The aegean sea oil spill in the Galicia Coast (NW Spain). I. Distribution and fate of the crude oil and combustion products in subtidal sediments.

The spatial distribution and fate of petrogenic and pyrogenic hydrocarbons in coastal sediments following the Aegean Sea oil spill (Galicia, NW Spain) was investigated through a detailed study of chemical markers. Alkanes and acyclic isoprenoid hydrocarbons were degraded within six months of the accident, but triterpane and sterane distributions were still detectable and were useful in monitoring, respectively, the oil source and weathering. Aromatic steranes were also useful source indicators, and oil degradation was clear from the decrease of certain alkyl dibenzothiophene and phenanthrene isomers. The pyrogenic polycyclic aromatic hydrocarbons produced in the tanker wreck were found more persistent than the petrogenic ones. However, the presence of the oil in the sediments was recognized even one year after the accident and was found particularly preserved in the subsurface layers.     

Local co-operation, ethnic diversity and state territoriality – The case of Haparanda and Tornio on the Sweden – Finland border

The neighbouring towns of Haparanda and Tornio, separated only by a narrow strip of grass and wetland, are divided by the only inhabited land boundary between Finland and Sweden in the southern part of the Torne River. The population represents four different groups in relation to linguistic and cultural backgrounds. In the daily lives of the inhabitants, the state boundary is probably of less significance than linguistic, social and ‘ethnic’ differences. On the local government level there is a strong will to unite forces to make the total area a viable region in spite of its peripheral location, but state legislation makes co-ordination difficult. This may be seen as a necessity, but in the daily lives of the populations, the state boundary defines an area of unequal access, sometimes working in favour of and sometimes barring contacts and co-operation. The media consumption reflects a clear ‘national’ interest with a strong local bias. In their attitudes, Finnish speakers and bilinguals show a greater appreciation of ‘the other’ than unilingual Swedes. This may reflect the actual possibility space (reach) in the local area. This revised version was published online in July 2006 with corrections to the Cover Date.     

Grain-size-sensitive flow and shear-stress enhancement at the brittle–ductile transition of the continental crust

Localized shear zones along low-angle normal faults have been identified in regions of extension at the brittle-ductile transition of the continental crust. The possibility of the strain localizing at a depth of 10 km is interpreted here as a consequence of an increase in the equivalent shear stress applied to the flow of the lower crust. This enhancement of the flow stress is seen as a prerequisite for the triggering of brittle deformation mechanisms leading to strain localization. The lower crust rheology used to examine this stress increase is strain-rate, temperature and grain-size dependent, due to the coupling of dislocation and diffusion creep. The model structure proposed consists of a top layer, the upper crust, gliding rigidly above a bottom layer, the lower crust, which deforms in simple shear. During a short time interval (1400 years), the equivalent shear stress is found to increase by a factor of up to 3 (67 MPa for anorthite and 17 MPa for quartz). For anorthite, this stress could explain the activation of a Mohr-Coulomb failure with a friction coefficient of 0.2, which is reasonable at the depth of 10 km. Dislocation creep is activated during a rapid change in the prescribed velocity, whereas diffusion creep dominates if the velocity is held constant, highlighting the importance of grain-size sensitivity for lower crustal rheology.     

Sensitivity of a Greenland ice sheet model to ice flow and ablation parameters: consequences for the evolution through the last climatic cycle

Sensitivity experiments are conducted to test the influence of poorly known model parameters on the simulation of the Greenland ice sheet by means of a three dimensional numerical model including the mechanical and thermal processes within the ice. Two types of experiments are performed: steady-state climatic conditions and simulations over the last climatic cycle with a climatic forcing derived from the GRIP record. The experiments show that the maximum altitude of the ice sheet depends on the ice flow parameters (deformation and sliding law coefficients, geothermal flux) and that it is low when the ice flow is fast. On the other hand, the maximum altitude is not sensitive to the ablation strength and consequently during the climatic cycle it is driven by changes in accumulation rate. The ice sheet extension shows the opposite sensitivity: it is barely affected by ice flow velocity and the ice covered area is smaller for large ablation coefficients. For colder climates, when there is no ablation, the ice sheet extension depends on the sea level. An interesting result is that the variations with time of the altitude at the ice divide (Summit) do not depend on the parameters we tested. The present modelled ice sheets resulting from the climatic cycle experiments are compared with the present measured ice sheet in order to find the set of parameters that gives the best fit between modelled and measured geometry. It seems that, compared to the parameter set most commonly used, higher ablation rate coefficents must be used. Received: 19 September 1995 / Accepted: 30 May 1996     

