Thermal alteration of hydrated minerals during hypervelocity capture to silica aerogel at the flyby speed of Stardust

Abstract— Outside the Earth's atmosphere, silica aerogel is one of the best materials to capture finegrained extraterrestrial particles in impacts at hypervelocities. Because silica aerogel is a superior insulator, captured grains are inevitably influenced by frictional heat. Therefore, we performed laboratory simulations of hypervelocity capture by using light‐gas guns to impact into aerogels finegrained powders of serpentine, cronstedtite, and Murchison CM2 meteorite. The samples were shot at >6 km s^?1 similar to the flyby speed at comet P/Wild‐2 in the Stardust mission. We investigated mineralogical changes of each captured particle by using synchrotron radiation X‐ray diffraction (SR‐XRD), transmission electron microscope (TEM), and field emission scanning electron microscope (FE‐SEM). SR‐XRD of each grain showed that the majority of the bulk grains keep their original mineralogy. In particular, SR‐XRD and TEM investigations clearly exemplified the presence of tochilinite whose decomposition temperature is about 300 °C in the interior of the captured Murchison powder. However, TEM study of these grains also revealed that all the samples experienced melting and vesiculation on the surface. The cronstedtite and the Murchison meteorite powder show remarkable fracturing, disaggregation, melting, and vesiculation. Steep thermal gradients, about 2500 °C/μm were estimated near the surface of the grains (<2 μm thick) by TEM observation. Our data suggests that the interior of >4 μm across residual grains containing abundant materials that inhibit temperature rise would have not experienced >300 °C at the center.     

A Reflection on Mg, Cd, Ca, Li and Si Isotopic Measurements and Related Reference Materials

This contribution aims to report the reflections we had with the scientific community during two international workshops on reference materials for stable isotopes in Davos (2002) and Nice (2003). After evaluating the isotopic homogeneity of some existing reference materials, based on either certificates, literature data or specific inter-laboratory rounds, we confirm these as primary reference materials or propose new ones relative to which stable isotope compositions should be reported. We propose DSM-3 for Mg, NIST SRM 915a for Ca, L-SVEC for Li and NBS28 for Si. Cadmium does not yet have a well identified delta zero material, although three commercial mono-elemental Cd solutions have yielded the same isotopic composition relative to one another. In order to scale the linearity of any mass spectrometer, some secondary reference materials are also proposed: Cambridge-1 solution for Mg, the "Münster-Cd" and JEPPIM Cd solutions for Cd and the "Big Batch" silicate for Si. The team from Nancy propose to prepare a mixed spike solution for Li isotopes. Well-characterised natural samples such as ocean or continental waters, diatoms, sponges, rocks and minerals are needed to validate the entire analytical procedure, particularly to take into account the effect of sample mineralisation and of chemical manipulations for elemental separation prior to analysis.     

Experimental evaluation of biases associated with sampling estuarine fishes with seines

Beach seines are widely used to estimate the density and species richness of fishes in estuaries. We evaluated the causes and extent of bias in estimates from seines using a series of field experiments in small estuaries in southern California, USA. Seining in spatially paired areas that were either enclosed by block nets or not, revealed that seines used without block nets und erestimated density by more than 4-fold and species richness by more than 2-fold relative to blocked areas. Seining in paired blocked areas with seines of two lengths revealed that net length affected estimates of density, but not species richness; a 7.6-m long seine produced 1.6-fold higher estimates of total density than did a 15.2-m long seine due to increased catches of demersal fishes, but not midwater species. Paired sampling in blocked areas also revealed that many fishes initially evaded capture by the seine. Estimates of density but not species richness were significantly higher in areas through which a seine was swept 5 times compared to once. This was due to higher catches of demersal fishes but not midwater fishes in areas seined 5 times. Repeated seining through blocked areas revealed that the vast majority (90% or more) of species and individuals of midwater fishes were captured within the first 5 sweeps, compared to only about 50% of the individuals of demersal species. A mark-recapture study in blocked areas revealed lower probabilities of capture for demersal species relative to midwater species.     

