Modeling Arctic Ocean heat transport and warming episodes in the 20th century caused by the intruding Atlantic Water

This study investigates the Arctic Ocean warming episodes in the 20th century using both a high-resolution coupled global climate model and historical observations. The model, with no flux adjustment, reproduces well the Atlantic Water core temperature （AWCT） in the Arctic Ocean and shows that four largest decadalscale warming episodes occurred in the 1930s, 70s, 80s, and 90s, in agreement with the hydrographic observational data. The difference is that there was no pre-warming prior to the 1930s episode, while there were two pre-warming episodes in the 1970s and 80s prior to the 1990s, leading the 1990s into the largest and prolonged warming in the 20th century. Over the last century, the simulated heat transport via Fram Strait and the Barents Sea was estimated to be, on average, 31.32 TW and 14.82 TW, respectively, while the Bering Strait also provides 15.94 TW heat into the west- ern Arctic Ocean. Heat transport into the Arctic Ocean by the Atlantic Water via Fram Strait and the Barents Sea correlates significantly with AWCT （ C = 0.75 ） at 0- lag. The modeled North Atlantic Oscillation （NAO） index has a significant correlation with the heat transport （ C = 0.37 ）. The observed AWCT has a significant correlation with both the modeled AWCT （ C =0.49） and the heat transport （ C =0.41 ）. However, the modeled NAO index does not significantly correlate with either the observed AWCT （ C = 0.03 ） or modeled AWCT （ C = 0.16 ） at a zero-lag, indicating that the Arctic climate system is far more complex than expected.     

Shock stage distribution of 2280 ordinary chondrites—Can bulk chondrites with a shock stage of S6 exist as individual rocks?

The brecciation and shock classification of 2280 ordinary chondrites of the meteorite thin section collection at the Institut für Planetologie (Münster) has been determined. The shock degree of S3 is the most abundant shock stage for the H and LL chondrites (44% and 41%, respectively), while the L chondrites are on average more heavily shocked having more than 40% of rocks of shock stage S4. Among the H and LL chondrites, 40–50% are “unshocked” or “very weakly shocked.” Considering the petrologic types, in general, the shock degree is increasing with petrologic type. This is the case for all meteorite groups. The main criteria to define a rock as an S6 chondrite are the solid‐state recrystallization and staining of olivine and the melting of plagioclase often accompanied by the formation of high‐pressure phases like ringwoodite. These characteristics are typically restricted to local regions of a bulk chondrite in or near melt zones. In the past, the identification of high‐pressure minerals (e.g., ringwoodite) was often taken as an automatic and practical criterion for a S6 classification during chondrite bulk rock studies. The shock stage classification of many significantly shocked chondrites (>S3) revealed that most ringwoodite‐bearing rocks still contain more than 25% plagioclase (74%). Thus, these bulk chondrites do not even fulfill the S5 criterion (e.g., 75% of plagioclase has to be transformed into maskelynite) and have to be classified as S4. Studying chondrites on typically large thin sections (several cm²) and/or using samples from different areas of the meteorites, bulk chondrites of shock stage S6 should be extremely rare. In this respect, the paper will discuss the probability of the existence of bulk rocks of S6.     

Classification of CM chondrite breccias—Implications for the evaluation of samples from the OSIRIS‐REx and Hayabusa 2 missions

CM chondrites are complex impact (mostly regolith) breccias, in which lithic clasts show various degrees of aqueous alteration. Here, we investigated the degree of alteration of individual clasts within 19 different CM chondrites and CM‐like clasts in three achondrites by chemical analysis of the tochilinite‐cronstedtite‐intergrowths (TCIs; formerly named “poorly characterized phases”). To identify TCIs in various chondritic lithologies, we used backscattered electron (BSE) overview images of polished thin sections, after which appropriate samples underwent electron microprobe measurements. Thus, 75 lithic clasts were classified. In general, the excellent work and specific criteria of Rubin et al. (2007) were used and considered to classify CM breccias in a similar way as ordinary chondrite breccias (e.g., CM2.2‐2.7). In BSE images, TCIs in strongly altered fragments in CM chondrites (CM2.0‐CM2.2) appear dark grayish and show a low contrast to the surrounding material (typically clastic matrix), and can be distinguished from TCIs in moderately (CM2.4‐CM2.6) or less altered fragments (CM2.7‐CM2.9); the latter are bright and have high contrast to the surroundings. We found that an accurate subclassification can be obtained by considering only the “FeO”/SiO₂ ratio of the TCI chemistry. One could also consider the TCIs’ S/SiO₂ ratio and the metal abundance, but these were not used for classification due to several disadvantages. Most of the CM chondrites are finds that have suffered terrestrial weathering in hot and cold deserts. Thus, the observed abundance of metal is susceptible to weathering and may not be a reliable indicator of subtype classification. This study proposes an extended classification scheme based on Rubin’s scale from subtypes CM2.0‐CM2.9 that takes the brecciation into account and includes the minimum to maximum degree of alteration of individual clasts. The range of aqueous alteration in CM chondrites and small spatial scale of mixing of clasts with different alteration histories will be important for interpreting returned samples from the OSIRIS‐REx and Hayabusa 2 missions in the future.     

