Overview of groundwater sources and water-supply systems,and associated microbial pollution,in Finland,Norway and Iceland

The characteristics of groundwater systems and groundwater contamination in Finland, Norway and Iceland are presented, as they relate to outbreaks of disease. Disparities among the Nordic countries in the approach to providing safe drinking water from groundwater are discussed, and recommendations are given for the future. Groundwater recharge is typically high in autumn or winter months or after snowmelt in the coldest regions. Most inland aquifers are unconfined and therefore vulnerable to pollution, but they are often without much anthropogenic influence and the water quality is good. In coastal zones, previously emplaced marine sediments may confine and protect aquifers to some extent. However, the water quality in these aquifers is highly variable, as the coastal regions are also most influenced by agriculture, sea-water intrusion and urban settlements resulting in challenging conditions for water abstraction and supply. Groundwater is typically extracted from Quaternary deposits for small and medium municipalities, from bedrock for single households, and from surface water for the largest cities, except for Iceland, which relies almost entirely on groundwater for public supply. Managed aquifer recharge, with or without prior water treatment, is widely used in Finland to extend present groundwater resources. Especially at small utilities, groundwater is often supplied without treatment. Despite generally good water quality, microbial contamination has occurred, principally by norovirus and Campylobacter, with larger outbreaks resulting from sewage contamination, cross-connections into drinking water supplies, heavy rainfall events, and ingress of polluted surface water to groundwater.     

Long-term deforestation in NW Spain: linking the Holocene fire history to vegetation change and human activities

The Holocene fire regime is thought to have had a key role in deforestation and shrubland expansion in Galicia (NW Spain) but the contribution of past societies to vegetation burning remains poorly understood. This may be, in part, due to the fact that detailed fire records from areas in close proximity to archaeological sites are scarce. To fill this gap, we performed charcoal analysis in five colluvial soils from an archaeological area (Campo Lameiro) and compared the results to earlier studies from this area and palaeo-ecological literature from NW Spain. This analysis allowed for the reconstruction of the vegetation and fire dynamics in the area during the last ca 11 000 yrs. In the Early Holocene, Fabaceae and Betula sp. were dominant in the charcoal record. Quercus sp. started to replace these species around 10 000 cal BP, forming a deciduous forest that prevailed during the Holocene Thermal Maximum until ～5500 cal BP. Following that, several cycles of potentially fire-induced forest regression with subsequent incomplete recovery eventually led to the formation of an open landscape dominated by shrubs (Erica sp. and Fabaceae). Major episodes of forest regression were (1) ～5500–5000 cal BP, which marks the mid-Holocene cooling after the Holocene Thermal Maximum, but also the period during which agropastoral activities in NW Spain became widespread, and (2) ～2000–1500 cal BP, which corresponds roughly to the end of the Roman Warm Period and the transition from the Roman to the Germanic period. The low degree of chronological precision, which is inherent in fire history reconstructions from colluvial soils, made it impossible to distinguish climatic from human-induced fires. Nonetheless, the abundance of synanthropic pollen indicators (e.g. Plantago lanceolata and Urtica dioica) since at least ～6000 cal BP strongly suggests that humans used fire to generate and maintain pasture.     

Lava flow hazard at Nyiragongo volcano,D.R.C.