Ice-sheet growth and high-latitudes sea-surface temperature

The response of the LLN 2-D climate model to the insolation and CO₂ forcings during the Eemian interglacial is compared to reconstructions obtained from deep-sea cores drilled in the Norwegian Sea and in the North Atlantic. Both reconstructions and modeling results show a decrease of sea-surface temperature (SST) in the higher latitudes (70–75 °N zonal belt for the model and the Norwegian Sea for the proxy records), associated with a more moderate cooling at lower latitudes (50–55 °N and North Atlantic), at the middle of isotopic substage 5e, several millenia before the beginning of continental ice-sheet growth. Such a comparison between the simulated SST and ice volume of the Northern Hemisphere has been extended to the whole last glacial-interglacial cycle. The influence of the insolation forcing on SST and the shortcomings of the model due to its zonal character are discussed. Received: 6 July 1995/Accepted: 19 December 1995     

Study of the air-sea interactions at the mesoscale: the SEMAPHORE experiment

The SEMAPHORE (Structure des Echanges Mer-Atmosphère, Propriétés des Hétérogénéités Océaniques: Recherche Expérimentale) experiment has been conducted from June to November 1993 in the Northeast Atlantic between the Azores and Madeira. It was centered on the study of the mesoscale ocean circulation and air-sea interactions. The experimental investigation was achieved at the mesoscale using moorings, floats, and ship hydrological survey, and at a smaller scale by one dedicated ship, two instrumented aircraft, and surface drifting buoys, for one and a half month in October-November (IOP: intense observing period). Observations from meteorological operational satellites as well as spaceborne microwave sensors were used in complement. The main studies undertaken concern the mesoscale ocean, the upper ocean, the atmospheric boundary layer, and the sea surface, and first results are presented for the various topics. From data analysis and model simulations, the main characteristics of the ocean circulation were deduced, showing the close relationship between the Azores front meander and the occurrence of Mediterranean water lenses (meddies), and the shift between the Azores current frontal signature at the surface and within the thermocline. Using drifting buoys and ship data in the upper ocean, the gap between the scales of the atmospheric forcing and the oceanic variability was made evident. A 2 °C decrease and a 40-m deepening of the mixed layer were measured within the IOP, associated with a heating loss of about 100 W m⁻². This evolution was shown to be strongly connected to the occurrence of storms at the beginning and the end of October. Above the surface, turbulent measurements from ship and aircraft were analyzed across the surface thermal front, showing a 30% difference in heat fluxes between both sides during a 4-day period, and the respective contributions of the wind and the surface temperature were evaluated. The classical momentum flux bulk parameterization was found to fail in low wind and unstable conditions. Finally, the sea surface was investigated using airborne and satellite radars and wave buoys. A wave model, operationally used, was found to get better results compared with radar and wave-buoy measurements, when initialized using an improved wind field, obtained by assimilating satellite and buoy wind data in a meteorological model. A detailed analysis of a 2-day period showed that the swell component, propagating from a far source area, is underestimated in the wave model. A data base has been created, containing all experimental measurements. It will allow us to pursue the interpretation of observations and to test model simulations in the ocean, at the surface and in the atmospheric boundary layer, and to investigate the ocean-atmosphere coupling at the local and mesoscales.     

Compression and coordination changes in pyroxenoids: an EXAFS study of MgGeO3 enstatite and CaGeO3 wollastonite