Holocene landscape evolution and its impact on the neolithic and bronze age sites in the Shangqiu area,Northern China

The Shangqiu area, situated on the alluvial plain of the lower Yellow River, is traditionally considered the center of the predynastic and early Shang culture. Archaeologic remains dating to predynastic and dynastic Shang periods, however, have remained elusive. The current pattern of Neolithic and Bronze Age sites is characterized by their upland settings; and it has been often assumed that the area had the same landscape from the Neolithic through recent historic time. The potential impact of geomorphic processes on these early sites has been hardly considered in developing archaeologic models of temporal and spatial distribution of these sites. This article first presents a reconstruction of the Holocene floodplain history in the archaeologically significant area. On the basis of stratigraphy and sedimentology, a Holocene landscape evolution model is constructed to explore the interrelationship between evolving landscape and archaeologic record of the Neolithic and Bronze Age. The prolonged landscape stability from very late Pleistocene or early Holocene to 2000 yr B. P. provided potential Neolithic and Bronze Age human occupation with a favorable physical environment. After 2000 yr B. P., the hydrologic regime changed and the floodplain experienced 2-3 m of gradual vertical accretion during the following millennium. In response to the dramatic change of hydro-logic regime after the early 12th century A. D., a new floodplain formed by dominantly overbank deposition, and the old floodplain surfaces are covered by as much as ten meters of the younger alluvium. As a result, a pronounced effect has been imposed on the preservation, visibility, and discovery of the Neolithic and Bronze Age sites, including those sites of predynastic and early Shang phases. Thus, much difficulty has been imparted to our understanding of the configuration of these early archaeologic sites. This study demonstrates the usefulness of landscape reconstruction in developing settlement models of Neolithic and Bronze age sites in the area.     

Combining pixel and object based image analysis of ultra-high resolution multibeam bathymetry and backscatter for habitat mapping in shallow marine waters

Habitat mapping data are increasingly being recognised for their importance in underpinning marine spatial planning. The ability to collect ultra-high resolution (cm) multibeam echosounder (MBES) data in shallow waters has facilitated understanding of the fine-scale distribution of benthic habitats in these areas that are often prone to human disturbance. Developing quantitative and objective approaches to integrate MBES data with ground observations for predictive modelling is essential for ensuring repeatability and providing confidence measures for habitat mapping products. Whilst supervised classification approaches are becoming more common, users are often faced with a decision whether to implement a pixel based (PB) or an object based (OB) image analysis approach, with often limited understanding of the potential influence of that decision on final map products and relative importance of data inputs to patterns observed. In this study, we apply an ensemble learning approach capable of integrating PB and OB Image Analysis from ultra-high resolution MBES bathymetry and backscatter data for mapping benthic habitats in Refuge Cove, a temperate coastal embayment in south-east Australia. We demonstrate the relative importance of PB and OB seafloor derivatives for the five broad benthic habitats that dominate the site. We found that OB and PB approaches performed well with differences in classification accuracy but not discernible statistically. However, a model incorporating elements of both approaches proved to be significantly more accurate than OB or PB methods alone and demonstrate the benefits of using MBES bathymetry and backscatter combined for class discrimination.     

