Dynamic Response Analysis of Interaction System of R.C. Gravity Single-Leg Platform

In this paper, the responses of the interaction system of R.C. gravity single-leg platform to seismic excitation are mainly analysed. A set of nonlinear equations for the interaction system are established by using the wave, one is the soil-structure interaction and the other is the fluid-structure interaction. The seismic response of the interaction system is analysed for the influence of the asymmetric structure, fluid action, etc. with the input of seismic SH waves in any direction. The numerical results are given for a simple example.     

Otolith shape as a stock discrimination tool for ling (Genypterus blacodes) in the fjords of Chilean Patagonia

ABSTRACT

Genypterus blacodes, in terms of its fishing history and local economic importance, is an emblematic species harvested in Chilean Patagonia (41°00’–57°00’S). Most of the current fisheries and biological knowledge of this species come from the open ocean, whereas information about the species in fjords and inner channels is fragmentary. In 2018, two research surveys targeting G. blacodes were conducted in the fjords and inner channels of Chilean Patagonia. A total of 253 pairs of sagittal otoliths were sampled at three different localities, and their contours were modelled using wavelet analysis as a tool for stock discrimination. Contours were compared using canonical analysis, and classification was performed using linear discriminant and Random Forest analyses. The results indicated that the wavelet method is efficient in modelling otolith contours, and the discriminant analyses showed differences among fishing grounds across the latitudinal gradient, thus confirming the hypothesis that G. blacodes conform to at least two separate stock units in Chilean Patagonia. Fishing grounds that were closer in space showed higher levels of misclassification. The discussion focuses on how environmental variables and the geography of fjords shape stock differences and how this information can be used for the sustainable management of G. blacodes.     

In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

Annual Cycle of Zooplankton Biomass, Abundance and Species Composition in the Neritic Area of the Balearic Sea, Western Mediterranean

Abstract. Seasonal changes in zooplankton biomass, abundance and species composition were studied at a neritic station in the Balearic Sea between April 1993 and May 1994. Sampling was carried out every 10 days in a zone influenced by the main current circulating through the Mallorca channel. Three main peaks of zooplankton biomass and abundance were observed: (1) at the beginning of summer when the thermocline developed, (2) in autumn when the thermocline broke down, and (3) in early spring. The smaller zooplankton fraction (100–250 μm) comprised on average 32 % of the total biomass and 73 % of total abundance. Copepods were the predominant group (64 % of the total abundance) with Clausocalanus, Oithona and Paracalanus being the most abundant genera. Paracalanus parvus, Clausocalanus furcatus, Acartia clausi, Oithona plumifera, Temora stylifera, Centropages typicus and Oncaea mediterranea were found to be the most important species in the area. Other abundant groups were cladocerans (15 %) and meroplankton larvae (12 %), both of which were particularly numerous during the stratified period. The copepod community was characterized by the above‐cited perennial species, which were abundant during the cycle studied. However, the influence of the hydrological conditions of the Balearic Sea, such as the Atlantic water influx and the physical structure of the water column (stratification and mixing), promoted the observed variability in zooplankton as well as the appearance of characteristic species during the annual cycle.     

Ship hull drag reduction using bottom air injection

The idea of bottom air injection to reduce ship hull resistance is not new. Early patents envisioned planing hull applications. Recent planing hull tests speed realized an increase of 7–12 knots. River barges and ship fitted with an air injection system results are presented to show a 10–15% reduction in the frictional resistance. Graphs for making initial estimates for displacement hulls with bottom air injection are presented. It is clear from these results that improvements in high speed planing catamarans and full form hull resistance can be realized by using bottom air injection.     

Reliability-based comparative study for mooring lines design criteria

The characteristic environmental load effect for the design of mooring systems of floating units can be defined by means of three procedures: (a) the one associated to an extreme sea state with a given return period, (b) the worst one from a set of sea states on a contour line associated to a return period or (c) the extreme one based on response statistics for a long-term period. This work presents the result of a reliability-based partial safety factor calibration study for a LRFD mooring line design criteria considering the three approaches mentioned above. The calibration exercise is applied to three FPSOs considering North Sea environmental conditions and different water depths: 200, 800 and 3000 m. The mooring systems investigated take into account mooring lines made up of chains and polyester ropes. It is shown that, among all cases investigated, the design procedure based on the long-term response is the one that presents less scattered reliability indices around the target level.     