Late Quaternary paleoclimate of western Alaska inferred from fossil chironomids and its relation to vegetation histories

Fossil Chironomidae assemblages (with a few Chaoboridae and Ceratopogonidae) from Zagoskin and Burial Lakes in western Alaska provide quantitative reconstructions of mean July air temperatures for periods of the late-middle Wisconsin (～39,000–34,000 cal yr B.P.) to the present. Inferred temperatures are compared with previously analyzed pollen data from each site summarized here by indirect ordination. Paleotemperature trends reveal substantial differences in the timing of climatic warming following the late Wisconsin at each site, although chronological uncertainty exists. Zagoskin Lake shows early warming beginning at about 21,000 cal yr B.P., whereas warming at Burial Lake begins ～4000 years later. Summer climates during the last glacial maximum (LGM) were on average ～3.5 °C below the modern temperatures at each site. Major shifts in vegetation occurred from ～19,000 to 10,000 cal yr B.P. at Zagoskin Lake and from ～17,000 to 10,000 cal yr B.P. at Burial Lake. Vegetation shifts followed climatic warming, when temperatures neared modern values. Both sites provide evidence of an early postglacial thermal maximum at ～12,300 cal yr B.P. These chironomid records, combined with other insect-based climatic reconstructions from Beringia, indicate that during the LGM: (1) greater continentality likely influenced regions adjacent to the Bering Land Bridge and (2) summer climates were, at times, not dominated by severe cold.     

A field test of tubino's (1991) model of alternate bar formation

This study investigates the fluvial dynamics of straight natural stream channels. In particular, this experimental field study quantitatively assesses a physically based non-linear mathematical theory of alternate bar formation under unsteady natural flow conditions within a straight alluvial stream. The study site is an artificially straightened section of the Embarras River located approximately 16 km south of Champaign, Illinois. Data were collected on channel form, gradient, alternate bar dimensions, bed sediment size and flow stage over a 2 year study period. Both linear and non-linear steady flow hydrodynamic theories suggest that alternate bars are critical to the process of meander development. But these theories do not predict bar development for unsteady flow conditions, which typically occur in natural alluvial channels. Tubino (1991) suggests that bar evolution for a flood hydrograph can be divided into three parts: (1) a period of limited bar growth during the rising stage of the flood; (2) a stage of modest bar decay near the peak of the flood; and (3) a stage of non-linear bar growth during the prolonged falling stage of the flood. Bars developed during the falling limb of a hydrograph, and exhibited sequential development rather than the uniform growth along the reach predicted by Tubino's model. As flow stage decreased, short, low, fine-grained bars were superimposed on long, high and coarser-grained bars that developed under preceding high flow stages. These results suggest that the process of bar formation in artificially straightened natural streams with heterogeneous bed material may occur under different flow conditions and in a different manner than predicted by theoretical models. Further work should focus on attempting to isolate the physical mechanisms responsible for alternate bar formation in straight natural streams with heterogeneous bed material and flashy hydrologic flow regimes.     

Detectors For Space Science

The design of detector systems for flight applications requires the consideration of a number of issues unique to space instrumentation. Flight detectors must endure hostile radiation environments and thermal extremes. Paramount importance is given to reliability since inflight replacement is at best difficult and usually impossible. Flight detectors are also significant cost and design drivers since they often determine key requirements for flight instruments such as volume, mass, power consumption, heat dissipation and communications budgets. In this paper we describe the primary concerns in developing flight detector systems, and review the challenges posed by future NASA and ESA space science missions for detector development.     

Simplification and Validation of a Spectral-Tensor Model for Turbulence Including Atmospheric Stability

A spectral-tensor model of non-neutral, atmospheric-boundary-layer turbulence is evaluated using Eulerian statistics from single-point measurements of the wind speed and temperature at heights up to 100 m, assuming constant vertical gradients of mean wind speed and temperature. The model has been previously described in terms of the dissipation rate \(\epsilon \), the length scale of energy-containing eddies \(\mathcal {L}\), a turbulence anisotropy parameter \(\varGamma \), the Richardson number Ri, and the normalized rate of destruction of temperature variance \(\eta _\theta \equiv \epsilon _\theta /\epsilon \). Here, the latter two parameters are collapsed into a single atmospheric stability parameter z / L using Monin–Obukhov similarity theory, where z is the height above the Earth’s surface, and L is the Obukhov length corresponding to \(\{Ri,\eta _\theta \}\). Model outputs of the one-dimensional velocity spectra, as well as cospectra of the streamwise and/or vertical velocity components, and/or temperature, and cross-spectra for the spatial separation of all three velocity components and temperature, are compared with measurements. As a function of the four model parameters, spectra and cospectra are reproduced quite well, but horizontal temperature fluxes are slightly underestimated in stable conditions. In moderately unstable stratification, our model reproduces spectra only up to a scale \(\sim \) 1 km. The model also overestimates coherences for vertical separations, but is less severe in unstable than in stable cases.     

