Hydrogeochemical Features of Thermal Waters of South Trungbo (Central Vietnam)

The results of studying the features of the hydrogeological structure and chemical and isotope composition of thermal waters from the central part of Vietnam that are characterized by intense manifestations of intrusive magmatism are presented. It is established that low–and high–thermal waters with temperature varying within 30–85°C are developed in the area under study. The value of total mineralization of the hydrotherms ranges from 0.05 to 10.05 g/dm³. It is assumed that the circulation of thermal waters that are different in temperature and chemical composition occurs at two levels. The regular change of the hydrotherm composition in the direction from mineralized chloride sodium, including with increased Ca content, to fresh sodium bicarbonate is revealed. The ratio of δ¹⁸O–δ²H isotopes indicates that the water component is based on meteoric water. In the coastal areas, there is an isotope shift towards the ocean waters, which is also confirmed by the hydrogeochemical data. The key factors for forming the chemical composition of the thermal waters in South Trungbo are their genetic type, the interaction processes in the “water–rock–gas–organic substance” system, and their equilibrium–nonequilibrium state.     

An experimental study of Fe–Ni exchange between sulfide melt and olivine at upper mantle conditions: implications for mantle sulfide compositions and phase equilibria

The behavior of nickel in the Earth’s mantle is controlled by sulfide melt–olivine reaction. Prior to this study, experiments were carried out at low pressures with narrow range of Ni/Fe in sulfide melt. As the mantle becomes more reduced with depth, experiments at comparable conditions provide an assessment of the effect of pressure at low-oxygen fugacity conditions. In this study, we constrain the Fe–Ni composition of molten sulfide in the Earth’s upper mantle via sulfide melt–olivine reaction experiments at 2 GPa, 1200 and 1400 °C, with sulfide melt \(X_{{{\text{Ni}}}}^{{{\text{Sulfide}}}}=\frac{{{\text{Ni}}}}{{{\text{Ni}}+{\text{Fe}}}}\) (atomic ratio) ranging from 0 to 0.94. To verify the approach to equilibrium and to explore the effect of \({f_{{{\text{O}}_{\text{2}}}}}\) on Fe–Ni exchange between phases, four different suites of experiments were conducted, varying in their experimental geometry and initial composition. Effects of Ni secondary fluorescence on olivine analyses were corrected using the PENELOPE algorithm (Baró et al., Nucl Instrum Methods Phys Res B 100:31–46, 1995), “zero time” experiments, and measurements before and after dissolution of surrounding sulfides. Oxygen fugacities in the experiments, estimated from the measured O contents of sulfide melts and from the compositions of coexisting olivines, were 3.0?±?1.0 log units more reduced than the fayalite–magnetite-quartz (FMQ) buffer (suite 1, 2 and 3), and FMQ ??1 or more oxidized (suite 4). For the reduced (suites 1–3) experiments, Fe–Ni distribution coefficients \(K_{{\text{D}}}^{{}}=\frac{{(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}/X_{{{\text{Fe}}}}^{{{\text{sulfide}}}})}}{{(X_{{{\text{Ni}}}}^{{{\text{olivine}}}}/X_{{{\text{Fe}}}}^{{{\text{olivine}}}})}}\) are small, averaging 10.0?±?5.7, with little variation as a function of total Ni content. More oxidized experiments (suite 4) give larger values of K_D (21.1–25.2). Compared to previous determinations at 100 kPa, values of K_D from this study are chiefly lower, in large part owing to the more reduced conditions of the experiments. The observed difference does not seem attributable to differences in temperature and pressure between experimental studies. It may be related in part to the effects of metal/sulfur ratio in sulfide melt. Application of these results to the composition of molten sulfide in peridotite indicates that compositions are intermediate in composition (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.4–0.6) in the shallow mantle at 50 km, becomes more Ni rich with depth as the O content of the melt diminishes, reaching a maximum (0.6–0.7) at depths near 80–120 km, and then becomes more Fe rich in the deeper mantle where conditions are more reduced, approaching (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.28)?>?140 km depth. Because Ni-rich sulfide in the shallow upper mantle melts at lower temperature than more Fe-rich compositions, mantle sulfide is likely molten in much of the deep continental lithosphere, including regions of diamond formation.     

