Assessment of alternative adsorption models and global sensitivity analysis to characterize hexavalent chromium loss from soil to surface runoff

We investigate our ability to assess transfer of hexavalent chromium, Cr(VI), from the soil to surface runoff by considering the effect of coupling diverse adsorption models with a two‐layer solute transfer model. Our analyses are grounded on a set of two experiments associated with soils characterized by diverse particle size distributions. Our study is motivated by the observation that Cr(VI) is receiving much attention for the assessment of environmental risks due to its high solubility, mobility, and toxicological significance. Adsorption of Cr(VI) is considered to be at equilibrium in the mixing layer under our experimental conditions. Four adsorption models, that is, the Langmuir, Freundlich, Temkin, and linear models, constitute our set of alternative (competing) mathematical formulations. Experimental results reveal that the soil samples characterized by the finest grain sizes are associated with the highest release of Cr(VI) to runoff. We compare the relative abilities of the four models to interpret experimental results through maximum likelihood model calibration and four model identification criteria (i.e., the Akaike information criteria [AIC and AIC_C] and the Bayesian and Kashyap information criteria). Our study results enable us to rank the tested models on the basis of a set of posterior weights assigned to each of them. A classical variance‐based global sensitivity analysis is then performed to assess the relative importance of the uncertain parameters associated with each of the models considered, within subregions of the parameter space. In this context, the modelling strategy resulting from coupling the Langmuir isotherm with a two‐layer solute transfer model is then evaluated as the most skilful for the overall interpretation of both sets of experiments. Our results document that (a) the depth of the mixing layer is the most influential factor for all models tested, with the exception of the Freundlich isotherm, and (b) the total sensitivity of the adsorption parameters varies in time, with a trend to increase as time progresses for all of the models. These results suggest that adsorption has a significant effect on the uncertainty associated with the release of Cr(VI) from the soil to the surface runoff component.     

Stream channel erosion in a rapidly urbanizing region of the US–Mexico border: documenting the importance of channel hardpoints with Structure‐from‐Motion photogrammetry

Urbanization can lead to accelerated stream channel erosion, especially in areas experiencing rapid population growth, unregulated urban development on erodible soils, and variable enforcement of environmental regulations. A combination of field surveys and Structure‐from‐Motion (SfM) photogrammetry techniques was used to document spatial patterns in stream channel geometry in a rapidly urbanizing watershed, Los Laureles Canyon (LLCW), in Tijuana, Mexico. Ground‐based SfM photogrammetry was used to map channel dimensions with 1 to 2 cm vertical mean error for four stream reaches (100–300 m long) that were highly variable and difficult to survey with a differential GPS. Regional channel geometry curves for LLCW had statistically larger slopes and intercepts compared with regional curves developed for comparable, undisturbed reference channels. Cross‐sectional areas of channels downstream of hardpoints, such as concrete reaches or culverts, were up to 64 times greater than reference channels, with enlargement persisting, in some cases, up to 230 m downstream. Percentage impervious cover was not a good predictor of channel enlargement. Proximity to upstream hardpoint, and lack of riparian and bank vegetation paired with highly erodible bed and bank materials may account for the instability of the highly enlarged and unstable cross‐sections. Channel erosion due to urbanization accounts for approximately 25–40% of the total sediment budget for the watershed, and channel erosion downstream of hardpoints accounts for one‐third of all channel erosion. Channels downstream of hardpoints should be stabilized to prevent increased inputs of sediment to the Tijuana Estuary and local hazards near the structures, especially in areas with urban settlements near the stream channel. Copyright © 2017 John Wiley & Sons, Ltd.     

In‐situ analysis of trace elements and Sr–Pb isotopes of K‐feldspars from Tongshankou Cu–Mo deposit,SE Hubei Province,China: Insights into early potassic alteration of the porphyry mineralization system

In the Tongshankou porphyry deposit (SE Hubei Province, South China), three types of K‐feldspars are recognized: (I) the phenocryst type in the porphyry that crystalized during the magmatic stage, (II) the megacryst type and (III) the vein type in the altered porphyry and orebody that was produced by hydrothermal fluids. A detailed in‐situ analysis of trace elements and Sr–Pb isotopes was carried out on K‐feldspars in an attempt to unravel their formation processes and to trace the element sources during potassic alteration. The Type III K‐feldspars show lower Sr contents and Sr‐isotope ratios but higher Pb contents and Pb‐isotope ratios than the Type I and II K‐feldspars, possibly reflecting a contribution from the country carbonate rocks with less radiogenic Sr but more radiogenic Pb sources, and indicate that the ore‐forming fluids and materials may have been partially derived from external sources such as the host sedimentary rocks during the early potassic alteration stage.     

Integrative taxonomic description of Plakina kanaky,a new polychromatic sponge species from New Caledonia (Porifera: Homoscleromorpha)

Four similar sponges of different colors, all unknown to science, were collected in submarine caves of New Caledonia. We aimed at determining whether the four chromotypes represented different species or phenotypic variations of a unique new species. We used an integrative taxonomic approach combining morphologic, molecular and metabolomic analyses. The main traits that define these specimens are a skeleton made of monolophose, trilophose and tetralophose calthrops only, high chemical diversity and a high abundance and diversity of prokaryotic symbionts. The symbiotic community includes two unique prokaryote morphotypes, which are described for the first time in Homoscleromorpha, and appeared to be vertically transmitted. Although several features slightly differ among chromotypes, the most parsimonious conclusion was to propose a single new species Plakina kanaky sp. nov. Our phylogenetic analysis indicated the paraphyly of the Plakina genus, with P. kanaky sp. nov. belonging to a clade that includes Plakina jani and Plakina trilopha. The present work demonstrates that integrative taxonomy should be used in order to revise the entire Plakinidae family and especially the non‐monophyletic genus Plakina.     

