Analysis of subsurface mound spring connectivity in shale of the western margin of the Great Artesian Basin, South Australia

Mound springs provide the primary discharge mechanism for waters of the western margin of the Great Artesian Basin (GAB), Australia. Though these springs are an important resource in an arid environment, their hydraulics as they discharge from shale are poorly defined. The springs can include extensive spring tails (groundwater-dependent wetlands) and hundreds of springs in a given spring complex. Electrical resistivity imaging (ERI) was used to evaluate spring subsurface hydraulic-connectivity characteristics at three spring complexes discharging through the Bulldog Shale. The results demonstrate that fresher GAB water appears as resistors in the subsurface at these sites, which are characterized by high-salinity conditions in the shallow subsurface. Using an empirical method developed for this work, the ERI data indicate that the spring complexes have multiple subsurface connections that are not always easily observed at the surface. The connections are focused along structural deformation in the shale allowing fluids to migrate through the confining unit. The ERI data suggest the carbonate deposits that the springs generate are deposited on top of the confining unit, not precipitated in the conduit. The data also suggest that spring-tail ecosystems are not the result of a single discharge point, but include secondary discharge points along the tail.     

Taxila LBM: a parallel,modular lattice Boltzmann framework for simulating pore-scale flow in porous media

The lattice Boltzmann method is a popular tool for pore-scale simulation of flow. This is likely due to the ease of including complex geometries such as porous media and representing multiphase and multifluid flows. Many advancements, including multiple relaxation times, increased isotropy, and others have improved the accuracy and physical fidelity of the method. Additionally, the lattice Bolzmann method is computationally very efficient, thanks to the explicit nature of the algorithm and relatively large amount of local work. The combination of many algorithmic options and efficiency means that a software framework enabling the usage and comparison of these advancements on computers from laptops to large clusters has much to offer. In this paper, we introduce Taxila LBM, an open-source software framework for lattice Boltzmann simulations. We discuss the design of the framework and lay out the features available, including both methods in the literature and a few new enhancements which generalize methods to complex geometries. We discuss the trade-off of accuracy and performance in various methods, noting how the Taxila LBM makes it easy to perform these comparisons for real problems. And finally, we demonstrate a few common applications in pore-scale simulation, including the characterization of permeability of a Berea sandstone and analysis of multifluid flow in heterogenous micromodels.     

A New Appraisal of Sri Lankan BB Zircon as a Reference Material for LA‐ICP‐MS U‐Pb Geochronology and Lu‐Hf Isotope Tracing

A potential zircon reference material (BB zircon) for laser ablation‐inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS) U‐Pb geochronology and Hf isotope geochemistry is described. A batch of twenty zircon megacrysts (0.5–1.5 cm³) from Sri Lanka was studied. Within‐grain rare earth element (REE) compositions are largely homogeneous, albeit with some variation seen between fractured and homogeneous domains. Excluding fractured cathodoluminescence bright domains, the variation in U content for all analysed crystals ranged from 227 to 368 μg g^?1 and the average Th/U ratios were between 0.20 and 0.47. The Hf isotope composition (0.56–0.84 g/100 g Hf) is homogeneous within and between the grains – mean ¹⁷⁶Hf/¹⁷⁷Hf of 0.281674 ± 0.000018 (2s). The calculated alpha dose of 0.59 × 10¹⁸ g^?1 for a number of BB grains falls within the trend of previously studied, untreated zircon samples from Sri Lanka. Aliquots of the same crystal (analysed by ID‐TIMS in four different laboratories) gave consistent U‐Pb ages with excellent measurement reproducibility (0.1–0.4% RSD). Interlaboratory assessment (by LA‐ICP‐MS) from individual crystals returned results that are within uncertainty equivalent to the TIMS ages. Finally, we report on within‐ and between‐grain homogeneity of the oxygen isotope systematic of four BB crystals (13.16‰ VSMOW).     

天山乌鲁木齐河融雪和河川径流的水文化学过程

研究结果表明, 含 Ｃａ Ｃ Ｏ３矿物的溶解作用在乌鲁木齐河源区居主导地位 尽管融雪径流的 “离子脉冲”作用可以释放峰值强度达 ３～４ 倍的 Ｓ Ｏ２４ 和 Ｎ Ｏ－３ 流, 并且引起了总控断面河川径流与之相像的“离子脉冲”现象,但河川径流仍然呈现弱碱性;河源区强烈的含 Ｓ矿物的氧化溶解作用,产生大量的 Ｈ＋ ,被含 Ｃａ Ｃ Ｏ３矿物的溶解作用所缓冲, 未引起河川径流的酸化乌鲁木齐河以冰川站为界, 以上地区的水文化学过程为矿物的侵蚀－ 溶解过程,以下则发生部分矿物的沉淀,如 Ｃａ Ｃ Ｏ３的沉淀 Ｃａ Ｃ Ｏ３ 的沉淀作用一定程度上又增强了河流的酸缓冲力      

On the dynamics of oceanographic surface moorings

An analytical model is proposed for predicting the dynamics of instrumented oceanographic surface moorings made up of a combination of wire rope and compliant synthetic rope. The model simplifies the problem by treating only the vertical motion of the buoy and the longitudinal motion of the mooring line and attached instruments. It is demonstrated using full-scale experimental data and numerical simulations, that the simplified model captures all of the important dynamic effects and gives accurate predictions of the dynamic tension at the top of the mooring line. The model shows that the total mass and damping of the instruments and wire rope that make up the stiff upper half of the mooring are the major sources of the dynamic tension. Damping of the instruments becomes a significant factor in larger sea states, especially near the peak frequency of the wave spectrum. Elastic stretching of the wire and synthetic rope make up approximately 10% of the total response. This is based on a coefficient of friction equal to 0.003 which fits the experimental data best.     

The Ledsjö end moraine—a subaquatic push moraine composed of glaciomarine clay in central Sweden

During the Younger Dryas cold event, the Scandinavian ice sheet readvanced in southwest Sweden and formed the Middle Swedish end-moraine zone (MSEMZ). Recent highway construction near Skara has created an exposure through the prominent ridge at Ledsjö. Through sketching and measurement of structural information, we have documented the internal character of the Ledsjö moraine. The moraine consists predominantly of clay with numerous sand pods and lenses, which show undeformed, brittle deformed, or fluidized structures. Based on geomorphology and structural geology, it is clear the moraine was made during two advances. As ice advanced, proglacial marine clay was subglacially mobilized by the ice and extruded at the ice margin forming a ramp of debris-flow sediment. Contemporaneously, subglacial meltwater transported sand to the margin, where the meltwater became a buoyant plume, and sand was deposited near the ice margin by currents moving away from as well as toward the ice margin. These processes resulted in interbedded sand and clay. Continued advance of the ice margin deformed this package and further pushed the assemblage into a ridge form with gravity sliding of portions of the ridge. Prior to the second advance, sand was deposited on the proximal side of the initial ridge. During readvance, this sand was thrust faulted and intruded by mobilized clay. Up ice of the intruded sands, subglacial, extensional deformation created a complex shear zone of faulted sand and clay. The Ledsjö moraine represents a subaerial example of submarine push moraines like the submerged moraines recently documented in Svalbard.