The 2002 eruption of Nyiragongo volcano constitutes the most outstanding case ever of lava flow in a big town. It also represents one of the very rare cases of direct casualties from lava flows, which had high velocities of up to tens of kilometer per hour. As in the 1977 eruption, which is the only other eccentric eruption of the volcano in more than 100 years, lava flows were emitted from several vents along a N–S system of fractures extending for more than 10 km, from which they propagated mostly towards Lake Kivu and Goma, a town of about 500,000 inhabitants. We assessed the lava flow hazard on the entire volcano and in the towns of Goma (D.R.C.) and Gisenyi (Rwanda) through numerical simulations of probable lava flow paths. Lava flow paths are computed based on the steepest descent principle, modified by stochastically perturbing the topography to take into account the capability of lava flows to override topographic obstacles, fill topographic depressions, and spread over the topography. Code calibration and the definition of the expected lava flow length and vent opening probability distributions were done based on the 1977 and 2002 eruptions. The final lava flow hazard map shows that the eastern sector of Goma devastated in 2002 represents the area of highest hazard on the flanks of the volcano. The second highest hazard sector in Goma is the area of propagation of the western lava flow in 2002. The town of Gisenyi is subject to moderate to high hazard due to its proximity to the alignment of fractures active in 1977 and 2002. In a companion paper (Chirico et al., Bull Volcanol, in this issue, 2008) we use numerical simulations to investigate the possibility of reducing lava flow hazard through the construction of protective barriers, and formulate a proposal for the future development of the town of Goma.     

The organisation of fish assemblages in the regulated Lima basin, Northern Portugal

In order to understand the structure of fish assemblages in the modified Lima basin (Northern Portugal), two distinct datasets concerning the presence and abundance of fish species were subjected to multivariate analysis. On the River Lima two types of flow modification are present within kilometres of one another: (a) a reduced and constant flow due to hypolimnetic release; and (b) an intense and irregular flow. A comparison of their influence on fish assemblages revealed a gradient of assemblage types from tributaries to main river sites. The latter were characterised by a strong dominance of cyprinids, particularly Iberian barbel (Barbus bocagei). The former harboured two kinds of fish assemblages: those closer to the river mouth were dominated by the cyprinids Iberian chub (Squalius carolitertii) and Iberian nase (Chondrostoma polylepis), which were also frequently present in the main river; while in those further upstream the predominant species was the brown trout (Salmo trutta). Although explanatory variables such as distance from source, altitude, substrate coarseness and width were the primary correlates of fish assemblage composition, dam construction and flow regulation also had a significant effect upon assemblage structure, particularly by: i) reducing the importance of migratory species; ii) constraining the presence of trout in the regulated segments; and iii) simplifying the community, especially in the case of the constant and reduced flow regime.     

Macroalgal survival in ballast water tanks

Despite a large amount of research into invasive species and their introductions, there have been no studies focused on macroalgal transport in ballast water. To address this, we collected replicate samples of ballast water from 12 ships in two Mediterranean harbours (Naples and Salerno). Filtered samples were kept in culture for a month at Mediterranean mean conditions (18 degrees C, 12:12h LD, 60micromol photons m(-2)s(-1)). Fifteen macroalgal taxa were cultured and differed according to the geographic origin of the ballast water. Most of the cultured algae were widely distributed species (e.g. Ulva spp. and Acinetospora-phase). However, Ulva ohnoi Hiraoka and Shimada, described from Japan, was hitherto unknown in the Mediterranean Sea. We show for the first time that ballast water can be an important vector for the transport of microscopic stages of macroalgae and that this can be a vector for the introduction of alien species.     

An amalgamated meter-thick sedimentary package enabled by the 2011 Tohoku tsunami in El Garrapatero,Galapagos Islands

Tsunamis and storms instigate sedimentological and geomorphological changes to the coastal system, both long-term and ephemeral. To accurately predict future coastal hazards, one must identify the records that are generated by the processes associated with these hazards and recognize what will be preserved. Using eyewitness accounts, photographs, and sedimentology, this study documents pre- and post-tsunami conditions and constrains the timing and process of depositional events during and following the 11 March 2011 Tohoku tsunami in the coastal system at El Garrapatero, Galapagos Islands. While the tsunami acted as both an erosional and depositional agent, the thick, fan-like sand sheet in El Garrapatero was primarily emplaced by overwash deposition during high tide from swell waves occurring between 19–25 March and 17–22 April 2011. The swell waves were only able to access the terrestrial coastal system via a channel carved by the 2011 Tohoku tsunami through the barrier sand dune. This combined deposit could result in an overestimation of the hazard if interpreted to be the result of only one event (either tsunami or wind-generated waves). An analogous sand layer, younger than 1390–1530 cal yr BP, may record a similar, prior event.     

