Impact of model complexity and multi-scale data integration on the estimation of hydrogeological parameters in a dual-porosity aquifer

This study investigates the impact of model complexity and multi-scale prior hydrogeological data on the interpretation of pumping test data in a dual-porosity aquifer (the Chalk aquifer in England, UK). In order to characterize the hydrogeological properties, different approaches ranging from a traditional analytical solution (Theis approach) to more sophisticated numerical models with automatically calibrated input parameters are applied. Comparisons of results from the different approaches show that neither traditional analytical solutions nor a numerical model assuming a homogenous and isotropic aquifer can adequately explain the observed drawdowns. A better reproduction of the observed drawdowns in all seven monitoring locations is instead achieved when medium and local-scale prior information about the vertical hydraulic conductivity (K) distribution is used to constrain the model calibration process. In particular, the integration of medium-scale vertical K variations based on flowmeter measurements lead to an improvement in the goodness-of-fit of the simulated drawdowns of about 30%. Further improvements (up to 70%) were observed when a simple upscaling approach was used to integrate small-scale K data to constrain the automatic calibration process of the numerical model. Although the analysis focuses on a specific case study, these results provide insights about the representativeness of the estimates of hydrogeological properties based on different interpretations of pumping test data, and promote the integration of multi-scale data for the characterization of heterogeneous aquifers in complex hydrogeological settings.     

Regional deformation of late Quaternary fluvial sediments in the Apennines foreland basin (Emilia,Italy)

International Journal of Earth Sciences - Our research is aimed at estimating the vertical deformation affecting late Quaternary units accumulated into the foreland basin of the Northern Apennines...     

Precursory slope distress prior to the 2010 Mount Meager landslide,British Columbia

In 2010, the south flank of Mount Meager failed catastrophically, generating the largest (53 ± 3.8 × 10⁶ m³) landslide in Canadian history. We document the slow deformation of the edifice prior to failure using archival historic aerial photographs spanning the period 1948–2006. All photos were processed using Structure from Motion (SfM) photogrammetry. We used the SfM products to produce pre-and post-failure geomorphic maps that document changes in the volcanic edifice and Capricorn Glacier at its base. The photographic dataset shows that the Capricorn Glacier re-advanced from a retracted position in the 1980s then rapidly retreated in the lead-up to the 2010 failure. The dataset also documents 60 years of progressive development of faults, toe bulging, and precursory failures in 1998 and 2009. The 2010 collapse was conditioned by glacial retreat and triggered by hot summer weather that caused ice and snow to melt. Meltwater increased pore water pressures in colluvium and fractured rocks at the base of the slope, causing those materials to mobilize, which in turn triggered several secondary failures structurally controlled by lithology and faults. The landslide retrogressed from the base of the slope to near the peak of Mount Meager involving basement rock and the overlying volcanic sequence. Elsewhere on the flanks of Mount Meager, large fractures have developed in recently deglaciated areas, conditioning these slopes for future collapse. Potential failures in these areas have larger volumes than the 2010 landslide. Anticipated atmospheric warming over the next several decades will cause further loss of snow and glacier ice, likely producing additional slope instability. Satellite- and ground-based monitoring of these slopes can provide advanced warning of future landslides to help reduce risk in populated regions downstream.     

克拉美丽山南缘西段盆山耦合机制

克拉美丽山位于准噶尔盆地东部,晚古生代克拉美丽洋盆向北俯冲消亡,西伯利亚板块与准噶尔地块在该地区发生碰撞造山。目前,就石炭纪之后克拉美丽山的构造活动存在持续挤压、拉分、伸展、挤压-伸展转换多种观点,构造样式也各不相同。本文应用断层相关褶皱理论,从盆山过渡带现今构造样式入手来探讨克拉美丽山南缘西段盆山耦合机制。研究结果表明,克拉美丽山西段在石炭纪之后经历了中二叠世早期、早三叠世早期、晚三叠世末期、晚侏罗世-早白垩世、晚白垩世早期和古新世末期6 次构造隆升。前4 期相对稳定沉积,晚白垩世早期,晚古生代地层沿着下二叠统底部的泥岩层滑脱面以叠瓦状构造楔样式向南楔入,构造缩短量大于15 km,现今盆山构造样式初步形成。始新世构造楔遭受后期突破断层改造。始新世后,克拉美丽山大规模的构造活动基本停止,地层遭受剥蚀最终形成现今地质结构。     

福贡地区石炭系地层可能属于拉萨地块:来自碎屑锆石年龄谱的指示

欧亚与印度大陆的碰撞使得印度大陆的北东角强烈挤入欧亚大陆内部,形成东构造结,其引发的强烈变形将南羌塘地块、北羌塘地块、拉萨地块、保山地块、兰坪-思茅地块以及地块之间的缝合带挤压于很窄的范围内,造成青藏高原腹地与其东南缘之间构造单元划分、对比困难。滇西福贡地区位于青藏高原东南缘,东构造结影响范围内,是三江造山带及青藏高原相关地块的汇聚处。福贡地区石炭系岩石组合表明其形成于较为稳定的浅海相沉积环境中,具有被动大陆边缘沉积特征。三件石炭系二云母石英片岩碎屑锆石表面年龄数据(194个有效分析点)形成五个主要年龄区间:2550~2400Ma、1800~1550Ma、1200~1080Ma、1000~850Ma和600~480Ma,峰值分别为~2502Ma、~1724Ma、~1120Ma、~886Ma和~512Ma。对比其他地块同时代地层的碎屑锆石年龄谱表明,福贡地区石炭系可能是拉萨地块的一部分,与腾冲地块一样,属于其南延部分。结合中新生代岩浆岩带的构造连续性,我们认为,印度板块东北角向北、北东方向的强烈挤压导致拉萨地块及冈底斯岩浆岩带弯曲、缩颈、并发生分离与旋转。     

