The role of long‐term human impact on avulsion and fan development

This study aims to understand (mainly qualitatively) the long‐term role of human impact on avulsion processes and the development of fluvial (mega‐) fans in semi‐arid environments. In this paper we refer to human impact as the direct influences of actions on the river's hydraulics (i.e. flow regulation, flow diversion and channel engineering). In five case‐studies drawn from the Khuzestan plains in southwest Iran we have analysed the setup and triggering conditions of specific avulsions that occurred in the past (timescale of millennia) and identified the role of human interference in their causation. Our analysis is based on the integration of historical, archaeological, geomorphological and geological data. Through this study we demonstrate that avulsions in the Khuzestan plains are the result of long‐term and complex interplay between multiple human‐induced and natural causes. In similar ways human‐induced actions may play important roles during different phases of avulsion development. The ‘success‘ of an avulsion in the post‐triggering phase may be defined by human‐induced setup causes as well as morphodynamic processes. We suggest that present‐day flood events may be partly inherited from long‐term human alterations of the natural processes. These finding could have implications for any fluvial system (e.g. distributive fluvial systems, deltas) where avulsion plays a major role in their development and research tends to emphasize on natural mechanisms. Copyright © 2016 John Wiley & Sons, Ltd.     

Assessing the effects of land cover and future climate conditions on the provision of hydrological services in a medium‐sized watershed of Portugal

The separated and combined effects of land‐cover scenarios and future climate on the provision of hydrological services were evaluated in Vez watershed, northern Portugal. Soil and Water Assessment Tool was calibrated against daily discharge, sediments and nitrates, with good agreements between model predictions and field observations. Four hypothetical land‐cover scenarios were applied under current climate conditions (eucalyptus/pine, oak, agriculture/vine and low vegetation). A statistical downscaling of four General Circulation Models, bias‐corrected with ground observations, was carried out for 2021–2040 and 2041–2060, using representative concentration pathway 4.5 scenario. Also, the combined effects of future climate conditions were evaluated under eucalyptus/pine and agriculture/vine scenario. Results for land cover revealed that eucalyptus/pine scenario reduced by 7% the annual water quantity and up to 17% in the summer period. Although climate change has only a modest effect on the reduction of the total annual discharge (?7%), the effect on the water levels during summer was more pronounced, between ?15% and ?38%. This study shows that climate change can affect the provision of hydrological services by reducing dry season flows and by increasing flood risks during the wet months. Regarding the combined effects, future climate may reduce the low flows, which can be aggravated with eucalyptus/pine scenario. In turn, peak flows and soil erosion can be offset. Future climate may increase soil erosion and nitrate concentration, which can be aggravated with agriculture scenario. Results moreover emphasize the need to consider both climate and land‐cover impacts in adaptation and land management options at the watershed scale. Copyright © 2015 John Wiley & Sons, Ltd.     

Separation of PP- and PS-wave reflected seismic data using two-dimensional finite offset common-reflection-surface traveltime approximation

Recently, the interest in PS-converted waves has increased for several applications, such as sub-basalt layer imaging, impedance estimates and amplitude-versus-offset analysis. In this study, we consider the problem of separation of PP- and PS-waves from pre-stacked multicomponent seismic data in two-dimensional isotropic medium. We aim to demonstrate that the finite-offset common-reflection-surface traveltime approximation is a good alternative for separating PP- and PS-converted waves in common-offset and common shot configurations by considering a two-dimensional isotropic medium. The five parameters of the finite-offset common-reflection-surface are firstly estimated through the inversion methodology called very fast simulated annealing, which estimates all parameters simultaneously. Next, the emergence angle, one of the inverted parameters, is used to build an analytical separation function of PP and PS reflection separation based on the wave polarization equations. Once the PP- and PS-converted waves were separated, the sections are stacked to increase the signal-to-noise ratio using the special curves derived from finite-offset common-reflection-surface approximation. We applied this methodology to a synthetic dataset from simple-layered to complex-structured media. The numerical results showed that the inverted parameters of the finite offset common-reflection-surface and the separation function yield good results for separating PP- and PS-converted waves in noisy common-offset and common shot gathers.     

Uncertainty analysis and probabilistic segmentation of electrical resistivity images: the 2D inverse problem

In this paper, we present the uncertainty analysis of the 2D electrical tomography inverse problem using model reduction and performing the sampling via an explorative member of the Particle Swarm Optimization family, called the Regressive‐Regressive Particle Swarm Optimization. The procedure begins with a local inversion to find a good resistivity model located in the nonlinear equivalence region of the set of plausible solutions. The dimension of this geophysical model is then reduced using spectral decomposition, and the uncertainty space is explored via Particle Swarm Optimization. Using this approach, we show that it is possible to sample the uncertainty space of the electrical tomography inverse problem. We illustrate this methodology with the application to a synthetic and a real dataset coming from a karstic geological set‐up. By computing the uncertainty of the inverse solution, it is possible to perform the segmentation of the resistivity images issued from inversion. This segmentation is based on the set of equivalent models that have been sampled, and makes it possible to answer geophysical questions in a probabilistic way, performing risk analysis.     

