Exploring desiccation cracks in soils using a 2D profile laser device

The study of desiccation cracks in soils has been a subject of increasing attention in recent research. This paper presents the use of a 2D profile laser that is coupled with a motion controller (that allows scanning the overall surface of a drying soil) and electronic balance (to measure the water loss). The aim is to accurately track the three most relevant variables associated with the behavior of soils during desiccation: volume change, water loss and evolving crack network’s morphology. The paper presents the methodology to obtain a digital model of the soil using the experimental setup described above. The main results of a natural soil subjected to drying are presented and discussed, including evolution of cracks aperture; evolution of cracks depth, surface contour levels (at different times); and evolution of volume change. It is shown that the proposed methodology provides very useful information for studying the behavior of soils subjected to desiccation.     

The significance of Chara vegetation in the precipitation of lacustrine calcium carbonate

A significant portion of calcium carbonate is deposited in lake sediments as a result of biological processes related to the photosynthetic activity of phytoplankton in the pelagic realm and, in addition, macrophytes in the littoral zone. Lake Wigry, one of the largest lakes in Poland (north‐east Poland), is characterized by: (i) carbonate sediments with a CaCO₃ content exceeding 80% within the littoral zone; and (ii) large areas of submerged vegetation dominated by charophytes (macroscopic green algae, Characeae family). It is claimed that charophytes are highly effective in utilizing HCO₃^? and forming thick CaCO₃ encrustations. Thus, this study was aimed at evaluating the CaCO₃ production by dense Chara stands overgrowing the lake bottom reaching a depth of 4 m. In late July 2009, the fresh and dry mass of plants, the percentage contribution of calcium carbonate and the production of CaCO₃ per 1 m² were investigated along three transects at three depths (1 m, 2 m and 3 m, with each sample area equal to 0·0625 m²) per transect. The composition and structure of phytoplankton and the physico‐chemical properties of the water analysed in both the littoral and pelagic zones served as the environmental background and demonstrated moderately low fertility in the lake. The greatest dry plant mass exceeded 1000 g m^?2 and CaCO₃ encrustations constituted from 59% to over 76% of the charophyte dry weight. Thus, the maximum and average values of carbonates precipitated by charophytes were 685·5 and 438 g m^?2, respectively, which exceeded previously reported results. A correlation of carbonate production with the depth of Chara stands was detected, and intermediate depths offered the most favourable conditions for carbonate precipitation (589 g m^?2 on average). As precipitated carbonates are ultimately stored in bottom deposits, the results highlight the significance of charophytes in lacustrine CaCO₃ sedimentation.     

Dependence of radon concentration in natural gas on the geological and physical parameters of the gas reservoir

Pressure of natural gas in its rock reservoir determines the final radon concentration in this gas after its decompression to normal conditions. In this investigation, radon contents of 62 natural gas samples were measured and a simple physical model of the gas reservoir was applied. The model takes into account an additional dependence of radon concentration on the natural gas pressure and on the porosity of the rock reservoir. The influence of the gas pressure on the value of the radon emanating power is discussed. The mean ²²⁶ Ra content in the source rock needed for generation of ²²² Rn concentrations observed in gas is also calculated. The calculations are made with the help of regression analysis.     

Seasonal and spatial changes in the zooplankton community of Kongsfjorden, Svalbard

Seasonal changes in the zooplankton composition of the glacially influenced Kongsfjorden, Svalbard (79°N, 12°E), and its adjacent shelf were studied in 2002. Samples were collected in the spring, summer and autumn in stratified hauls (according to hydrographic characteristics), by means of a 0.180-mm Multi Plankton Sampler. A strong front between the open sea and the fjord waters was observed during the spring, preventing water mass exchange, but was not observed later in the season. The considerable seasonal changes in zooplankton abundance were related to the seasonal variation in hydrographical regime. The total zooplankton abundance during the spring (40–2010 individuals m⁻³) was much lower than in the summer and autumn (410–10 560 individuals m⁻³). The main factors shaping the zooplankton community in the fjord include: the presence of a local front, advection, the flow pattern and the decreasing depth of the basin in the inner fjord. Presumably these factors regulate the gross pattern of zooplankton density and distribution, and override the importance of biological processes. This study increased our understanding of seasonal processes in fjords, particularly with regard to the strong seasonal variability in the Arctic.     