不同方法评价喀斯特煤矿区农田土壤重金属生态风险比较

采用TCLP法、内梅罗综合污染指数、嵌入Igeo综合污染指数法等方法对贵州织金县某煤矿区周边农田土壤重金属进行评价。土壤中Cd、Cr、Cu、Ni、Hg和Zn的含量范围分别为0.79～2.08 mg·kg-1、144.20～464.40 mg·kg-1、91.63～187.50 mg·kg-1、48.13～104.47 mg·kg-1、0.14～2.33 mg·kg-1、144.35～265.89 mg·kg-1,所有土壤样点的Cd、Cr、Cu和Ni含量均已超过国家土壤环境质量二级标准,部分土壤样点的Hg和Zn含量超过二级标准。TCLP法评价结果所有土壤样点均未受到重金属污染;内梅罗综合污染指数法评价结果为农田土壤重金属生态风险处于安全水平;嵌入Igeo综合污染指数法评价结果表明,90%的土壤达到中度污染以上,其中65%的土壤处于中度污染,25%的土壤受到中度至重度污染;潜在生态危害指数法评价表明,所有土壤样点重金属均处于轻微生态风险水平。针对不同评价方法得出的结果存在差异的情况,在评价土壤重金属污染状况时,应根据评价目标的差异选择合适的评价方法。      

The digital ‘connected’ earth: open technology for providing location-based services on degraded communication environments

In the current world, it is easy to listen that everybody and everything is connected. Over this connected world, the concept of location-based services has grown in order to provide digital services in everyplace and at every time. Nevertheless, this is not 100% true because the connection is not guaranteed for many people and in many places. These are the Degraded Communications Environments (DCE), environments where the availability of high-speed communications is not guaranteed in at least the 75% of the time. This paper works over the experience of a previous work in developing light protocols that do not need broadband for communication. This work provides an extension of these protocols for the inclusion of mobile devices as elements of the communication process and a set of libraries to allow the development of applications in DCE. The work done has involved the development of two frameworks: an Android framework that makes the incorporation of Android devices easier and a server-based framework that provides the server side for the development of the referred applications. A use case that uses these two frameworks has been developed. Finally, all technology developed is available throw a public Git repository.     

斜向伸展变形构造样式及成因机制分析——以济阳坳陷沾化凹陷为例

正众多研究表明,渤海湾盆地及周缘隆起区的构造自中生代以来受到西伯利亚板块、扬子板块、太平洋板块向华北板块俯冲,以及印度板块远程效应的影响,形成了伸展构造和走滑构造两种相互关联却又相互独立的构造现象(李三忠等,2018;任建业,2018)。渤海湾盆地的北缘和东缘受控于郯庐断裂带,其走滑构造样式、变形时间及已经得到了大量的研究。     

东喜马拉雅构造结泥质高压麻粒岩的锆石和独居石定年与地质意义

东喜马拉雅构造结的南迦巴瓦杂岩含有广泛分布的高压麻粒岩,但由于以前获得了许多不同的年龄,对这些麻粒岩的变质与深熔时代、持续时间和成因存在不同认识。本文对泥质高压麻粒岩（蓝晶石榴黑云片岩）中的锆石和独居石进行了系统的内部结构、U-（Th）-Pb定年和微量元素分析,以求揭示这些岩石是否具有相同的演化过程。所研究的6个蓝晶石榴黑云片岩由石榴石、蓝晶石、黑云母、石英、钾长石、斜长石、夕线石、白云母、石墨和副矿物金红石、钛铁矿、锆石和独居石组成,峰期矿物组合是石榴石+蓝晶石+斜长石+钾长石+黑云母+石英+金红石。6个样品中的锆石均由继承碎屑核+变质（深熔）幔+变质（深熔）边组成。其中3个样品中的锆石幔和边较宽,均可进行原位定年,幔部给出了类似的较老年龄范围（39.6~31.6Ma、40.8~32.0Ma和38.1~31.3Ma）,而边部给出了类似的较年轻年龄范围（26.8~17.3Ma、28.3~18.6Ma和28.4~18.8Ma）。另外3个样品的锆石幔部较窄,不能进行分析,其边部给出了与前3个样品锆石边部类似的年轻年龄范围（22.0~17.0Ma、20.9~16.9Ma和22.2~16.6Ma）。一个片岩样品中的独居石给出了与其锆石幔部+边部年龄类似的较宽年龄范围（38.1~17.5Ma）,而另外3个样品中的独居石获得了与其锆石边部年龄相似的年轻年龄范围（26.0~18.8Ma、22.3~16.9Ma和26.4~19.4Ma）。随着年龄的减小,锆石和独居石的Th/U比值增大,Eu/Eu^*减小,独居石的HREE和Y含量减小。基于这些分析结果,笔者认为所研究的6个片岩记录了相同的、从~41Ma持续到~17Ma的进变质与深熔过程。但是,由于某些样品中的锆石和独居石在早期变质和深熔过程中形成的结晶域（锆石幔部）很窄,无法定年,导致不同的样品获得了不同的年龄范围。结合现有研究成果,笔者推测南迦巴瓦杂岩中的高压麻粒岩经历了相似的长期进变质与深熔过程。