Identification of regions enriched or depleted in radioelements through nondistributional analysis of aerial radiometric data

Throughout the aerial radiometric reconnaissance survey portion of the U.S. Department of Energy's National Uranium Resource Evaluation (NURE) program, the identification of outliers (anomalies) was an important approach to locating regions with radio-element concentrations that are either higher or lower than expected. The method introduced herein to locate such regions involves three steps: selection of a high (or low) threshold for the variate of interest; use of the sample percentile to identify all points of interest; and movement of a window over the selected data to locate significant clusters of observations. These steps, applied to aerial radiometric ²¹⁴Bi (equivalent uranium) data collected over the Copper Mountain area in Wyoming, resulted in the identification of areas enriched in that variate.     

The Response of Estuarine Macrobenthic Communities to Natural- and Human-Induced Changes: Dynamics and Ecological Quality

Anthropogenic activities are a disturbance factor of coastal systems and can be widely recognized as a major threat to the health of coastal systems. However, natural events cannot be disregarded from management issues because of their significant influence on the communities living in these areas. Based on long-term subtidal data from the Mondego Estuary (Portugal), the effects of natural events (e.g., floods and droughts) on macrobenthic communities were compared with the anthropogenic events. Sampling stations were grouped into characteristic zones (mouth, north arm, south arm) so the community dynamics of each of these estuarine areas could be followed over time. Environmental assessment was performed for stations using the Benthic Assessment Tool (BAT), and compared with the existing pressures. Human impacts persist over a number of years and gradually reduce ecosystem health, as discussed in the European Water Framework Directive. Paradoxically, natural events cause stronger impacts but are of a shorter duration, which allows for a faster recovery of macrobenthic communities. The study showed that caution should be taken when developing and implementing water policies so as not to disregard the importance of the different events (natural and human-caused) on the ecosystem health (e.g., community degradation and water quality and ecological quality status assessment).     

Convergence analysis of fixed stress split iterative scheme for anisotropic poroelasticity with tensor Biot parameter

We perform a convergence analysis of the fixed stress split iterative scheme for the Biot system modeling coupled flow and deformation in anisotropic poroelastic media with tensor Biot parameter. The fixed stress split iterative scheme solves the flow subproblem with all components of the stress tensor frozen using a multipoint flux mixed finite element method, followed by the poromechanics subproblem using a conforming Galerkin method in every coupling iteration at each time step. The coupling iterations are repeated until convergence and Backward Euler is employed for time marching. The convergence analysis is based on studying the equations satisfied by the difference of iterates to show that the fixed stress split iterative scheme for anisotropic poroelasticity with Biot tensor is contractive. We also demonstrate that the scheme is numerically convergent using the classical Mandel’s problem solution for transverse isotropy.     

Isotope geochemistry of Paleoproterozoic metacarbonates from Itatuba,Borborema Province,Northeastern Brazil: Evidence of marble melting within a collisional suture

Strongly-deformed marbles may be easily confused with linear and elongated carbonatite intrusions. Both rocks may present similar texture and foliation to the host rock, or even cross cutting field relationships, which could be interpreted either as igneous or high-grade metamorphosed marble. Diagnostic criteria are even more complex when there is evidence of melting of the metasedimentary carbonate rock, such as has been described in the Himalayas and in the Eastern Ghats, India.In the Alto Moxotó Terrane, a high-grade gneissic domain of the Borborema Province, Northeastern Brazil, there are metacarbonates associated with banded gneisses and different metaplutonic rocks. Field evidence indicates the absence of other metasedimentary rocks associated with these marbles, thus suggesting that these carbonates were separated from other siliciclastic metasedimentary rocks. The presence of marble also suggests that it may represent the initial stage of a crustal carbon recycling into the mantle. These marbles present many field similarities to carbonatites (e.g., fluid-flow structure) and, together with metagranites and metamafic intrusions, may represent a major collisional tectonic suture.A detailed study of the carbon, oxygen and strontium isotopic composition of these marbles is presented. This study aims to identify the origin of the different isotopic components. It is argued that these rocks were subjected to temperature and pressure conditions that were sufficiently high to have melted them. The isotopic data presented here support this interpretation and indicate the mixing of two components: (i) one characterized by radiogenic Sr isotopes and mantle-like carbon isotopes, which is associated with the gneissic and mafic rocks, and (ii) another characterized by low ⁸⁷Sr/⁸⁶Sr ratios and highly positive δ¹³C values. Available geochemical data for the upper Paleoproterozoic indicate that the ⁸⁷Sr/⁸⁶Sr ratio of ocean water, varying between 0.7050 (2.25 ± 0.25 Ga) and 0.7047 (1.91 Ga), falls within the lower range of the samples from Itatuba and thus reinforces the interpretation that these marbles are sedimentary-derived and were partially contaminated by interaction with the host gneissic and mafic rocks.