Petrography and provenance of Laecanius Amphorae from Istria,northern Adriatic region,Croatia

Amphorae sherds from the Laecanius workshop of Roman Istria (10–5 B.C. and 78 A.D.), Croatia, were studied by integrating archaeological and geological techniques including fabric analysis, thin‐section petrography, X‐ray diffractometry (XRD), and heavy mineral analysis. The fabric of the sherds showed distinctive characteristics, permitting their classification and allocation into nine fabric groupss. Petrography revealed that quartz is the dominant clastic component, whereas carbonate is common as temper; XRD provided information on firing temperatures that ranged between 750 and 900°C. The sherds contain diverse heavy mineral suites with generally high epidote and garnet proportions; zircon is occasionally important. Garnet/epidote ratios and the presence of diagnostic species (pyroxene, hornblende) showed systematic variations that coincided with similar variations in fabric characteristics. Heavy mineral signatures of amphorae produced in other workshops proved essential in differentiating them from Laecanius sherds. A comparative heavy mineral analysis of terra rossa samples from the vicinity of the workshop indicated that terra rossa was the major source for the paste. Differences observed in the heavy mineral composition of the sherds and terra rossa were interpreted by the spatial heterogeneity of the latter and the mixing of the paste with sandy temper. Fresh Adriatic sponge spicules in the majority of Laecanius sherds and the temper‐derived, generally immature heavy mineral assemblages suggest that sandy deposits from the Adriatic were used for the clastic temper. © 2006 Wiley Periodicals, Inc.     

Youth empowerment and information and communication technologies: a case study of a remote Australian Aboriginal community

In spite of a ‘digital divide’, Aboriginal groups in Australia, as internationally, are increasingly using information and communication technologies (ICTs) to maintain their cultures, communicate, archive knowledge, empower their communities, develop skills and generate income. Each community uses the technologies differently in accordance with their particular needs and the opportunities available. The use of ICTs in Aboriginal youth empowerment is illustrated through a case study of an initiative undertaken by the Walkatjurra Cultural Centre in Leonora, remote Western Australia. A participatory process was used to engage the Centre’s young people and they were given individual assistance to develop their ICT related capacity. The community conceives this youth empowerment to be part of a broader youth participation process that will contribute to the Centre’s overall objectives.     

PM10 and heavy metal measurements in an industrial area of southern Italy

Atmospheric particulate concentrations and heavy metal content are measured from March to July 2001 at an industrial site located in a rural zone of the southern Italy. PM₁₀ samples are collected by a low-volume sampler and each sample is analysed by AAS techniques for its content of Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn. We measure also temperature, atmospheric pressure and relative humidity, and we collect anemometric data. The study purpose is the investigation of pollutant levels in an industrial area located in a rather unpolluted region and the characterization of the correlation structure among particulate concentrations, heavy metal content and local meteorological parameters. Data analysis is carried out by means of univariate and multivariate statistical methods. In the investigated period, the average value of PM₁₀ daily concentrations (24 μg Nm^− 3) does not exceed the national standard of 40 μg Nm^− 3 and only nine values are higher than the European daily limit value of 50 μg Nm^− 3. Particularly, the occurrence of two anomalous values (183 μg Nm^− 3 in 3 March and 94 μg Nm^− 3 in 22 June) seems to be related to no-local events as confirmed both by in situ data measured in the AQM network of Potenza city (about 10 km far from the study area) and by remote measurements performed in the same days. Regarding the heavy metal levels, we observe high levels of Cr (34 ng Nm^− 3), Ni (85 ng Nm^− 3) and Zn (214 ng Nm^− 3) in agreement with the local industrial source pattern. The multivariate analysis, carried out using meteorological parameters as exogenous variables, allow to evaluate the role of the different variables as driving factors of the correlation structure among the metals.