Do sedentary behavior and physical activity spatially cluster? Analysis of a population-based sample of Boston adolescents

Sedentary behavior and lack of physical activity are key modifiable behavioral risk factors for chronic health problems, such as obesity and diabetes. Little is known about how sedentary behavior and physical activity among adolescents spatially cluster. The objective was to detect spatial clustering of sedentary behavior and physical activity among Boston adolescents. Data were used from the 2008 Boston Youth Survey Geospatial Dataset, a sample of public high school students who responded to a sedentary behavior and physical activity questionnaire. Four binary variables were created: (1) TV watching (>2 h/day), (2) video games (>2 h/day), (3) total screen time (>2 h/day); and (4) 20 min/day of physical activity (≥5 days/week). A spatial scan statistic was utilized to detect clustering of sedentary behavior and physical activity. One statistically significant cluster of TV watching emerged among Boston adolescents in the unadjusted model. Students inside the cluster were more than twice as likely to report >2 h/day of TV watching compared to respondents outside the cluster. No significant clusters of sedentary behavior and physical activity emerged. Findings suggest that TV watching is spatially clustered among Boston adolescents. Such findings may serve to inform public health policy-makers by identifying specific locations in Boston that could provide opportunities for policy intervention. Future research should examine what is linked to the clusters, such as neighborhood environments and network effects.     

Estimation of commercial diamond grades based on microdiamonds: a case study of the Koidu diamond mine,Sierra Leone

This paper documents the application of a microdiamond-based approach to the estimation of diamond grade in the Pipe 1 kimberlite at the Koidu mine in Sierra Leone. A geological model of Pipe 1 was constructed to represent the distribution and volume of the dominant kimberlite units within the pipe. Bulk samples, along with representative microdiamond samples, were collected from these units at surface and were used to define the ratio between microdiamond stone frequency (+212 μm stones per kilogram) and recoverable macrodiamond grade (+1.2 mm carats per tonne; 1 carat = 0.2 g). These ratios were applied to a comprehensive, spatially representative microdiamond sample dataset and were combined with a spatial model of country-rock xenolith dilution within the pipe to estimate +1.2 mm recoverable grades. The resource estimate was reconciled with subsequent production results in the elevation range 160 to 100 m above sea level. Production results for each of the six 10 m benches covering this elevation range were compared to the estimated average grades for these zones in the pipe. For the five cases where most of the kimberlite mass on a given bench is represented in the production data, the results show a maximum discrepancy of 6% between predicted and reported production grade with no indication of any consistent bias. This indicates that, when supported by a sound geological model and suitable microdiamond and macrodiamond data, the microdiamond-based estimation approach can provide reliable constraints on macrodiamond grade, even in the case of geologically complex bodies such as Koidu Pipe 1.

     

敦煌造山带长山子地区变质演化及年代学研究

长山子地区位于敦煌造山带东北部,瓜州南部约100km处。该区主要出露一套中-高级变质表壳岩,主要岩石类型有长英质片麻岩、变泥质麻粒岩、高压基性麻粒岩、斜长角闪片麻岩。高压基性麻粒岩岩块、斜长角闪片麻岩岩块以构造透镜体或布丁(长度为0. 5~15m)的形式,被夹持于长英质片麻岩、变泥质麻粒岩组成的基质之中,呈现典型"基质夹岩块"的混杂带特征。高压基性麻粒岩、斜长角闪片麻岩、泥质麻粒岩中,普遍保留了二至三个阶段的变质矿物组合。进变质阶段矿物组合(M1)为石榴子石变斑晶中的细小矿物包裹体,变质高峰期矿物组合(M2)为石榴子石变斑晶和基质矿物,退变质阶段矿物组合(M3)主要为围绕石榴子石变斑晶边部发育的"白眼圈"状后成合晶。本区各类变质岩石均记录了顺时针型变质作用P-T轨迹,系典型俯冲-碰撞造山带变质作用特征。退变质阶段P-T轨迹属于西阿尔卑斯型,说明变质岩折返速率较快。变质高峰期(M2)属于中压变质相系,P-T条件分别为790~870℃/1.29~1.37GPa(高压基性麻粒岩)、680~685℃/0.89~0.97GPa(斜长角闪片麻岩)、860~880℃/0.90~1.14GPa(变泥质麻粒岩),它们之间存在大的差异。这说明,它们是形成于同一俯冲隧道内不同深度的变质岩石,在构造折返阶段才混杂在一起形成构造混杂岩。二次离子质谱(SIMS)锆石U-Pb定年表明,长山子地区变质杂岩记录了早泥盆世的俯冲事件(419~417Ma)。     

