Emission features in the solar corona after the perihelion passage of Comet 1979 XI

On the coronograph spectrophotographic records taken on 31.372 UT, August 1979, some faint emission features were found which can be ascribed to Siii and Niii. These emissions were obviously a transient phenomena which were detected only 10 hr after the supposed fall of Comet 1979 XI in the Sun's photosphere. It cannot be excluded that the appearance of Si and Ni lines was triggered by the evaporation of dust particles with a high abundance of heavier elements in the solar corona. This assumption is also supported by intensity distribution of the Fex coronal line around the Sun's limb. The maximum coincide with the position angle of the projected path of the comet.     

Solar system history as recorded in the saturnian ring structure

The paper is based on Holberg's analysis of the Voyager photographs in both reflected and transparent light, combined with occultation data of stars seen through the rings. Besides rapidly varying phenomena (spokes, braided ring, etc.), which according to Mendis are due to gravito-electromagnetic effects, the ring consists of abulk structure, a fine structure, and also ahyperfine structure, showing more than 10000 ringlets. The large number of ringlets can be explained by the Baxter-Thompson ‘negative diffusion’. This gives the ringlets a stability which makes it possible to interprete them as ‘fossils’, which originated at cosmogonic times. It is shown that thebulk structure can be explained by the combined ‘cosmogonic shadows’ of Mimas, the co-orbiting satellites, and the Shepherd satellites. This structure originated at the transition from the plasma phase to the planetesimal phase (which probably took place 4–5×10⁹ y ago). Further, Holberg has discovered that the shadows are not simple void region but exhibit a certain characteristic ‘signature’. This is not yet understood theoretically. Parts of thefine structure are explained by Holberg as resonances with the satellites. Parts are here interpreted as cosmogonic shadow effects. However, there are a number of ringlets which can neither be explained by cosmogonic nor by resonance effects. The most important conclusion is that an analysis of the ring data is likely to lead to areconstruction of the plasma-planetesimal transition with an accuracy of a few percent.     

Some consequences of meteoroid impacts on Saturn's rings

High-velocity impacts of interplanetary meteoroids on Saturn's rings are discussed. It is shown that the neutral gas emitted by impact vaporization may be responsible, to a large part, for the observed neutral ring atmosphere. Both the predicted neutral gas injection rate and the gas temperature (or kinetic energy) are compatible with the measurements (see Broadfoot, A. L., B. R. Sandel, D. E. Shemansky, J. B. Holberg, G. R. Smith, D. F. Strobel, J. C. McConnell, S. Kumar, D. M. Hunten, S. K. Atreya, T. M. Dohnahne, H. W. Moos, J. L. Bertaux, J. E. Blamont, R. B. Pomphrey, and S. Linik, Science212, 206–211, 1981). Heavy ejecta particles produce a particulate ring “halo”. The physical properties of this halo are calculated, and it appears to be identical with the tenous particle population discussed by Baum and Kreidl (1982). Erosion of Saturn's ring particles, the resulting mass balance, and regolith formation are estimated. This provides some constraints on surface properties and optical albedo.     

Detailed <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar dating of geologic events associated with the Mantos Blancos copper deposit,northern Chile

The ⁴⁰Ar/³⁹Ar geochronological method was applied to date magmatic and hydrothermal alteration events in the Mantos Blancos mining district in the Coastal Cordillera of northern Chile, allowing the distinction of two separate mineralization events. The Late Jurassic Mantos Blancos orebody, hosted in Jurassic volcanic rocks, is a magmatic-hydrothermal breccia-style Cu deposit. Two superimposed mineralization events have been recently proposed. The first event is accompanied by a phyllic hydrothermal alteration affecting a rhyolitic dome. The second mineralization event is related to the intrusion of bimodal stocks and sills inside the deposit. Because of the superposition of several magmatic and hydrothermal events, the obtained ⁴⁰Ar/³⁹Ar age data are complex; however, with a careful interpretation of the age spectra, it is possible to detect complex histories of successive emplacement, alteration, mineralization, and thermal resetting. The extrusion of Jurassic basic to intermediate volcanic rocks of the La Negra Formation is dated at 156.3 ± 1.4 Ma (2σ) using plagioclase from an andesitic lava flow. The first mineralization event and associated phyllic alteration affecting the rhyolitic dome occurred around 155–156 Ma. A younger bimodal intrusive event, supposed to be equivalent to the bimodal stock and sill system inside the deposit, is probably responsible for the second mineralization event dated at ca. 142 Ma. Other low-temperature alteration events have been dated on sericitized plagioclase at ca. 145–146, 125, and 101 Ma. This is the first time that two distinct mineralization events have been documented from radiometric data for a copper deposit in the metallogenic belt of the Coastal Cordillera of northern Chile. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Impact evaluation on groundwater of the infiltration of an urban wastewater geopurification system placed over a detrital aquifer in a semiarid region (Spain)