The Sponge Population of the Cabrera Archipelago (Balearic Islands): Characteristics, Distribution, and Abundance of the Most Representative Species

Abstract. The abundance, distribution, and species richness of the littoral sponges (0–55 m) from the Cabrera Archipelago (Balearic Islands) were studied along light gradients from the surface to the sea bottom and from cave mouths to their inner parts. A total of 98 species (11 Calcarea and 87 Demospongiae ) were recorded, 8 of which are new records for the Spanish coast.
Cluster and correspondence analyses enabled the identification of a sciophilous sponge group including three subgroups: sponges found only in semi-dark cave habitats, a subgroup common to the coralligenous, precoralligenous, and semi-dark cave biocoenoses, and a third subgroup exclusive to the coralligenous biocoenosis. A small number of photophilic species and other species having a wide bathymetric distribution made up another separate group. No species clusters for the different semi-sciophilous (either fleshy or carbonate) or photophilic seaweed communities were discernible. The number of sponge species was negatively correlated with the irradiance level.     

Provenance of the Bosnian Flysch

Sandwiched between the Adriatic Carbonate Platform and the Dinaride Ophiolite Zone, the Bosnian Flysch forms a c. 3000 m thick, intensely folded stack of Upper Jurassic to Cretaceous mixed carbonate and siliciclastic sediments in the Dinarides. New petrographic, heavy mineral, zircon U/Pb and fission-track data as well as biostratigraphic evidence allow us to reconstruct the palaeogeology of the source areas of the Bosnian Flysch basin in late Mesozoic times. Middle Jurassic intraoceanic subduction of the Neotethys was shortly followed by exhumation of the overriding oceanic plate. Trench sedimentation was controlled by a dual sediment supply from the sub-ophiolitic high-grade metamorphic soles and from the distal continental margin of the Adriatic plate. Following obduction onto Adria, from the Jurassic–Cretaceous transition onwards a vast clastic wedge (Vranduk Formation) was developed in front of the leading edge, fed by continental basement units of Adria that experienced Early Cretaceous synsedimentary cooling, by the overlying ophiolitic thrust sheets and by redeposited elements of coeval Urgonian facies reefs grown on the thrust wedge complex. Following mid-Cretaceous deformation and thermal overprint of the Vranduk Formation, the depozone migrated further towards SW and received increasing amounts of redeposited carbonate detritus released from the Adriatic Carbonate Platform margin (Ugar Formation). Subordinate siliciclastic source components indicate changing source rocks on the upper plate, with ophiolites becoming subordinate. The zone of the continental basement previously affected by the Late Jurassic–Early Cretaceous thermal imprint has been removed; instead, the basement mostly supplied detritus with a wide range of pre-Jurassic cooling ages. However, a c. 80 Ma, largely synsedimentary cooling event is also recorded by the Ugar Formation, that contrasts the predominantly Early Cretaceous cooling of the Adriatic basement and suggests, at least locally, a fast exhumation.     

Total ozone variations in the tropical belt: An application for quality of ground based measurements

Summary The study of the regime of ozone variations in the huge tropical belt (25° S to 25° N), which are, in general, very small and zonally nearly symmetric, permits to establish a statistical model for estimating the ozone deviations using Total Ozone Mapping Spectrometer (TOMS) data. The equatorial stratospheric winds at 25 and 50hPa and the solar flux at 10.7 cm are used as major predictors and the linear trend was also estimated. The 10m/sec stratospheric wind change is related to1.2% ozone change at the equator, to practically no change in the 8–15° belts and up to 1.4% change with opposite phase over the tropics in spring but nearly zero change in fall. The solar cycle related amplitude is about 1.4% per 100 units of 10.7 cm solar flux. The ozone trends are negative: not significant over the equator and about –2% per decade (significant at 95% level) over the tropics. The latter could have been enforced by the 2 to 4% lower ozone values during 1991–1993, part of which might be related to the effects of the Mt. Pinatubo eruption, but might also be due to the strong QBO. The estimated deviations are verified versus reliable observations and the very good agreement permits applying the model for quantitative quality control of the reported ozone data from previous years. The standard deviation of the difference between observed ozone deviations and those estimated from the model is only 0.9–1.6% for yearly mean, that means instruments used for total ozone observations in the tropical belt should have systematic error of less than 1%. Cases when the discrepancies between the model and reported observations at a given station exceed 2–3% for time interval of 2 or more years should be verified.With 17 Figures