Determination of Geopotential Differences between Local Vertical Datums and Realization of a World Height System

The methodology developed for connecting Local Vertical Datums (LVD) was applied to the Australian Height Datum (AHD) and the North American Vertical Datum (NAVD88). The geopotential values at AHD and NAVD88 were computed and the corresponding vertical offset of 974 mm with rms 51 mm was obtained between the zero reference surfaces defined by AHD and NAVD88. The solution is based on the four primary geodetic parameters, the GPS/levelling sites and the geopotential model EGM96. The Global Height System (or the Major Vertical Datum) can be defined by a geoidal geopotential value used in the solution as the reference value, or by the geopotential value of the LVD, e.g. NAVD88.     

HCl emissions at Soufrière Hills Volcano,Montserrat, West Indies,during a second phase of dome building: November 1999 to October 2000

HCl:SO₂ mass ratios measured by open path Fourier transform spectroscopy (OP-FTIR) in the volcanic plume at Soufrière Hills Volcano, Montserrat, are presented for the second phase of dome building between November 1999 and November 2000. HCl:SO₂ mass ratios of greater than 1 and HCl emission rates of greater than 400 t day^–1 characterise periods of dome building for this volcano. The data suggest that chlorine partitions into a fluid phase as the magma decompresses and exsolves water during ascent. This is substantiated by a correlation between chlorine and water content in the melt (derived from the geochemical analysis of plagioclase melt inclusion and matrix glasses from phase I and II of dome growth). The matrix glass from the November 1999 and March 2000 domes indicate an open system degassing regime with a fluid-melt partition coefficient for chlorine of the order of 250–300. September 1997 glasses have higher chlorine contents and may indicate a switch to closed system degassing prior to explosive activity in September and October 1997. The OP-FTIR HCl time series suggests that HCl emission rate is strongly related to changes in eruption rate and we infer an emission rate of over 13.5 kt day^–1 HCl during a period of high extrusion rate in September 2000. A calculation of the HCl emission rate expected for varying extrusion rates from the open-system degassing model suggests a HCl emission rate of the order of 1–4 kt day^–1 is indicative of an extrusion rate of between 2 and 8 m³ s^–1. Monitoring of HCl at Soufrière Hills Volcano provide a proxy for extrusion rate, with changes in ratio between HCl and SO₂ occurring rapidly in the plume. Order of magnitude changes occur in HCl emission rates over the time-scale of hours to days, making these changes easy to detect during the day-to-day monitoring of the volcano. Mean water emission rates are calculated to range from 9–24 kt day^–1 during dome building activity, calculated from the predicted mass ratio of H₂O:HCl in the fluid at the surface and FTIR-derived HCl emission rates.     

Comparative risk assessment of permethrin, chlorothalonil, and diuron to coastal aquatic species

The precise application of risk assessment can lead to different conclusions about risk depending on how species are grouped in the assessment. We compared the use of different risk assessment methods for three different classes of pesticide, the herbicide diuron, the fungicide chlorothalonil, and the insecticide permethrin for marine and estuarine species. Permethrin was the most toxic pesticide to marine and estuarine crustaceans. Diuron was the most toxic pesticide to algae, and chlorothalonil was most toxic to early life stages of molluscs and other invertebrates. Toxicity data (96 h LC50/EC50 values) were analyzed using a probability distribution on the ranked toxicity values and 10th centile values were calculated based on different groups of species and for all species combined. Our results indicate that an assessment of risk based on smaller taxonomic groups can be informative, especially for pesticides of less specific modes of action such as chlorothalonil.     

Luminescence investigation of loess and tephra from Halfway House section, Central Alaska

Infrared stimulated luminescence (IRSL) properties of the Old Crow tephra and bracketing loess from the Halfway House site in Central Alaska are investigated in order to test newly developed techniques, including SAR and recently proposed fading corrections. Loess samples investigated show a standard growth of luminescence with regenerative dose while the tephra sample is less sensitive by an order of magnitude and saturates at lower dose. The growth curves obtained using multiple-aliquots regeneration (MAR) saturate at a higher value than those with the single-aliquot regeneration (SAR) protocol. Fading rate determinations for these samples are shown to be imprecise and no noticeable difference was observed between loess and tephra materials. Anomalous fading corrections using an average g value of 5% are applied to the natural test dose signal intensity using the dose rate correction (DRC) method. IRSL ages obtained for loess are in agreement with the expected age while the tephra age is lower than expected, suggesting the measured fading rate is underestimated for this material.     

