Synergetic efficiency of Lidar and WorldView-2 for 3D urban cartography in Northeast Mexico

Three-dimensional urban cartography is needed for city changes’ assessment. The variety of studies using 3D calculations of urban elements grows each year. Building and vegetation volumes are necessary to assess and understand spatio-temporal urban changeable environments. However, there are technical questions as to which method can improve 3D urban cartographic accuracy. The innovative part of this current study is the creation of a six-band hybrid obtained from LIDAR and WorldView2 synergy. Two different enhancement algorithms demonstrated the most important spectral features for the urban development and vegetation classes. Results indicated an improvement in accuracy by up to 21.3%, according to the Kappa coefficient. Both infra-red band and intensity band were the most significant, according to the principal components analysis. The synergy delimited classes and polygons, as well as the direct display of information regarding heights of elements and improving the extraction of roads, buildings and vegetation classes.     

Experimental investigation of water impact on axisymmetric bodies

The results of an elaborate experimental investigation on bottom slamming of axisymmetric objects are presented. Drop tests have been performed on a hemisphere and two conical shapes with different deadrise angles. The test setup is designed so as to prevent small rotations of the test objects which cause scatter in the measurement data. The pressure distribution and evolution as well as the body motion parameters are measured during impact. By means of a high speed camera the water uprise is visualized and the wetting factor is determined for the cones. The results are compared with a three-dimensional asymptotic theory for axisymmetric rigid bodies with constant entry velocity. The ratio between the registered peak pressures and the asymptotic theory are in accordance with comparable experiments in the literature. The asymptotic theory, however, is found to be quite conservative, since the measured peak pressure levels appear to be approximately 50% to 75% of the theoretical levels.     

Sunken wood habitat for thiotrophic symbiosis in mangrove swamps

Large organic falls to the benthic environment, such as dead wood or whale bones, harbour organisms relying on sulfide-oxidizing symbionts. Nothing is known however, concerning sulfide enrichment at the wood surface and its relation to wood colonization by sulfide-oxidizing symbiotic organisms.In this study we combined in situ hydrogen sulfide and pH measurements on sunken wood, with associated fauna microscopy analyses in a tropical mangrove swamp. This shallow environment is known to harbour thiotrophic symbioses and is also abundantly supplied with sunken wood. A significant sulfide enrichment at the wood surface was revealed. A 72 h sequence of measurements emphasized the wide fluctuation of sulfide levels (0.1–>100 μM) over time with both a tidal influence and rapid fluctuations. Protozoans observed on the wood surface were similar to Zoothamnium niveum and to vorticellids. Our SEM observations revealed their association with ectosymbiotic bacteria, which are likely to be sulfide-oxidizers. These results support the idea that sunken wood surfaces constitute an environment suitable for sulfide-oxidizing symbioses.     

Recursive algorithms for the computation of the potential harmonic coefficients of a constant density polyhedron

The gravitational potential of a constant density general polyhedron can be expressed both in terms of a closed analytical expression and as a series expansion involving the corresponding spherical harmonic coefficients. The latter can be obtained from two independent algorithms, which differ not only in their algorithmic architecture but in their efficiency and overall performance, especially when computing the coefficients of higher degree and order. In the present paper a comparative study of all these three approaches is carried out focusing on the numerical implementation of the recursive relations appearing in the two algorithms for the computation of the polyhedral potential harmonic coefficients. The performed numerical investigations show that the linear algorithm proposed by Jamet and Thomas (Proceedings of the second international GOCE user workshop, ‘GOCE, The Geoid and Oceanography’, ESA-ESRIN, Frascati, Italy, 8–10 March 2004, ESA SP-569, 2004), but so far not implemented, achieves a reasonable accuracy at a computational expense that opens to practical applications, for instance in the field of satellite gravimetry/gradiometry interpretation. The convergence behavior of the linear recursion algorithm is studied thoroughly and a computational procedure is proposed that enables the stable computation of potential harmonic coefficients up to degree 60 when referring to an arbitrarily shaped polyhedral body.     

Full-waveform topographic lidar: State-of-the-art

Airborne laser scanning (ALS) is an active remote sensing technique providing range data as 3D point clouds. This paper aims at presenting a survey of the literature related to such techniques, with emphasis on the new sensors called full-waveform lidar systems. Indeed, an emitted laser pulse interacts with complex natural and man-made objects leading to a temporal distortion of the returned energy profile. The new technology of full-waveform laser scanning systems permits one to digitize the complete waveform of each backscattered pulse. Full-waveform lidar data give more control to an end user in the interpretation process of the physical measurement and provide additional information about the structure and the physical backscattering characteristics of the illuminated surfaces. In this paper, the theoretical principles of full-waveform airborne laser scanning are first described. Afterwards, a review of the main sensors as well as signal processing techniques are presented. We then discuss the interpretation of full-waveform measures with special interest on vegetated and urban areas.     