Seasonal and spatial changes of metal concentrations in groundwater outflows from porous sediments in the Gryżyna-Grabin Tunnel Valley in western Poland

Groundwater outflows (springs and seeps) from porous sediments on European lowlands play a significant role in the surface water balance. It is therefore important to document these outflows’ water quality and spatial and temporal changes. The present study focused on changes in iron, manganese, and heavy metals in waters of groundwater outflows in an area of low anthropogenic impact—the Gryżyna-Grabin Tunnel Valley in western Poland. Eleven outflows were studied for a period of 2 years. Most of the samples analyzed revealed low element contents and little variation in time and space. Only values of iron and lead were above World Health Organization limits for drinking water. The concentrations of these elements were also variable in time and space. The seasonal changes in iron content are probably due to natural, temperature- and pH-controlled reactions of shallow groundwater with aquifer sediments. On the other hand, the elevated lead content points to regional water contamination.     

Fractionation of heavy metals in bottom sediments using Tessier procedure

The study presents the results of Cu, Pb, Zn, Mn and Fe determination in the samples of bottom sediments collected from the Oder and Warta rivers. The sequential extraction of metals in the samples of bottom sediments was performed after introducing the modification of the extraction scheme suggested by Tessier et al. (Anal Chem 51(7):844–851, 1979). The extraction times of particular stages were optimised. The fifth stage was altered by introducing the new methods of performing extraction. The samples of bottom sediments submitted the following granulometric analyses: dry, wet and wet with (HMP) dispersing reagent. Seven granulometric fractions with the following grain sizes were isolated: >2.0, 2.0–1.0, 1.0–0.5, 0.5–0.25, 0.25–0.1, 0.1–0.063 and <0.063 mm. The sequential extraction of particular granulometric fractions was performed. The concentration of metals variability was analysed depending on the method of sample preparation for the chemical analysis, granulometric fraction of sediments subjected to the analysis, extraction conditions and the site of samples collection. The lack of linearity between the metal concentration and the size of granulometric fraction was observed. The highest concentrations of metals were observed in fractions >2.0, 2.0–1.0 and 0.1–0.063 and <0.063 mm while the lowest concentrations occurred in fractions 1.0–0.5, 0.5–0.25, and 0.25–0.1 mm. The atomic absorption spectrometry with flame atomisation (F-AAS) was used for the determination of the investigated elements.     

Micrometeorological Measurements in a Street Canyon during the Joint ATREUS-PICADA Experiment

In order to investigate the microclimatic conditions in a street canyon, a physical model was used to conduct the Joint ATREUS-PICADA Experiment (JAPEX) in situ experimental campaign. Four lines of buildings simulated by steel containers were installed to form three parallel street canyons at 1:5 scale, with width/height aspect ratio approximately 0.40. The reference wind and atmospheric conditions were measured, as well as the flow velocity and direction in the street. Preliminary results concern street canyon ventilation and thermal effects on in-canyon airflow, and show that vortical motions appear for reference wind directions perpendicular to the street axis. The presence of adjacent rows of buildings did not appear to significantly influence the flow character within the canyon for the case of a low aspect ratio corresponding to a skimming flow regime. The flow structure was not significantly affected by the thermal effects although some slight interference occurred in the lower part of the canyon. An analysis of horizontal temperature gradients indicated that a thin boundary layer develops near the heated facade. These facts imply that the thermal effects are considerable only very close to the wall.     