New Reference Materials and Assessment of Matrix Effects for SIMS Measurements of Oxygen Isotopes in Garnet

Accurate ion microprobe analysis of oxygen isotope ratios in garnet requires appropriate reference materials to correct for instrumental mass fractionation that partly depends on the garnet chemistry (matrix effect). The matrix effect correlated with grossular, spessartine and andradite components was characterised for the Cameca IMS 1280HR at the SwissSIMS laboratory based on sixteen reference garnet samples. The correlations fit a second‐degree polynomial with maximum bias of ca. 4‰, 2‰ and 8‰, respectively. While the grossular composition range 0–25% is adequately covered by available reference materials, there is a paucity of them for intermediate compositions. We characterise three new garnet reference materials GRS2, GRS‐JH2 and CAP02 with a grossular content of 88.3 ± 1.2% (2s), 83.3 ± 0.8% and 32.5 ± 3.0%, respectively. Their micro scale homogeneity in oxygen isotope composition was evaluated by multiple SIMS sessions. The reference δ¹⁸O value was determined by CO₂ laser fluorination (δ¹⁸O_LF). GRS2 has δ¹⁸O_LF = 8.01 ± 0.10‰ (2s) and repeatability within each SIMS session of 0.30–0.60‰ (2s), GRS‐JH2 has δ¹⁸O_LF = 18.70 ± 0.08‰ and repeatability of 0.24–0.42‰ and CAP02 has δ¹⁸O_LF = 4.64 ± 0.16‰ and repeatability of 0.40–0.46‰.     

Joint parameter estimation from magnetic resonance and vertical electric soundings using a multi‐objective genetic algorithm

Magnetic resonance sounding (MRS) has increasingly become an important method in hydrogeophysics because it allows for estimations of essential hydraulic properties such as porosity and hydraulic conductivity. A resistivity model is required for magnetic resonance sounding modelling and inversion. Therefore, joint interpretation or inversion is favourable to reduce the ambiguities that arise in separate magnetic resonance sounding and vertical electrical sounding (VES) inversions. A new method is suggested for the joint inversion of magnetic resonance sounding and vertical electrical sounding data. A one‐dimensional blocky model with varying layer thicknesses is used for the subsurface discretization. Instead of conventional derivative‐based inversion schemes that are strongly dependent on initial models, a global multi‐objective optimization scheme (a genetic algorithm [GA] in this case) is preferred to examine a set of possible solutions in a predefined search space. Multi‐objective joint optimization avoids the domination of one objective over the other without applying a weighting scheme. The outcome is a group of non‐dominated optimal solutions referred to as the Pareto‐optimal set. Tests conducted using synthetic data show that the multi‐objective joint optimization approximates the joint model parameters within the experimental error level and illustrates the range of trade‐off solutions, which is useful for understanding the consistency and conflicts between two models and objectives. Overall, the Levenberg‐Marquardt inversion of field data measured during a survey on a North Sea island presents similar solutions. However, the multi‐objective genetic algorithm method presents an efficient method for exploring the search space by producing a set of non‐dominated solutions. Borehole data were used to provide a verification of the inversion outcomes and indicate that the suggested genetic algorithm method is complementary for derivative‐based inversions.     

Pipe Service Age Effect on Chlorine Decay in Drinking‐Water Transmission and Distribution Systems

Maintaining acceptable quality of water transported in the transmission and distribution system requires the chlorination of water beyond the treatment plant. While flowing through pipes, the chlorine concentration decreases for different reasons. Reaction with the pipe material itself and the reaction with both the biofilm and tubercles formed on the pipe wall are known as pipe wall demand. This varies with pipe parameters. The aim of this paper was to assess the impact of the service age of pipes on the chlorine wall decay constant. One hundred and fifty three pipe sections of different sizes and four different pipe materials were collected and tested for their chlorine first‐order wall decay constants. The results showed that pipe service age was an important factor that must not be ignored. For the range of the 55 years of pipe service age used in this study, the change in the wall decay ranged from 8 to 531% of the corresponding values in the recently installed pipes. The effect of service age on the wall decay constants was most evident in steel pipes. Other important findings were reached.     

Seismic response of steel structures with seesaw systems using viscoelastic dampers

Vibration control systems are being used increasingly worldwide to provide enhanced seismic protection for new and retrofitted buildings. This paper presents a new vibration control system on the basis of a seesaw mechanism with viscoelastic dampers. The proposed vibration control system comprises three parts: brace, seesaw member, and viscoelastic dampers. In this system, only tensile force appears in bracing members. Consequently, the brace buckling problem is negligible, which enables the use of steel rods for bracing members. By introducing pre‐tension in rods, long steel rods are applicable as bracing between the seesaw members and the moment frame connections over some stories. Seesaw mechanisms can magnify the damper deformation according to the damper system configuration. In this paper, first, the magnification factor, that is, the ratio of the damper deformation to the story drift, is delivered, which includes the rod deformation. Results of a case study demonstrate that the magnification factor of the proposed system is greater than unity for some cases. Seismic response analysis is conducted for steel moment frames with the proposed vibration control system. Energy dissipation characteristics are examined using the time‐history response results of energy. The maximum story drift angle distributions and time‐history response results of displacement show that the proposed system can reduce the seismic response of the frames effectively. Copyright © 2012 John Wiley & Sons, Ltd.