Impact angle influence in high velocity dust collisions during planetesimal formation

We have examined the influence of impact angle in collisions between small dust aggregates and larger dust targets through laboratory experiments. Targets consisted of μm-sized quartz dust and had a porosity of about 67%; the projectiles, between 1 and 5 mm in diameter, were slightly more compact (64% porosity). The collision velocity was centered at 20 m/s and impact angles range from 0° to 45°. At a given impact angle, the target gained mass for projectiles smaller than a threshold size, which decreases with increasing angle from about 3 mm to 1 mm. The fact that growth is possible up to the largest angles studied supports the idea of planetesimal formation by sweep-up of small dust aggregates.     

Models of Very-High-Energy Gamma-Ray Emission from the Jets of Microquasars: Orbital Modulation

The recent detection of very-high-energy (GeV – TeV) γ-ray emission from the Galactic black-hole candidate and microquasar LS 5039 has sparked renewed interest in jet models for the high-energy emission in those objects. In this work, we have focused on models in which the high-energy emission results from synchrotron and Compton emission by relativistic electrons in the jet (leptonic jet models). Particular attention has been paid to a possible orbital modulation of the high-energy emission due to azimuthal asymmetries caused by the presence of the companion star. Both orbital-phase dependentγγ absorption and Compton scattering of optical/UV photons from the companion star may lead to an orbital modulation of the gamma-ray emission. We make specific predictions which should be testable with refined data from HESS and the upcoming GLAST mission.     

Chromospheric Height and Density Measurements in a Solar Flare Observed with RHESSI – II. Data Analysis

We present an analysis of hard X-ray imaging observations from one of the first solar flares observed with the Reuven Ramaty High-Energy Solar Spectroscopic Imager (RHESSI) spacecraft, launched on 5 February 2002. The data were obtained from the 22 February 2002, 11:06 UT flare, which occurred close to the northwest limb. Thanks to the high energy resolution of the germanium-cooled hard X-ray detectors on RHESSI we can measure the flare source positions with a high accuracy as a function of energy. Using a forward-fitting algorithm for image reconstruction, we find a systematic decrease in the altitudes of the source centroids z(ε) as a function of increasing hard X-ray energy ε, as expected in the thick-target bremsstrahlung model of Brown. The altitude of hard X-ray emission as a function of photon energy ε can be characterized by a power-law function in the ε=15–50 keV energy range, viz., z(ε)≈2.3(ε/20 keV)^−1.3 Mm. Based on a purely collisional 1-D thick-target model, this height dependence can be inverted into a chromospheric density model n(z), as derived in Paper I, which follows the power-law function n _e(z)=1.25×10¹³(z/1 Mm)^−2.5 cm⁻³. This density is comparable with models based on optical/UV spectrometry in the chromospheric height range of h≲1000 km, suggesting that the collisional thick-target model is a reasonable first approximation to hard X-ray footpoint sources. At h≈1000–2500 km, the hard X-ray based density model, however, is more consistent with the `spicular extended-chromosphere model' inferred from radio sub-mm observations, than with standard models based on hydrostatic equilibrium. At coronal heights, h≈2.5–12.4 Mm, the average flare loop density inferred from RHESSI is comparable with values from hydrodynamic simulations of flare chromospheric evaporation, soft X-ray, and radio-based measurements, but below the upper limits set by filling-factor insensitive iron line pairs.     

Reconstruction of RHESSI Solar Flare Images with a Forward Fitting Method

We describe a forward-fitting method that has been developed to reconstruct hard X-ray images of solar flares from the Ramaty High-Energy Solar Spectroscopic Imager (RHESSI), a Fourier imager with rotation-modulated collimators that was launched on 5 February 2002. The forward-fitting method is based on geometric models that represent a spatial map by a superposition of multiple source structures, which are quantified by circular gaussians (4 parameters per source), elliptical gaussians (6 parameters), or curved ellipticals (7 parameters), designed to characterize real solar flare hard X-ray maps with a minimum number of geometric elements. We describe and demonstrate the use of the forward-fitting algorithm. We perform some 500 simulations of rotation-modulated time profiles of the 9 RHESSI detectors, based on single and multiple source structures, and perform their image reconstruction. We quantify the fidelity of the image reconstruction, as function of photon statistics, and the accuracy of retrieved source positions, widths, and fluxes. We outline applications for which the forward-fitting code is most suitable, such as measurements of the energy-dependent altitude of energy loss near the limb, or footpoint separation during flares. Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1023/A:1022469811115     

From old Globular Clusters to early Structures in the Universe: the Formation of old, metal-poor Halos around early-type Galaxies

Old, metal-poor globular clusters trace the formation and evolution of early-type galaxies. Their are the best probes, at low redshift, of the building-up of galaxy halos at high redshift. Their properties constrain the characteristics of their progenitors. Recent results suggest that DLAs atz > 3 are the likely hosts for their formation. Finally, they shed light on the old, metal-poor halos probably present around all early-type galaxies. This revised version was published online in September 2006 with corrections to the Cover Date.     

