基于卫星遥感数据的全球表层流场反演重构

利用2000~2008年的卫星高度计资料和QuikSCAT风场资料,反演了全球的海表的地转流和Ekman流,将两者合成后生成了0．5°×0．5°的逐周全球表层流产品。在计算Ekman流的时候,引入了权重函数,改进了Lagerloef方法中Ekman流在25°S和25°N上的不连续问题。分析表明：卫星资料反演的流产品能够反映出海表流场的特征,将其分别于TAO观测和SGUD流产品进行定量化的比较显示,所得流产品具有较高的反演精度和可信度,说明改进的方法是有效的。     

Thermal anomalies associated with shallow gas hydrates in the K-2 mud volcano, Lake Baikal

Thermal measurements and hydrate mapping in the vicinity of the K-2 mud volcano in Lake Baikal have revealed a particular type of association of thermal anomalies (29–121?mW?m^–2) near hydrate-forming layers. Detailed coring within K-2 showed that hydrates are restricted to two distinct zones at sub-bottom depths exceeding 70–300?cm. Temperature data from stations with hydrate recovery and degassing features all display low thermal gradients. Otherwise, the thermal gradients within the mud volcano are generally increased. These findings imply a more complicated thermal regime than often assumed for mud volcanoes, with important roles for both fluids and hydrates. The coexistence of neighbouring low and high thermal anomalies is interpreted to result from discharging and recharging fluid activity, rather than hydrate thermodynamics. It is suggested that hydrates play a key role in controlling the fluid circulation pattern at an early stage. At a later stage, the inflow of undersaturated lake water would favour the dissolution of structure I hydrates and the formation of structure II hydrates, the latter having been observed on top of structure I hydrates in the K-2 mud volcano.     

Methane fluxes in the southeastern Baltic Sea

New data from surveys of gas-bearing mud areas in the Gdansk Deep (southeastern Baltic Sea) were collected during four research cruises in 2009–2011. These revealed the presence of seven large pockmarks apart from the three already known, and enabled significant improvement of the existing digital map of gassy mud distribution. Based on geochemical sediment analyses, calculated diffusive methane fluxes from the upper (0–5?cm) seabed layer into near-bottom waters were highest—3.3?mmol/(m²?day)—in pockmark mud, contrasting strongly with the minimum value of 0.004?mmol/(m²?day) observed in typical, background mud. However, fluxes of less than 0.1?mmol/(m²?day) were observed in all sediment types, including pockmarks. In a newer attempt to roughly estimate budgets at a more regional scale, diffusive methane venting amounts to 280?×?10⁶?mmol/day for southeastern Baltic Sea muddy sediments. Elongated pockforms in the southern Gotland Deep, known since the end of the 1980s as pockmarks, had methane concentrations that were similar to those of gassy mud from the Gdansk Basin, and there was no geo-acoustic evidence of considerably increased gas levels.     

Mineral systems and the thermodynamics of selenites and selenates in the oxidation zone of sulfide ores – a review

Mineralogy and Petrology - Contemporary mineralogy and geochemistry are concerned with understanding and deciphering processes that occur near the surface of the Earth. These processes are...     

Automated Segmentation of Resistivity Image Logs Using Wavelet Transform

We describe a wavelet-transform-based method for automated segmentation of resistivity image logs that takes into account the apparent dip in the data and addresses the problem of discriminating lithofacies boundaries from noise and intrafacies variations. Our method can be applied to borehole measurements in general, but might have an advantage when applied to resistivity image logs as it addresses explicitly the large variability in facies segments recorded with a high-resolution multiple-sensor tool. We have developed an algorithm based on this method that might outperform other existing segmentation methods in the cases of low to moderate dip. We made a detailed comparison of the segmentation from our method with the one done by a geologist to delineate different lithofacies blocks in a well drilled in a deepwater depositional environment. Our results show considerable success rates in reproducing the geologically defined lithofacies boundaries, and the generality of our procedure suggests it could also be applied to other depositional environments.     