Diagnosis of trace metal contamination in sediments: the example of Ensenada and El Sauzal, two harbors in Baja California, Mexico

Total metal concentrations in sediments from within Ensenada and El Sauzal Harbors are generally higher than at the mouths. Grain-size analyses suggested that this enrichment could be due to the presence of fine-grained sediments in the inner part of the harbors rather than to anthropogenic perturbations. The (Me/Al)(sample) ratios for Pb, Co, Ni and Fe were significantly higher for Ensenada Harbor relative to El Sauzal Harbor, whereas the ratios for Cd, Mn, Zn and Cu were statistically equivalent for both harbors. Calculated enrichment factors [EF(Me)=(Me/Al)(sample)/(Me/Al)(shale)] indicated that the metals showing slight enrichment were those associated with anthropogenic contamination (Pb, Zn), or probably related to primary productivity in the water column (Cd, Co). The levels of most of the metals were not greatly enriched, a consideration that is of the utmost importance when contamination issues are at stake.     

Evidence for the 8,200 a <Emphasis Type="SmallCaps">b</Emphasis>.<Emphasis Type="SmallCaps">p</Emphasis>. cooling event in the middle Okinawa Trough

Based on new and existing data on oxygen isotopes, alkenone-surface seawater temperature trends, planktonic foraminifers, lithology, and clay mineral composition of piston cores, a distinct cooling event has been identified around 8,200 cal a b.p. in the middle Okinawa Trough, northwest Pacific. This corresponds to the 8,200 a b.p. cooling event recorded in many places of the Northern Hemisphere. During this event, the local temperature decreased by 1°C, and the δ¹⁸O value increased by 0.6‰. A strengthened Asian winter monsoon is the most probable cause for this event, which thus adds further credibility to the contention that we are dealing here with a global phenomenon.     

Processing of high-frequency multibeam echo sounder data for seafloor characterization

Processing simultaneous bathymetry and backscatter data, multibeam echosounders (MBESs) show promising abilities for remote seafloor characterization. High-frequency MBESs provide a good horizontal resolution, making it possible to distinguish fine details at the water-seafloor interface. However, in order to accurately measure the seafloor influence on the backscattered energy, the recorded sonar data must first be processed and cleared of various artifacts generated by the sonar system itself. Such a preprocessing correction procedure along with the assessment of its validity limits is presented and applied to a 95-kHz MBES (Simrad EM 1000) data set. Beam pattern effects, uneven array sensitivities, and inaccurate normalization of the ensonified area are removed to make possible further quantitative analysis of the corrected backscatter images. Unlike low-frequency data where the average backscattered energy proves to be the only relevant feature for discriminating the nature of the seafloor, high-frequency MBES backscatter images exhibit visible texture patterns. This additional information involves different statistical distributions of the backscattered amplitudes obtained from various seafloor types. Non-Rayleigh statistics such as K-distributions are shown to fit correctly the skewed distributions of experimental high-frequency data. Apart from the effect of the seafloor micro-roughness, a statistical model makes clear a correlation between the amplitude statistical distributions and the signal incidence angle made available by MBES bathymetric abilities. Moreover, the model enhances the effect of the first derivative of the seafloor backscattering strength upon statistical distributions near the nadir and at high incidence angles. The whole correction and analysis process is finally applied to a Simrad EM 1000 data set.     

Classifying GRB 170817A/GW170817 in a Fermi duration–hardness plane

GRB 170817A, associated with the LIGO-Virgo GW170817 neutron-star merger event, lacks the short duration and hard spectrum of a Short gamma-ray burst (GRB) expected from long-standing classification models. Correctly identifying the class to which this burst belongs requires comparison with other GRBs detected by the Fermi GBM. The aim of our analysis is to classify Fermi GRBs and to test whether or not GRB 170817A belongs—as suggested—to the Short GRB class. The Fermi GBM catalog provides a large database with many measured variables that can be used to explore gamma-ray burst classification. We use statistical techniques to look for clustering in a sample of 1298 gamma-ray bursts described by duration and spectral hardness. Classification of the detected bursts shows that GRB 170817A most likely belongs to the Intermediate, rather than the Short GRB class. We discuss this result in light of theoretical neutron-star merger models and existing GRB classification schemes. It appears that GRB classification schemes may not yet be linked to appropriate theoretical models, and that theoretical models may not yet adequately account for known GRB class properties. We conclude that GRB 170817A may not fit into a simple phenomenological classification scheme.     

Propagation of Leaky MHD Waves at Discontinuities with Tilted Magnetic Field

We investigate the characteristics of magneto-acoustic surface waves propagating at a single density interface, in the presence of an inclined magnetic field. For linear wave propagation, the dispersion relation is obtained and analytical solutions are derived for small inclination angle. The inclination of the field renders the frequency of the waves complex, where the imaginary part describes wave attenuation, due to lateral energy leakage.