Structure and Evolution of the East Antarctic Lithosphere: Tectonic Implications for the Development and Dispersal of Gondwana

Lithospheric evolution of the Antarctic shield is one of the keystones for understanding continental growth during the Earth's evolution. Architecture of the East Antarctic craton is characterized by comparison with deep structures of the other Precambrian terrains. In this paper, we review the subsurface structure of the Lower Paleozoic metamorphic complex around the Lützow-Holm area (LHC), East Antarctica, where high-grade metamorphism occurred during the Pan-African orogenic event. LHC is considered to be one of the collision zones in the last stage of the formation of Gondwana. A geoscience program named ‘Structure and Evolution of the East Antarctic Lithosphere (SEAL)’ was carried out since 1996-1997 austral summer season as part of the Japanese Antarctic Research Expedition (JARE). Several geological and geophysical surveys were conducted including a deep seismic refraction/wide-angle reflection survey in the LHC. The main target of the SEAL seismic transect was to obtain lithospheric structure over several geological terrains from the western adjacent Achaean Napier Complex to the eastern Lower Paleozoic Yamato-Belgica Complex. The SEAL program is part of a larger deep seismic profile, LEGENDS (Lithospheric Evolution of Gondwana East iNterdisciplinary Deep Surveys) that will extend across the Pan-African belt in neighboring fragments of Gondwana.     

Seismic stratigraphy and structural characteristics of back-arc rifts on the Izu-Ogasawara Arc

Abstract Seven back-arc rifts are recognized in the Izu-Ogasawara Arc, namely, the Hachijo, the Aogashima, the Myojin, the Sumisu, the Torishima, the Sofu and the Nishinoshima Rifts from north to south. The acoustic stratigraphy is divided into three units (Units A, B and C) based on the seismic reflection profiles crossing the rifts. The structure of the rifts systematically changes from a half-graben type to a full graben type in the back-arc rifts from the Hachijo Rift to the Torishima Rift. The Hachijo and the Aogashima Rifts have a structure of half-graben, and the Myojin Rift has both structural characteristics of a half-graben and a full graben. The Sumisu and the Torishima Rifts are an asymmetric full graben. The Sofu and the Nishinoshima Rifts have different structural characteristics from the remaining rifts, from the Hachijo Rift to the Torishima Rift. The boundary faults in the back-arc rifts from the Hachijo to the Torishima Rifts cut to Unit B. Unit B correlates with volcaniclastic sediments during pre-rift volcanism between 4 and 2 Ma. The pre-rift volcanism was probably widespread on the northern Izu-Ogasawara Arc as is the present arc volcanism. These factors suggest that the beginning of rifting is dated at some time after 2 Ma. The developing process of the rift consists of three stages; (i) a sag stage in the crust at the location of the large offset boundary fault; (ii) a stage of half-graben formation; (iii) a stage of full graben formation. The offset of the boundary faults becomes larger from the Hachijo Rift to the Torishima Rift and the east-west width of the rifts also widens to the south. This is presumably because the Hachijo Rift is an earlier rifting stage than the Sumisu and the Torishima Rifts. The more primitive structure in the rifting stage from the Torishima Rift to the Hachijo Rift is probably caused by the propagation of rifting from south to north. The structural difference between the rifts in the northern part and the Sofu and the Nishinoshima Rifts seems to be due to structural differences in the crust between the northern and the southern parts from the tectonic gap.     

Crustal movement along a collision boundary of plates (case of eastern Taiwan)

Recent crustal movements in eastern Taiwan were investigated based on geodetic and seismological data as a case study of the tectonics along a colliding plate boundary. Secular horizontal strain along the Longitudinal Valley, a probable arc-continent collision boundary between the Philippine Sea and Eurasion plates, is compressive with a large rate of 2 microstrains/year, and the maximum compression axis trends in NW-SE direction. This means that nearly two-thirds of the convergence rate between the two plates is consumed in the narrow zone along the valley and confirms the view that the valley is the plate boundary between the two. The amount of uplift in the Central Range, deduced from trigonometric leveling, reaches more than one meter during the past 60 years. Such active orogeny is caused by the high strain rate in this area. Horizontal displacement of the Coastal Range, a leading edge of the Philippine Sea plate, has a left-lateral component, suggesting that the boundary is a region of oblique collision and the range moves toward the north, producing subduction of the Philippine Sea plate off the Coast of northeastern Taiwan.An extensional strain pattern is found northeastern Taiwan near Hualien, in northern Taiwan near Ilan, and in southeastern Taiwan south Taitung. In northeastern Taiwan, the direction of the maximum extension axis is nearly parallel to the isodipth contours of deep-focus earthquakes that occurred under the southern part of the Ryukyu Trench. From a model calculation using a finite-element method, this pattern of strain is interpreted as an edge effect of the collision-subduction junction in northeastern Taiwan. The direction of the maximum extension in northern Taiwan forms high angles with the direction of the tectonic line near Ilan stretching from the Okinawa Trough. This fact is harmonious with the view that the Okinawa Trough is spreading. Extensional strain observed in southeastern Taiwan may be related to the eastward subduction since the area is situated on a transition zone, from collision to subduction.     