Frasnian rugose and tabulate corals from the eastern Taurus (Kozan region,Turkey)

A section near the Kilgen Lake (Adana Province) has yielded a fauna of rugose and tabulate corals including Disphyllum cf. rugosum (Wedekind, 1922), D. cf. curtum Hill, 1954, Wapitiphyllum sp., Thamnopora sp., and Alveolites sp. This coral assemblage is consistent with the previous Frasnian age assigned to the limestones of the Gümü?ali Formation. The rather well-preserved material provides new data on the structure and microstructure of Disphyllum and allows to describe in Thamnopora unusual calicinal morphology (septal ridges, median teeth, and pseudopercula) as well as new structures linked to the lateral increase (basal low wall, apical cul-de-sac).     

Petroleum geoscience in Norden - exploration, production and organization

Offshore exploration in Norway and Denmark-in the North Sea, the Norwegian Sea and the Barents Sea-has involved drilling about 850 wildcat wells, resulting in about 300 oil and gas finds, of which 84 are fields with production. The recoverable resources of all these finds total about 65 billion barrels of oil equivalent. Almost all these hydrocarbons come from a Jurassic source and the main reservoirs and traps are Jurassic sandstones in fault blocks and Paleocene sandstones or Cretaceous chalks in gentle domes. The article describes four major fields-Ekofisk, Gullfaks, Ormen Lange and SnФhvitto illustrate some of the many challenges in developing and producing the hydrocarbons.
Elsewhere in Norden, there has been much less exploration. Drilling results have mostly been negative in mainland Sweden, onshore Denmark, onshore Svalbard and on- and offshore West Greenland. Minor oil finds have been made in Palaeozoic rocks in the Baltic Sea. The first wells have recently been drilled off the Faroe Islands, resulting in one discovery. No drilling has taken place on- or offshore East Greenland.
As a result of the hydrocarbon activities in Norway and Denmark, petroleum geoscience there has flourished, with 2000 geoscientists currently employed in the industry, many technical innovations made, a wealth of publically available information and a great increase in the understanding of the geology.     

SCALES: a large‐scale assessment model of soil erosion hazard in Basse‐Normandie (northern‐western France)

The cartography of erosion risk is mainly based on the development of models, which evaluate in a qualitative and quantitative manner the physical reproduction of the erosion processes (CORINE, EHU, INRA). These models are mainly semi‐quantitative but can be physically based and spatially distributed (the Pan‐European Soil Erosion Risk Assessment, PESERA). They are characterized by their simplicity and their applicability potential at large temporal and spatial scales. In developing our model SCALES (Spatialisation d'éChelle fine de l'ALéa Erosion des Sols/large‐scale assessment and mapping model of soil erosion hazard), we had in mind several objectives: (1) to map soil erosion at a regional scale with the guarantee of a large accuracy on the local level, (2) to envisage an applicability of the model in European oceanic areas, (3) to focus the erosion hazard estimation on the level of source areas (on‐site erosion), which are the agricultural parcels, (4) to take into account the weight of the temporality of agricultural practices (land‐use concept). Because of these objectives, the nature of variables, which characterize the erosion factors and because of its structure, SCALES differs from other models. Tested in Basse‐Normandie (Calvados 5500 km²) SCALES reveals a strong predisposition of the study area to the soil erosion which should require to be expressed in a wet year. Apart from an internal validation, we tried an intermediate one by comparing our results with those from INRA and PESERA. It appeared that these models under estimate medium erosion levels and differ in the spatial localization of areas with the highest erosion risks. SCALES underlines here the limitations in the use of pedo‐transfer functions and the interpolation of input data with a low resolution. One must not forget however that these models are mainly focused on an interregional comparative approach. Therefore the comparison of SCALES data with those of the INRA and PESERA models cannot result on a convincing validation of our model. For the moment the validation is based on the opinion of local experts, who agree with the qualitative indications delivered by our cartography. An external validation of SCALES is foreseen, which will be based on a thorough inventory of erosion signals in areas with different hazard levels. Copyright © 2010 John Wiley & Sons, Ltd.