Reliable Procedure for Molecular Analysis of Airborne Microflora in Three Indoor Environments: An Office and Two Different Museum Contexts

Biological aerosols from air constitute a significant source of exposure to microorganisms in public places. Airborne microorganisms are involved in the development of certain respiratory symptoms, allergies, or infections among users and occupants. Various sampling instruments have commonly been used in aerobiology to collect bacteria and fungi suspended in the air. The objective of this study was to develop a reliable procedure for sampling in indoor public environments presenting different levels of occupancy, airborne bacteria and fungi to be subjected to molecular analysis (bacteria and fungi quantitative PCR, capillary electrophoresis single strand conformation polymorphism fingerprinting). Four different sampling devices were tested in situ in an office building (open‐plan type) and the sampling strategy chosen was tested in two museum contexts. In accordance with the drawbacks involved to our study (quantitative and qualitative aspects, cost, and overcrowding), cyclone device appeared to be most suitable. The results underline the effectiveness of this high‐volume aerosol sampling device for both qualitative and quantitative molecular analysis. Four in situ sampling collections were carried out in 1 day in the Louvre Museum to study quantitative and qualitative variations of airborne bacterial and fungal diversity. The quantitative results revealed a similar order of magnitude for the numbers of both bacteria and fungi. In the Louvre Museum, the samples yielded between 3.7 × 10⁴ and 4.1 × 10⁴ genome equivalent (GE) bacteria/m³ air and between 5.0 × 10⁴ and 5.9 × 10⁴ GE fungi/m³ air and in the Decorative Arts Museum between, 2.1 × 10⁴ and 2.5 × 10⁴ GE bacteria/m³ air and between 1.4 × 10⁴ and 1.7 × 10⁴ GE fungi/m³ air. The results also indicate that the dominant bacterial community displayed a stable structure over a short period of time whereas dominant eukaryotic airborne community appeared more variable.     

The Problem of Double Longitudes on Glavač’s Map

Abstract

Exploring large volumes of geospatial data is difficult. This paper presents an approach that combines visual and computational analysis to make this process easier. This approach is based on the effective application of computational algorithms, such as the Self-Organizing Map (SOM). These are used to uncover the structure, patterns, relationships and trends in the data, and for the creation of abstractions where conventional methods may be limited. In addition, graphical representations are applied to portray extracted patterns in a visual form that allows for better understanding of the derived structures and possible geographical processes, and should facilitate knowledge construction.     

Curie Point Depth Estimates and Correlation with Subduction in Mexico

We investigate the regional thermal structure of the crust in Mexico using Curie Point Depth (CPD) estimates. The top and bottom of the magnetized crust were calculated using the power-density spectra of the total magnetic field from the freely available ??Magnetic Anomaly Map of North America??. We applied this method to estimate the regional crustal thermal structure in overlapping square windows of 2°?×?2°. The CPD estimates range between 10 and 40?km and show several regions of relatively shallow and deep magnetic sources, with a general inverse correlation with measured heat flow. A deep CPD region (20?C30?km) is located in the fore-arc area where the subducting Cocos plate has a flat-slab geometry. This deep region is bound to the NW and SE by shallow CPD areas beneath the states of Michoacan (CPD?=?12?C16?km) and Oaxaca (CPD?=?~16?km), respectively. There is a good spatial correlation between this deep CPD area and two main fracture zones located on the incoming Cocos plate (Orozco and O??Gorman fracture zones), suggesting that subduction plays an important role in setting apart different CPD provinces along the Mexican coast. Another deep CPD (16?C32?km) area corresponds to the region where the Rivera plate subducts beneath Jalisco block. The Trans-Mexican Volcanic Belt is characterized by a decrease in Curie depths from west (16?C20?km) to east (10?C12?km). Finally, several deep CPD areas are situated in the back-arc region where old Mesozoic terrains are present. Our results suggest that the main control on the crust??s regional thermal structure in the fore-arc and volcanic arc regions is due to the subduction of the Cocos and Rivera plates beneath Mexico.