Landslide databases in the Geological Surveys of Europe

Landslides are one of the most widespread geohazards in Europe, producing significant social and economic impacts. Rapid population growth in urban areas throughout many countries in Europe and extreme climatic scenarios can considerably increase landslide risk in the near future. Variability exists between European countries in both the statutory treatment of landslide risk and the use of official assessment guidelines. This suggests that a European Landslides Directive that provides a common legal framework for dealing with landslides is necessary. With this long-term goal in mind, this work analyzes the landslide databases from the Geological Surveys of Europe focusing on their interoperability and completeness. The same landslide classification could be used for the 849,543 landslide records from the Geological Surveys, from which 36% are slides, 10% are falls, 20% are flows, 11% are complex slides, and 24% either remain unclassified or correspond to another typology. Most of them are mapped with the same symbol at a scale of 1:25,000 or greater, providing the necessary information to elaborate European-scale susceptibility maps for each landslide type. A landslide density map was produced for the available records from the Geological Surveys (LANDEN map) showing, for the first time, 210,544 km² landslide-prone areas and 23,681 administrative areas where the Geological Surveys from Europe have recorded landslides. The comparison of this map with the European landslide susceptibility map (ELSUS 1000 v1) is successful for most of the territory (69.7%) showing certain variability between countries. This comparison also permitted the identification of 0.98 Mkm² (28.9%) of landslide-susceptible areas without records from the Geological Surveys, which have been used to evaluate the landslide database completeness. The estimated completeness of the landslide databases (LDBs) from the Geological Surveys is 17%, varying between 1 and 55%. This variability is due to the different landslide strategies adopted by each country. In some of them, landslide mapping is systematic; others only record damaging landslides, whereas in others, landslide maps are only available for certain regions or local areas. Moreover, in most of the countries, LDBs from the Geological Surveys co-exist with others owned by a variety of public institutions producing LDBs at variable scales and formats. Hence, a greater coordination effort should be made by all the institutions working in landslide mapping to increase data integration and harmonization.     

Assessment of heavy metal contamination levels of street dust in the city of Lublin,E Poland

Heavy metals are constantly emitted into the environment and pose a major threat to human health, particularly in urban areas. The threat is linked to the presence of Cd, Cr, Cu, Ni, Pb, and Zn in street dust, which consists of mineral and organic particles originating from the soil, industrial emitters, motor vehicles, and fuel consumption. The study objective was to determine the level of street dust contamination with trace metals in Lublin and to indicate their potential sources of origin. The analyses were carried out with an energy-dispersive X-ray fluorescence spectrometer. The sampling sites (49) were located within the city streets characterised by varying intensity of motor traffic. The following mean content values and their variation (SD) were determined: Cd: 5.1?±?1.7 mg kg^?1, Cr: 86.4?±?23.3 mg kg^?1, Cu: 81.6?±?69.2 mg kg^?1, Ni: 16.5?±?3.9 mg kg^?1, Pb: 44.1?±?16.4 mg kg^?1, and Zn: 241.1?±?94.6 mg kg^?1. The level of pollution was assessed with several widely used geochemical indices (geoaccumulation index, enrichment factor, pollution index, index of ecological risk, and potential ecological risk index). For most of the indices, the mean (median) values are arranged in the following manner: Zn?>?Cu(or Cd)?>?Pb?>?Ni?>?Cr. In general, street dust in Lublin does not show pollution with Cr, Ni, and Pb. I_geo and EF indices show moderate levels for Cu, Cd, and Zn; their presence in street dust is linked with anthropogenic factors (motor traffic). A significant threat is posed by Cd, and more than half of the samples show considerable pollution with cadmium (median for the index of ecological risk: 151). The spatial pattern of indices and the results of statistical analyses (CA, PCA) indicate three groups of elements: (1) Cr and Ni: natural origin; (2) Pb: mixed origin; and (3) Cd, Cu, and Zn: anthropogenic origin (mainly motor vehicle traffic). Higher content values for metals of anthropogenic origin in street dust indicate that it is a source of pollution of soil and air in the city.