The connection between Labrador Sea buoyancy loss, deep western boundary current strength, and Gulf Stream path in an ocean circulation model

The sensitivity of the North Atlantic gyre circulation to high latitude buoyancy forcing is explored in a global, non-eddy resolving ocean general circulation model. Increased buoyancy forcing strengthens the deep western boundary current, the northern recirculation gyre, and the North Atlantic Current, which leads to a more realistic Gulf Stream path. High latitude density fluxes and surface water mass transformation are strongly dependent on the choice of sea ice and salinity restoring boundary conditions. Coupling the ocean model to a prognostic sea ice model results in much greater buoyancy loss in the Labrador Sea compared to simulations in which the ocean is forced by prescribed sea ice boundary conditions. A comparison of bulk flux forced hindcast simulations which differ only in their sea ice and salinity restoring forcings reveals the effects of a mixed thermohaline boundary condition transport feedback whereby small, positive temperature and salinity anomalies in subpolar regions are amplified when the gyre spins up as a result of increased buoyancy loss and convection. The primary buoyancy flux effects of the sea ice which cause the simulations to diverge are ice melt, which is less physical in the diagnostic sea ice model, and insulation of the ocean, which is less physical with the prognostic sea ice model. Increased salinity restoring ensures a more realistic net winter buoyancy loss in the Labrador Sea, but it is found that improvements in the Gulf Stream simulation can only be achieved with the excessive buoyancy loss associated with weak salinity restoring.     

Singular value decomposition and cluster analysis as regression diagnostics tools for geodetic applications

It is well known that high-leverage observations significantly affect the estimation of parameters. In geodetic literature, mainly redundancy numbers are used for the detection of single high-leverage observations or of single redundant observations. In this paper a further objective method for the detection of groups of important and less important (and thus redundant) observations is developed. In addition, the parameters which are predominantly affected by these groups of observations are identified. This method thus complements other diagnostics tools, such as, e.g., multiple row diagnostics methods as described in statistical literature (see, e.g., Belsley et al. in Regression diagnostics: identifying influential data and sources of collinearity. Wiley, New York, 1980). The method proposed in this paper is based on geometric aspects of adjustment theory and uses the singular value decomposition of the design matrix of an adjustment problem together with cluster analysis methods for regression diagnostics. It can be applied to any geodetic adjustment problem and can be used for the detection of (groups of) observations that significantly affect the estimated parameters or that are of negligible impact. One of the advantages of the proposed method is the improvement of the reliability of observation plans and thus the reduction of the impact of individual observations (and outliers) on the estimated parameters. This is of particular importance for the very long baseline interferometry technique which serves as an application example of the regression diagnostics tool.     

Characterization of ultrafine aerosol particles in Mt. Etna emissions

Particulate emissions from Mt. Etna in the fine-size range below 100 nm were studied in June and September 1989. The aerosol particles were characterized by size, concentration and photoelectric activity. These quantities are sensitive to the physical and chemical properties of the magma. Concentrations varied from 10⁴ to 10⁷ cm^-3. The size distributions peak below 20 nm (radius) and are very narrow. The particles are generated mainly by nucleation and condensation of magmatic volatiles in a strong temperature gradient. The photoelectric activity of these particles can indicate high magma levels and increased exsolution of volatiles. It is therefore related to the observed activity of the respective crater and may be helpful as a prediction tool when used in conjunction with other volcano-monitoring techniques.     

Correlation between regional and global seismic activity

The regional seismic activity in Sweden is significantly correlated to the global seismic activity. This result suggests that the regional Swedish activity is linked to the global activity by intraplate tectonics, rather than being caused exclusively by regional effects, such as the land uplift after the last glaciation.     

Introduction to soil degradation processes in drylands

Two efforts by UN organizations to diagnose and map the distribution and trends of soil degradation in drylands are briefly described and compared.Soil degradation by water is greatly accelerated under poor vegetation cover in the Tropics and Subtropics, probably for two major reasons: high rates of decomposition of organic matter and high intensities of rainfall. The consequences of soil losses and high water runoff can reach far downstream in the river basin, causing damage by sedimentation on floodplains and in reservoirs.Damages by wind erosion and deposition are also much accelerated by overexploitation of the meagre vegetation cover of drylands. Overgrazing, overcultivation, firewood collection are the consequences of human and animal pressure, leading to more or less long-lasting desertification. The finer material, clay, silt, and organic matter, is blown by dust storms over long distances and can be deposited as dry or wet fallout in oceans or on land under the dust trajectories.Salinization often affects highly productive soils under poor irrigation practices. It is therefore a form of dryland degradation which causes particularly high losses of potential crops.