Over a period of 4 years and 4 months, the geopurification installations at Dehesas de Guadix (Granada, Spain) were monitored to determine the impact on soil and groundwater of the controlled discharge of urban wastewater, and also to identify the best indicators of the entry of the recharged water into the aquifer. The installations are located in an area where the climate is Mediterranean sub-arid, with an average precipitation of less than 287 mm/year, and a rate of evapotranspiration that is almost three times greater. The system was controlled by determining the balance of majority nutrients and boron in the soil and in the groundwater, both at the points affected directly by the wastewater discharge and at others. The quantity of mass discharged was relatively large (COD 14,656 g/m², NO₃ 85 g/m², NO₂ 4 g/m², NH₄ 2,425 g/m², PO₄ 1,143 g/m², K 1,531 g/m², B 63 g/m²). It was observed that the elimination of nutrients within the soil (COD 97.5%, PO₄ 94.4%, K 59.17%, N _total 18.8%, B 12.69%) was very efficient except for the nitrogen, which nevertheless did not reach the groundwater, as it was eliminated at deep levels of the unsaturated zone. Only 12.69% of the boron was removed, and appreciable, increasing amounts of this element did reach the groundwater. Unexpectedly, none of the majority nutrients behaved as a reliable indicator of the impact on groundwater; despite this, the boron and the bicarbonate did clearly reflect the arrival of the recharged water, and are proposed as the best indicators.     

Space–time distribution of ancient and active alluvial karst subsidence: examples from the central Ebro Basin,Spain

Space and time variations of alluvial karst subsidence in the central Ebro Basin are analysed in trenches (paleodolines), aerial photographs (historical dolines) and field surveys (present-day active dolines). The measured subsidence rates, as well as a comparison between densities of paleodolines computed in randomly selected scan-lines and density of active dolines computed in maps, suggest that present-day subsidence in favourable areas is more intense than that of Pleistocene times. According to diachronic maps drawn from (a) different aerial photographs taken after 1946 and (b) field surveys on deformations in urbanized areas, subsidence behaved as a nearly steady process while the whole area was used for agriculture. In contrast, rapid changes (through periods of several tens of years) have occurred in urbanized areas, in which dolines expand their boundaries through small marginal collapses, shifting sharply their sinking centres to neighbouring sites. These rapid changes do not have an equivalent in observed paleodolines.     

Assessment of sandstone deterioration at Ta Keo temple (Angkor): first results and future prospects

A first application of geomorphological methods to the assessment of sandstone deterioration at Angkor is presented. Damage diagnosis was carried out on the first eastern tier of the central pyramid of the 1,000 year-old Ta Keo temple. Methods combine field observations and measurements at 230 sampling points, high-resolution lasergrammetry and stereophotogrammetry on a 2-m² test zone, and SEM observations. The first results indicate that decay operates through a synergistic combination of weathering phenomena dominated by scaling and solution, and exhibits a high spatial variability. Percentages of deteriorated surfaces vary from 17.6 to 93.8%, and average stone recession values from 0.00 to 2.71 cm (minimum) and 0.34 to 5.49 cm (maximum). On the test-zone, stereophotogrammetry and 3D-mapping of the present and reconstructed initial states using lasergrammetry indicate that erosion scars up to 6 cm deep have formed since 1963. On the whole, the amount of deteriorated surfaces more than tripled between 1963 and 2008. The degree of implication of salts in stone decay remains unclear for most efflorescences are composed of calcite (CaCO3), with secondary importance of barite (BaSO4) and gypsum (CaSO₄·2H₂O). Future prospects aim to evaluate the impact on stone decay of the clearing out of the temple from the forest in the 1920s.     

Environmental risk evaluation of the use of mine spoils and treated sewage sludge in the ecological restoration of limestone quarries

The ecologic restoration criteria in areas degraded from extraction activities require making use of their mine spoils. These materials do not meet fertility conditions to guarantee restoration success and therefore, need the incorporation of organic amendments to obtain efficient substratum. Reducing the deficiencies in the organic material and restoration material nutrients with the contribution of treated sewage sludge is proposed in this work. This experiment was based on a controlled study using columns. The work was conducted with two mine spoils, both very rich in calcium carbonate. The first mineral, of poor quality, came from the formation of aggregates of crushed limestone (Z). The other residual material examined originated in limestone extraction, formed by the levels of interspersed non-limestone materials and the remains of stripped soils (D). Two treatments were undertaken (30,000 and 90,000 kg/ha of sewage sludge), in addition to a control treatment. The water contribution was carried out with a device that simulated either short-duration rain or a flooding irrigation system in order to cover the surface and then percolate through the soil. The collection of leached water took place 24 h after the applications. Different parameters of the leached water were determined, including pH, electrical conductivity, nitrate anions, ammonium, phosphates, sulphates and chlorides. The values obtained for each irrigation application are discussed, and the nitrate values obtained were very elevated.     

Sediment Trend Analysis through the variation of granulometric parameters: A review of theories and applications

Spatial variations in grain-size parameters (i.e. grain-size trends) contain information on sediment transport patterns. Analytical procedures have been proposed using the grain-size trend to determine net sediment transport pathways. In the first part of this study, the fundamentals of the theory are presented through methods for analysing 1D and 2D variations. The methods used are critically discussed, while pointing out some severe problems. So far, these methods suffer from limitations leading to serious interpretational errors, making it necessary to take account of two kinds of uncertainties. Inputs uncertainties are linked to the physical sediment properties as well as procedures of sampling and analysis. Model uncertainties are then discussed for each step of the grain-size trend analysis. The validity of Sediment Trend Analysis under natural conditions is tested against published field studies to determine the most appropriate variation trend to use in a specific environment. Proposals are given for each step of the procedure for optimal use of the method using a Quality Assurance (QA) approach. Further developments are proposed, such as integration into a Geographic Information System.