The evolution of the distortion of MgGeO₃ enstatite and CaGeO₃ wollastonite with increasing pressure, has been investigated using X-ray absorption spectroscopy (XAS) in a diamond anvil cell. At room temperature and low pressure (P<7 GPa), the compressibility of the GeO₄ tetrahedron is higher in MgGeO₃ enstatite (K _[GeO4]∼135 GPa) than in CaGeO₃ wollastonite (K _[GeO4]≥ 280 GPa). The compression mechanisms of the two compounds are different: the whole mineral compressibility of Ge-enstatite appears to be very homogeneous, in contrast to that of Ge-wollastonite which exhibits an inhomogeneous tretrahedral compressibility. This result is consistent with the variation of the Debye-Waller factors of the two compounds with increasing pressure. At higher pressures, the coordination of germanium atoms in the two compounds gradually changes from fourfold to sixfold. For CaGeO₃ the coordination change starts at 7 GPa and is complete a 12 GPa, whereas it starts at about 8.5 GPa for MgGeO₃ and is not complete at 31 GPa. The progressive evolution of the measured Ge-O distances as well as the modification in the X-ray absorption near-edge structure indicate two coexisting different sites rather than a progressive site modification. The transformation is found to be partially reversible in CaGeO₃ wollastonite, whereas it is totally reversible in MgGeO₃ enstatite.     

Assessment of loess as parent material for agroecological potential

Due to its physical and chemical properties, areas with a loess mantle of proper thickness favour arable farming. Loess as a parent material promotes the formation of soils of good structure, nutrient supply and water budget. The ongoing land evaluation project places particular emphasis on the consideration of parent material in its scoring system as soil and climatic parameters are assessed in conjunction with the grain size composition of subsurface material and soil texture.A test area most suitable for the presentation of the method seems to be a sandy alluvial fan with loess mantle and this circumstance allows the contrasting of the agroecological potentials of soils developed on the two parent materials of different nature.The favourable water storage properties of loess make this deposit particularly valuable under the conditions of climatic aridification. The geographical information system applied here is capable of simulating the agroecological potential changes caused by reduced precipitation, increased evaporation and dropping groundwater levels.The research for this paper was carried out as part of the MEDALUS II (Mediterranean Desertification and Land Use) collaborative research project. MEDALUS II was funded by the EC under its Environment Progamme, contract no. EV5V 0128/0166. A grant was also provided by the OTKA (Hungarian National Science Foundation), project no 1278. The support is gratefully acknowledged.     

The role of principles and methods in loess-paleosol investigations

In the process of loessification, the development of loess fabric, the role of zonal, regional and partly of local environmental factors is regarded decisive. In the loess sequences various genetic types of loess pockets and paleosols occur and reflect different climatic and paleogeographical conditions.As a consequence, even within a single profile the colour, grain size and mineral composition, CaCO₃ content, degree of weathering and fabric of loess may vary. Zonal, regional or even local variations in such loess properties may equally derive from syngenetic or postgenetic processes. For similar reasons, spatially and temporally different forms, types and subtypes of paleosol also developed.This way, loess and soil formation resulted in various spatial types in the same glacial, interstadial or interglacial phase in the various geographical zones and regions. Although there exist major loess regions where the interglacial soils (eg brown forest soils) are markedly distinct from interstadial steppe soils or from other types of humic soils, continental loess areas can also be observed where the paleosols developed under interglacial and interstadial conditions (eg steppe or forest steppe soils) cannot be referred into different genetic types. In such cases the changes in paleoenvironments are difficult and uncertain to reconstruct.The interregional correlation of paleosols is occasionally hindered by the various terminologies applied to denote them. In addition, there are uncertainties concerning the dating and identification of paleoenvironments of polygenetic soils and of soil complexes consisting of paleosol units: how many soil formation phases they represent and how long erosional gaps can be reckoned with between these phases.     

Long-term change in precipitation in southern Italy

Summary Annual average precipitation values obtained at 765 Italian raingauge stations south of the Rome parallel and in the Italian Isles, are analyzed. The analysis is extended over 18 years and marked variations in precipitation with the Zürich annual relative sunspot numbers are found. It is found furthermore that the magnitude of change appears to depend also on the average altitude of the 5 categories of stations considered.

---

Riassunto In questo articolo viene fatta un'analisi sulle variazioni delle precipitazioni medie annue in base ai dati forniti da 765 stazioni pluviometriche dell'Italia meridionale, Sicilia e Sardegna, negli anni dal 1926 al 1943 incluso. Tali variazioni sembrano essere legate al numero medio annuo di macchie solari e dipendono anche dall'altezza delle stazioni.

---

---

Contribution of the Centro Nucleazione Aerosoli of the National Research Council of Italy; Via Vettore 4 (Monte Sacro)