Iron oxidation state of a 2.45-Byr-old paleosol developed on mafic volcanics

The 2.45-Byr-old weathering profile developed on early Proterozoic mafic volcanics located near Cooper Lake, Ontario, Canada, was examined geochemically and mineralogically for a better understanding of the atmospheric oxygen evolution. Ferrous to ferric ion, Fe(II) and Fe(III), respectively, ratios of the bulk rock samples were analyzed by Mössbauer spectrometry. The total Fe (Fe(T)) and Fe(II) concentrations decrease from 12.0 and 11.2 wt.% to 1.85 and 0.89 wt.%, respectively, from the bottom to the top of the weathering profile. The Fe(T) and Fe(II) concentrations normalized to Ti and Zr, as well as the Fe(II)/Fe(III) ratio of raw data, linearly decrease with depth toward the top, while the Fe(III) concentration remains nearly constant throughout the profile. The linear decrease of Fe(II), accompanied by the nearly constant distribution of Fe(III), is difficult to be explained by the scenario of oxidizing weathering and subsequent reducing hydrothermal alteration. The behaviors of Fe(II) and Fe(III) can be simply explained by anoxic weathering. The anoxic weathering suggests that the 2.45-Ga atmosphere was anoxic. The slight increase of Fe/(Fe+Mg) in the octahedral sites of chlorite toward the top and no Ce anomaly in the REE patterns are also consistent with anoxic weathering.     

A new method of modelling the rock micro-fracturing process in double-torsion experiments using neural networks

Microfracturing of rock is a complicated damage evolution process. Inaccurate prediction of micro-fracturing behaviours suggests a need for the development of a better modelling method. Analysis of acoustic emission (AE) measurements in double-torsion tests indicates that micro-fracturing behaviours during the loading stage have fractal time structures. This fractal behaviour can be described by C(t) ∝ t^D, where D is the correlation exponent, t is the time and C(t) is the correlation integral. Furthermore, by utilizing measured AE data, a new method has been developed to model the AE behaviours of micro-fracturing in rock, in air, and following soaking in water and in a chemical solution of DTAB. The neutral models NN (10,21,2) and NN (10,20,2) were found to describe reasonably well the AE behaviours of micro-fracturing in rock under air and DTAB conditions, and water conditions, respectively. The cumulative AE events and the cumulative AE counts predicted by the neural models agreed well with those measured in experiments. Copyright © 1999 John Wiley & Sons, Ltd.     

Audio frequency magneto-telluric survey of Norikura Volcano in central Japan

Norikura Volcano has not been active during the last 10,000 years in spite of the activity of the surrounding volcanic mountains. To study past volcanic activities, geological studies were carried out extensively. However, quite a few geophysical investigations were conducted to contribute to volcanology. Our objective is to detect the present subsurface structure of Norikura Volcano and to define volcanic stratifications. In the vicinity of Norikura Volcano, geothermal fields are still active. Subsurface volcanic rocks in this area have been exposed to geothermal activity and altered. To comprehend volcanic stratifications of Norikura and geothermal activity, we conducted audio frequency magneto-telluric (AMT) surveys around Norikura Volcano. AMT survey is useful in clearly defining the resistivity structure related to volcanic regions. The AMT data were acquired over a frequency range 10 Hz–10 kHz. Decomposition analysis was applied to the tensor impedance data. Subsequently, apparent resistivity and phase data were inverted using a two-dimensional magneto-telluric (MT) inversion and a model of Norikura was derived. The final model manifests that the surface resistors are in agreement with andesite lava or dacite lava. As for the deeper structure, a horizontal conductor is situated above resistive basements. The alteration of the conductor was weak, while basement rocks were strongly altered and/or heated through the thermal activity. The existence of these layers seems to indicate the degree of thermal activity of Norikura Volcano.     