Post-breakup basaltic magmatism along the East Greenland Tertiary rifted margin

Mafic and ultramafic intrusions in East Greenland adjacent to the offshore Greenland–Iceland ridge were emplaced 5–9 My after continental breakup at 55 Ma [1]. Rare earth element (REE) concentrations determined by secondary ion mass spectrometry are reported for cumulus clinopyroxene from these intrusions, and the data are used to estimate REE abundance in equilibrium melts using available partitioning data. Estimated equilibrium melts from intrusions have strongly fractionated REE patterns with Nd/Dy(N) in the range 2 to 5.6 and Yb/Dy(N) 0.55 to 0.92, similar to values for coeval basalts. These melts have markedly higher Nd/Dy(N) than earlier breakup related flood basalts. The moderately low Yb/Dy(N) for the post-breakup volcanism is indicative of residual garnet in the source, while their high Nd/Dy(N) ratios can best be explained by aggregating low degree melts from a light-REE-enriched garnet- and spinel-bearing mantle source. We also report He, Sr, and Nd isotopic data for the intrusions. The highest ³He/⁴He ratios (>10 R/R_a) are found in the samples whose REE data reflect the largest proportion of melts from a garnet-bearing source, and having Sr and Nd isotopic compositions identical with the radiogenic Sr and unradiogenic Nd isotope end of the Iceland compositional field. There is no indication of a MORB-type mantle in the source of the intrusions. We postulate that post-breakup volcanism along the East Greenland coastline reflects the increasing proximity of the mantle plume to the East Greenland continental margin. The low degree of melting at high mean pressure inferred for the parental melts for the intrusions may reflect re-thickening of the lithosphere, which in turn was caused by the vigorous volcanism during breakup, with accompanying depletion of upper mantle and underplating of the crust at the continental margin.     

PM2.5 co-benefits of climate change legislation part 2: California governor’s executive order S-3-05 applied to the transportation sector

California Governor’s Executive Order (CGEO) S-3-05 requires that California greenhouse gas (GHG) emissions be reduced to 80 % below 1990 levels by the year 2050. Meeting this target will require drastic changes in transportation technology, fuel, and behavior which will reduce criteria pollutant emissions as well as GHG emissions. The improvement to local air quality caused by the reduced criteria pollutant emissions must be calculated to fully evaluate the overall benefits and costs of CGEO S-3-05. In the present study, seven different transportation scenarios that move towards the goals of CGEO S-3-05 in the transportation sector were examined to determine how they would affect future airborne particulate matter (PM_2.5) concentrations in California: (1) hydrogen fuel cells, (2) electric vehicles, (3) high efficiency vehicles, (4) public mass transit, (5) biofuels, (6) biofuels + hybrid electric vehicles, and (7) hydrogen fuel cells + electric vehicles. The air quality implications of each scenario were evaluated using a chemical transport model applied during a wintertime stagnation episode representing future climate in California. Scenarios (6) and (7) reduced population-weighted PM_2.5 mass concentrations by ~9 % and PM_2.5 elemental carbon (EC) concentrations by ~30 % relative to base-case predictions.     

EVIDENCE FOR THE PRESENCE OF LOW MOLECULAR WEIGHT ALCOHOLS AND CARBONYL COMPOUNDS IN THE MURCHISON METEORITE†

Alcohols, aldehydes and ketones identified in the Murchison C2 chondrite include: methanol, ethanol, 2-propanol, butyl alcohols, formaldehyde, acetaldehyde, propionaldehyde, acetone, 2-butanone, 3-pentanone and 2-pentanone.