AGB Phase Transition in Globular Clusters: A Tool for Dating Starbursts

A new method to detect and study young star clusters is presented. This is based on the knowledge that the light of stellar populations with ages between ∼ 200 Myr and ∼ 1/2 Gyr is dominated by very red, bright AGB stars. Star clusters undergoing this so-called ‘AGB phase transition’ are featured by very red V-K colours, like those of Magellanic Clouds clusters, while optical colours like B-V remain blue typical for young populations. The best channel for detecting star clusters in this age range is therefore the near IR. From the theoretical side, SSP models including properly the contribution of the bright AGB are required (Maraston, 1998). Using this strategy, we succesfully detected the AGB phase transition among the clusters of the merger remnant galaxy NGC 7252 (see Maraston etal., 2001). This revised version was published online in September 2006 with corrections to the Cover Date.     

Shock stage distribution of 2280 ordinary chondrites—Can bulk chondrites with a shock stage of S6 exist as individual rocks?

The brecciation and shock classification of 2280 ordinary chondrites of the meteorite thin section collection at the Institut für Planetologie (Münster) has been determined. The shock degree of S3 is the most abundant shock stage for the H and LL chondrites (44% and 41%, respectively), while the L chondrites are on average more heavily shocked having more than 40% of rocks of shock stage S4. Among the H and LL chondrites, 40–50% are “unshocked” or “very weakly shocked.” Considering the petrologic types, in general, the shock degree is increasing with petrologic type. This is the case for all meteorite groups. The main criteria to define a rock as an S6 chondrite are the solid‐state recrystallization and staining of olivine and the melting of plagioclase often accompanied by the formation of high‐pressure phases like ringwoodite. These characteristics are typically restricted to local regions of a bulk chondrite in or near melt zones. In the past, the identification of high‐pressure minerals (e.g., ringwoodite) was often taken as an automatic and practical criterion for a S6 classification during chondrite bulk rock studies. The shock stage classification of many significantly shocked chondrites (>S3) revealed that most ringwoodite‐bearing rocks still contain more than 25% plagioclase (74%). Thus, these bulk chondrites do not even fulfill the S5 criterion (e.g., 75% of plagioclase has to be transformed into maskelynite) and have to be classified as S4. Studying chondrites on typically large thin sections (several cm²) and/or using samples from different areas of the meteorites, bulk chondrites of shock stage S6 should be extremely rare. In this respect, the paper will discuss the probability of the existence of bulk rocks of S6.     

Northwest Africa 11024—A heated and dehydrated unique carbonaceous (CM) chondrite

Based on the high abundance of fine‐grained material and its dark appearance, NWA 11024 was recognized as a CM chondrite, which is also confirmed by oxygen isotope measurements. But contrary to known CM chondrites, the typical phases indicating aqueous alteration (e.g., phyllosilicates, carbonates) are missing. Using multiple analytical techniques, this study reveals the differences and similarities to known CM chondrites and will discuss the possibility that NWA 11024 is the first type 3 CM chondrite. During the investigation, two texturally apparent tochilinite–cronstedtite intergrowths were identified within two thin sections. However, the former phyllosilicates were recrystallized to Fe‐rich olivine during a heating event without changing the textural appearance. A peak temperature of 400–600 °C is estimated, which is not high enough to destroy or recrystallize calcite grains. Thus, calcites were never constituents of the mineral paragenesis. Another remarkable feature of NWA 11024 is the occurrence of unknown clot‐like inclusions (UCLIs) within fine‐grained rims, which are unique in this clarity. Their density and S concentration are significantly higher than of the surrounding fine‐grained rim and UCLIs can be seen as primary objects that were not formed by secondary alteration processes inside the rims. Similarities to chondritic and cometary interplanetary dust particles suggest an ice‐rich first‐generation planetesimal for their origin. In the earliest evolution, NWA 11024 experienced the lowest degree of aqueous alteration of all known CM chondrites and subsequently, a heating event dehydrated the sample. We suggest to classify the meteorite NWA 11024 as the first type 3 CM chondrite similar to the classification of CV3 chondrites (like Allende) that could also have lost their matrix phyllosilicates by thermal dehydration.     

First VLTI observations of Mira stars

We present first observations of Mira stars obtained at the Very Large Telescope Interferometer (VLTI) at 2 microns, equipped with the VINCI instrument, using different baselines with both the test siderostats and the 8.2 m unit telescopes. These observations, collected in the course of the VLTI commissining program, have targeted so far about sixty cool giant stars. In this talk, we list and describe the measurements obtained for 14 Mira stars, many of them representing first-time determinations of the visibility. In particular, we devote special attention to a study of Mira itself, for which very accurate determinations of the visibility at several baseline lenghts and orientations could be obtained. We find that a two-component model is more consistent with the data than a single stellar disc. Further observations are needed for a better understanding of this source. The VLTI will constitute an ideal instrument for such studies in the future. In particular it will permit detailed investigations of southern AGB stars, such as accurate measurements of surface structureparameters (diameters, diameter variations, asymmetries, center-to-limbvariations, special features like hot spots) and of circumstellar envelopes. This revised version was published online in July 2006 with corrections to the Cover Date.     

Optimal Compensation and Implementation for Adaptive Optics Systems

This paper develops a compensation algorithm based on Linear–Quadratic–Gaussian (LQG) control system design whose parameters are determined (in part) by a model of the atmosphere. The model for the atmosphere is based on the open-loop statistics of the atmosphere as observed by the wavefront sensor, and is identified from these using an auto-regressive, moving average (ARMA) model. The (LQG) control design is compared with an existing compensation algorithm for a simulation developed at ESO that represents the operation of MACAO adaptive optics system on the 8.2 m telescopes at Paranal, Chile. This revised version was published online in July 2006 with corrections to the Cover Date.