Über den Eisengehalt von Alumosilikaten aus Quarzknauern

Zusammenfassung Der Eisengehalt von Andalusiten und Disthenen aus Quarzknauern im Gebiet des Ötztaler—Stubaier Altkristallins wurde regional untersucht. Der Gehalt and Gesamteisen in primären Disthen liegt zwischen 0,17 und 0,22 Gew.% Fe₂O₃, während primäre Andalusite zwischen 0,26 und 1,93 Gew.% Fe₂O₃ schwanken. Dieser Unterschied in den Andalusiten wird auf ein wechselndes Angebot von Fe₂O₃ aus dem Nachbargestein der Knauern zurückgeführt.Ein Zusammenhang zwischen dem Eisengehalt der Andalusite und den verschiedenen Umwandlungsstadien Andalusit—Disthen konnte nicht nachgewiesen werden.

---

On the iron content of alumosilicates in quartz nodules

Summary A determination of the regional distribution of the ironcontent of andalusites and kyanites in quartz-segregations of the Oetztal—Stubai crystalline complex gave values of 0.17–0.22% for the total iron in primary kyanite and 0.26–1.93% in andalusite. This difference is probably due to a variation in the Fe₂O₃-content in the country rocks of the quartz veins. No relationship between the iron-content in andalusite and the different stages of transformation from andalusite to kyanite could be established.

     

Ecological-geochemical assessment of the state of the Volga source of water supply to Moscow

Long-term observational data (1992?C2009) on heavy metal (Cu, Zn, Pb, Cr, Ni, V, Mo, Co, Fe, and Mn) content of different links in the Ivankovo Reservoir ecosystem are used to consider the regularities in the distribution and behavior of heavy metals in the system anthropogenic pollution sources-reservoir and its drainage area, thus enabling the assessment of the pollution level of the Volga Source of water supply to Moscow.     

PEDOGENESIS IN LATE PREHISTORIC INDIAN MOUNDS,UPPER MISSISSIPPI VALLEY

Inceptisols are developed on silt loam, loam, and sandy loam Indian mounds at the Keller Mound Group and Bluff Top Mound in northeastern Iowa. The mounds date to the Allamakee Phase of the Late Woodland Period (ca. 1650–1250 B.P.) and are built with fill obtained from the A, E, and upper B horizons of pre-existing soils (Alfisols). Differences in the morphologic and chemical characteristics of soils on different mounds are attributed to textural differences of the mounds' fill. Coarse-textured mound fill is pedogenically altered at a faster rate than fine-textured fill, but total carbon percentage of the A horizon attains a steady state faster in fine-textured mound fill. Total phosphorus content is used to determine from which horizons of pre-existing soils the specific layers of mound fill originated. Rates and pathways of pedogenesis in mound fill may not provide good analogues for the early stages of soil development in materials that have not undergone previous weathering and subsequent modification by humans. Nevertheless, mound soils are useful benchmarks for some pedologic studies since they provide time lines for evaluating minimum rates for development of argillic and albic horizons, as well as attainment of the Alfisol order.     

Principles of tabling

The mechanism of concentration on the shaking table is discussed and a fresh attempt is made to obtain the theoretical model describing the velocity of a fluid in depth and time when in contact with a symmetrically reciprocating surface.The significance of the many design and operational variables and their interrelationships are examined. The various areas where the shaking table plays its role are then considered.The relevant features of micropanner, superpanner and the subsequent macropanner and pulsepanner are also treated since they all, like the shaking table, have the differential motion in common.     

Influence of wind upon water quality in Liverpool Bay

Comprehensive distribution patterns of physical and chemical characteristics have been obtained from a series of cruises in Liverpool Bay. The marked feature of these distributions was their temporal variability, suggesting that the surface residual circulation is also temporally variable. The influence of wind stress upon the circulation pattern and hence water quality of this sea area is illustrated.     