Variations in trace elements,isotopes, and organic geochemistry during the Hangenberg Crisis,Devonian–Carboniferous transition,northeastern Vietnam

The Hangenberg Crisis at the Devonian–Carboniferous boundary is known as a polyphase extinction event that affected more than 45 % of marine and terrestrial genera. As the cause of this event is still debated, analyses were carried out on sedimentary samples from the Devonian–Carboniferous Pho Han Formation in northeastern Vietnam to reconstruct the paleoenvironment around the time of this event using stable carbon isotopes; total sulfur; manganese; vanadium; molybdenum; and sedimentary organic matter, such as dibenzothiophenes, cadalene, and regular steranes. These geochemical signatures provide a high‐resolution redox history for this section and show that transgression‐driven high primary productivity, possibly enhanced by terrestrial input, caused severe oxygen depletion along the continental margin of the South China block during the Hangenberg Crisis.     

Distribution of fossil seawater and its role in Neogene sedimentary rock landslides in Niigata,eastern marginal region of the Japan Sea

The Neogene marine sedimentary rock area in the eastern marginal region of the Japan Sea is an area with some of the highest landslide densities in Japan. Some of the landslides in this area have been known to involve saline groundwater, which can be the cause of these landslides. In order to demonstrate the relationships between landslides and saline water, topographic, geological, groundwater, and electromagnetic surveys were performed in the eastern marginal region of the Japan Sea. Many landslides and gravitational slope deformations with linear depressions and small scarps were recognized in the study area. The resistivity profile obtained by an electromagnetic survey suggests that there is a wide zonal distribution of saline water with salt concentrations equivalent to seawater at depths of 50–100 m or more and that the groundwater shallower than 50 m has an electrical conductivity of less than 100 mS/m. The shallow resistive groundwater is inferred to be meteoric water that replaced the saline groundwater, which likely weakened the bedrock, resulting in landslides. A ridge of competent tuff overlying mudstone has many linear depressions from gravitational slope deformation and low‐resistivity water to a depth of 600 m, which suggests that the mudstone was weakened by water replacement and deformed under the tuff caprock. The saline groundwater is inferred to be fossil seawater trapped in pores during sediment deposition, which is brought near the ground surface along with rocks by tectonic movement in the hills. Thus, the saline water and its fresh water replacement are among the important basic causes of the landslides. The oil well data obtained in the eastern marginal region of the Japan Sea suggest that such saline water replacement has occurred widely and that replacement is likely one of the predispositions for the frequent landslides there.     

Damage sequence and safety margin assessment of expansion joints by shake table testing

The performance of nonstructural components has attracted attention, and previous large earthquakes have resulted in widespread damage to expansion joints. In contrast to the main structural components, for which ductility beyond the design tolerance is ensured, the safety margin of nonstructural components classified as the product of mechanical engineering, such as expansion joints, is uncertain. This paper investigates the damage sequence and safety margin of expansion joints through shake table testing. The expansion joints were installed to connect 2 rigid steel frames with short and long natural periods. Four commonly used types, high-performance and standard-performance floor and wall expansion joints, were tested. Seven damage patterns of the 4 expansion joints were observed, and most of the damage patterns were considered displacement dependent. The damage mechanisms and relative displacements at the moment of damage were identified by using strain gauges attached near collision and damage locations. The high-performance expansion joints showed only minor damage beyond the design motion range, whereas the standard-performance expansion joints exhibited minor damage below the design motion range and failure at the design motion range or slightly beyond. For each damage state, repair information was obtained through a questionnaire to an expansion joint manufacturer, and the sum of the initial cost and repair cost for high-performance and standard-performance expansion joints was compared. The results will be useful for the selection of expansion joints in the design process.     

Base shear capping buildings with graphite‐lubricated bases for collapse prevention in extreme earthquakes

Damage or collapse of buildings vulnerable to seismic forces may cause human casualties, and seismic upgrading of such structures is a practical solution to this deficiency. The study presented here proposes a simple approach to prevent structural collapse by separating the superstructure from its foundation to let the superstructure slide during extreme ground shaking. The sliding mechanism contributes to cap the horizontal force exerted on the superstructure. In such approach, the key is to maintain the friction force between the superstructure and the foundation sufficiently low and stable. This research proposes to realize a controlled sliding mechanism, which acts as a structural fuse, by means of carbon powder lubrication at the bases of the structure's columns. The fundamental behaviour of the proposed structural system, named the base shear capping building, is investigated by shaking table tests and numerical simulation. Both experimental and numerical results showed that graphite lubrication is an efficient and robust lubrication material, maintaining the friction coefficient between the steel column bases and mortar foundation at around 0.16. The sliding at the bases significantly reduced the acceleration transmitted to the superstructure, keeping the base shear coefficient not greater than about 0.40. Copyright © 2016 John Wiley & Sons, Ltd.