on the Ogura Fault, and another transect covers the area between the two faults. Changes in apparent resistivity or phase, or both, commonly occur when crossing the surface location of one of the faults, except for the northern transects at OGR-0 on the Ogura Fault. Apparent resistivity values of less than 100 Ωm were observed for Tertiary and Quaternary sediments and values larger than 200 Ωm for granitic rocks. The resistivity structures are related to the morphological characteristics of the fault ruptures. Remarkably conductive zones (less than 10 Ωm in apparent resistivity and 30–40 m in width) were found where the surface displacement is distinct and prominent along a single fault plane. If remarkably conductive zones were formed at the time of the 1995 Hyogo-ken Nanbu earthquake, the results provide a good constraint on the dimensions of a conductive zone near the surface that was made by one earthquake. Alternatively, if characteristic resistivity structures existed prior to the earthquake, the conductive zone was probably formed by some tens of earthquakes in relatively modern times. In this case, this phenomenon is inferred to be a concentration of fracturing in a narrow zone and is associated with the formation of clay minerals, which enhance rock conductivity.     

Change in habitat selection by Japanese macaques (Macaca fuscata) and habitat fragmentation analysis using temporal remotely sensed data in Niigata Prefecture,Japan

The aim of this study was to evaluate changes in macaque habitat selection during a 29-year period. We focused on the 1970s, when little crop damage was caused by Japanese macaques (Macaca fuscata), and the 2000s, when the damage became remarkable. Landsat/MSS from 1978 and ALOS/AVNIR-2 from 2007 were employed for land-cover mapping. For the 2007 land-cover classification, we applied an object-oriented image classification and a classification and regression tree. The Kappa coefficient of the 2007 land-cover map was 0.89. For the 1978 land-cover classification, change detection using principal component analysis and object-oriented image classification were applied to reduce resolution difference errors. The Kappa coefficient of the 1978 land-cover map was 0.84. We applied a Random Forest model for machine learning and data mining to predict the habitat selection of macaques. Several important environmental factors were identified for macaque habitat selection: the ratio of coniferous forest to farmland, distance to farmland, and maximum snow depth. The Random Forest model was extrapolated to the 1978 land-cover map. Over the 29-year period, coniferous forest changed to broad-leaved forest and/or mixed forest within the macaque habitat area. Coniferous forests were not selected as food resources by Japanese macaques. Furthermore, large-scale patches of farmland were used as food resources over the 29-year period. These changes indicated that habitat selection by Japanese macaques changed over the study period. The results show that the home range of macaques expanded, and macaques may now be distributed over a wider area as a result of changes in landscape configuration. Thus, forest planning, such as sustainable management of artificial conifer forests, is important for reducing crop damage.     

Heavy oil exposure induces high moralities in virus carrier Japanese flounder Paralichthys olivaceus

The relationship between chemical exposure and disease outbreak in fish has not been fully defined due to the limitations of experimental systems (model fish and pathogens). Therefore, we constructed a system using the Japanese flounder, Paralichthys olivaceus, and viral haemorrhagic septicemia virus (VHSV), and evaluated it by heavy oil (HO) exposure. The fish were exposed to HO at 0.3, 0.03, 0.003, and 0 g/L following VHSV infection at doses of 10(2.5) or 10(3.5) tissue culture infectious dose (TCID)50/fish. As a result, groups given the dual stressors showed more than 90% mortality. Although VHSV infection at 10(2.5) and 10(3.5) TCID50/fish without HO exposure also induced high mortality, at 68.8% and 81.3%, respectively, HO exposure induced faster and higher mortality in the virus carrier fish, indicating that chemical stressors raise the risk of disease outbreak in fish. The experimental system established in this study could be useful for chemical risk assessment.     

Solute distribution in porous rhyolite as evaluated by sequential centrifugation

Pore water in a porous rhyolite, having a porosity of 27% and pore radii ranging from >25 μm to 0.008 μm, was centrifugally extracted stepwise with increasing centrifugal speed to examine the potential variations of the compositions of pore water and their relationships to reaction and transport occurring in the rock. The rock was soaked for from 1 h to 7 days in an aqueous solution prior to centrifugation. To evaluate the effect of adsorption under minimum effect of dissolution, Li⁺ and Br⁻ were added to the solution as tracer ions. As centrifugal speed increased, water was extracted in order of large to small pores and the thickness of residual water film became thinner. The concentrations of ions dissolving from the rock (Na⁺, K⁺, Ca²⁺, etc.) after 7 days of immersion were relatively constant in pores of 1-10 μm radii and exponentially increased by 3-100 fold with decreasing pore radius to 0.1 μm. These ions are dissolved from the rock and transported toward the exterior of the rock by diffusion. The calculation using a reactive-transport equation showed that the observed concentration changes reflect the change in solute distribution profile with pore size. The concentration of Si after 7 days of immersion was approximately constant or slightly decreased with increasing centrifugal speed, which appears to be controlled by the solubility. The concentration of Li⁺ decreased with increasing centrifugal speed after 1 h of immersion but the trend changed after 7 days of reaction. Initial behavior of Li⁺ is explained by adsorption on pore walls, and the change of trend is explained by desorption of that previously adsorbed, slight amounts of dissolution, and inflow from the outside of the rock. The change in concentration of Br⁻ with increasing centrifugal speed was small, probably because Br⁻ was not adsorbed on the surfaces. The sequential centrifugation thus provides information on the solute distribution associated with reaction and transport occurring in rock pores.     

Sound velocities of Na0.4Mg0.6Al1.6Si0.4O4 NAL and CF phases to 73 GPa determined by Brillouin scattering method

The sound velocities of two aluminum-rich phases in the lower mantle, hexagonal new Al-rich phase (NAL) and its corresponding high-pressure polymorph orthorhombic Ca-ferrite-type phase (CF), were determined with the Brillouin scattering method in a pressure range from 9 to 73 GPa at room temperature. Both NAL and CF samples have identical chemical composition of Na_0.4Mg_0.6Al_1.6Si_0.4O₄ (40 % NaAlSiO₄–60 % MgAl₂O₄). Infrared laser annealing in the diamond anvil cell was performed to minimize the stress state of the sample and obtain the high-quality Brillouin spectra. The results show shear modulus at zero pressure G ₀ = 121.960 ± 0.087 GPa and its pressure derivative G’ = 1.961 ± 0.009 for the NAL phase, and G ₀ = 129.653 ± 0.059 GPa and G’ = 2.340 ± 0.004 for the CF phase. The zero-pressure shear velocities of the NAL and CF phases are obtained to be 5.601 ± 0.005 km/sec and 5.741 ± 0.001 km/sec, respectively. We also found that shear velocity increases by 2.5 % upon phase transition from NAL to CF at around 40 GPa.