The role of prior model calibration on predictions with ensemble Kalman filter

This paper, based on a real world case study (Limmat aquifer, Switzerland), compares inverse groundwater flow models calibrated with specified numbers of monitoring head locations. These models are updated in real time with the ensemble Kalman filter (EnKF) and the prediction improvement is assessed in relation to the amount of monitoring locations used for calibration and updating. The prediction errors of the models calibrated in transient state are smaller if the amount of monitoring locations used for the calibration is larger. For highly dynamic groundwater flow systems a transient calibration is recommended as a model calibrated in steady state can lead to worse results than a noncalibrated model with a well-chosen uniform conductivity. The model predictions can be improved further with the assimilation of new measurement data from on-line sensors with the EnKF. Within all the studied models the reduction of 1-day hydraulic head prediction error (in terms of mean absolute error [MAE]) with EnKF lies between 31% (assimilation of head data from 5 locations) and 72% (assimilation of head data from 85 locations). The largest prediction improvements are expected for models that were calibrated with only a limited amount of historical information. It is worthwhile to update the model even with few monitoring locations as it seems that the error reduction with EnKF decreases exponentially with the amount of monitoring locations used. These results prove the feasibility of data assimilation with EnKF also for a real world case and show that improved predictions of groundwater levels can be obtained.     

Deformability properties of model granular soils under true triaxial compression conditions

The study presents a review of modifications to the design of true triaxial test apparatuses and described a new mixed boundary apparatus to study the stress-strain behavior of coarse-grained soil under true triaxial compression conditions. It was shown that the deviatoric component plays an important role in affecting the volumetric compression of coarse-grained soil. The study analyzed the influence of different stress-strain characteristics on the development of lateral earth pressure.     

Biogenic origin of coastal honeycomb weathering

Honeycomb weathering occurs in two environments in Late Cretaceous and Eocene sandstone outcrops along the coastlines of south‐west Oregon and north‐west Washington, USA, and south‐west British Columbia, Canada. At these sites honeycomb weathering is found on subhorizontal rock surfaces in the intertidal zone, and on steep faces in the salt spray zone above the mean high tide level. In both environments, cavity development is initiated by salt weathering. In the intertidal zone, cavity shapes and sizes are primarily controlled by wetting/drying cycles, and the rate of development greatly diminishes when cavities reach a critical size where the amount of seawater left by receding tides is so great that evaporation no longer produces saturated solutions. Encrustations of algae or barnacles may also inhibit cavity enlargement. In the supratidal spray zone, honeycomb weathering results from a dynamic balance between the corrosive action of salt and the protective effects of endolithic microbes. Subtle environmental shifts may cause honeycomb cavity patterns to continue to develop, to become stable, or to coalesce to produce a barren surface. Cavity patterns produced by complex interactions between inorganic processes and biologic activity provide a geological model of ‘self‐organization’. Surface hardening is not a factor in honeycomb formation at these study sites. Salt weathering in coastal environments is an intermittently active process that requires particular wind and tidal conditions to provide a supply of salt water, and temperature and humidity conditions that cause evaporation. Under these conditions, salt residues may be detectable in honeycomb‐weathered rock, but absent at other times. Honeycomb weathering can form in only a few decades, but erosion rates are retarded in areas of the rock that contain cavity patterns relative to adjacent non‐honeycombed surfaces. Copyright © 2010 John Wiley & Sons, Ltd.     

Modelling changes in the epidemic range of Southern Pine Beetle using temperature and objective moisture indicators

Summary This report details as statistical model that relates changes in areal coverage of the Southern Pine Beetle (Dendroctonus frontalis Zimm.) to a multivariate combination of temperature and moisture status indices. It is applicable to larger geographic areas than our previous work (Michaels 1984). Performance in a true test (predictive) mode detected the algebraic sign of major coverage changes in a highly significant fashion. The results are purely correlative, rather than causative.This report describes a test-proven tool that can be used by planners to determine whether coverage will change, based upon easily accessed climatic data. An example of its application is provided.

---

Zusammenfassung Diese Untersuchung führt ein statistisches Modell aus, welches das flächenmäßige Auftreten vonDendroctonus frontalis Zimm. mit einer Kombination von Temperaturund Feuchteverhältnisindikatoren in Verbindung bringt. Es kann für größere Gebiete verwendet werden als ein früher vorgestelltes (Michaels 1984). Die Anwendung zur Vorhersage zeigte in einem Test gute Übereinstimmung mit der tatsächlich aufgetretenen Richtung der Veränderung in der Verbreitung des Käfers. Die Ergebnisse zeigen Korrelationen, keine Kausalitäten auf.Es wird also ein Werkzeug für den Planer vorgestellt, mit dem die Verbreitungsänderung mit Hilfe leicht zugänglicher klimatologischer Daten bestimmt werden kann. Ein Anwendungsbeispiel wird näher ausgeführt.

---

---

With 5 Figures