Carbon costs and benefits of France’s biomass energy production targets

Background

Concern about climate change has motivated France to reduce its reliance on fossil fuel by setting targets for increased biomass-based renewable energy production. This study quantifies the carbon costs and benefits for the French forestry sector in meeting these targets. A forest growth and harvest simulator was developed for French forests using recent forest inventory data, and the wood-use chain was reconstructed from national wood product statistics. We then projected wood production, bioenergy production, and carbon balance for three realistic intensification scenarios and a business-as-usual scenario. These intensification scenarios targeted either overstocked, harvest-delayed or currently actively managed stands.

Results

All three intensification strategies produced 11.6–12.4 million tonnes of oil equivalent per year of wood-based energy by 2026, which corresponds to the target assigned to French wood-energy to meet the EU 2020 renewable energy target. Sustaining this level past 2026 will be challenging, let alone further increasing it. Although energy production targets can be reached, the management intensification required will degrade the near-term carbon balance of the forestry sector, compared to continuing present-day management. Even for the best-performing intensification strategy, i.e., reducing the harvest diameter of actively managed stands, the carbon benefits would only become apparent after 2040. The carbon balance of a strategy putting abandoned forests back into production would only break even by 2055; the carbon balance from increasing thinning in managed but untended stands would not break even within the studied time periods, i.e. 2015–2045 and 2046–2100. Owing to the temporal dynamics in the components of the carbon balance, i.e., the biomass stock in the forest, the carbon stock in wood products, and substitution benefits, the merit order of the examined strategies varies over time.

Conclusions

No single solution was found to improve the carbon balance of the forestry sector by 2040 in a way that also met energy targets. We therefore searched for the intensification scenario that produces energy at the lowest carbon cost. Reducing rotation time of actively managed stands is slightly more efficient than targeting harvest-delayed stands, but in both cases, each unit of energy produced has a carbon cost that only turns into a benefit between 2060 and 2080.

     

Flood-prone area mapping using machine learning techniques: a case study of Quang Binh province,Vietnam

Natural Hazards - Vietnam’s central coastal region is the most vulnerable and always at flood risk, severely affecting people’s livelihoods and socio-economic development. In...     

Statistical forecast of the marine surge

Natural Hazards - This paper studies different machine learning methods for solving the regression problem of estimating the marine surge value given meteorological data. The marine surge is...     

Stormwater harvesting in ephemeral streams: how to bypass clogging and unsaturated layers

To cope with water scarcity in drylands, stormwater is often collected in surface basins and subsequently stored in shallow aquifers via infiltration. These stormwater harvesting systems are often accompanied by high evaporation rates and hygiene problems. This is commonly a consequence of low infiltration rates, which are caused by clogging layers that form on top of the soil profile and the presence of a thick vadose zone. The present study aims to develop a conceptual solution to increase groundwater recharge rates in stormwater harvesting systems. The efficiency of vadose-zone wells and infiltration trenches is tested using analytical equations, numerical models, and sensitivity analyses. Dams built in the channel of ephemeral streams (wadis) are selected as a study case to construct the numerical simulations. The modelling demonstrated that vadose-zone wells and infiltration trenches contribute to effective bypassing of the clogging layer. By implementing these solutions, recharge begins 2250–8100% faster than via infiltration from the bed surface of the wadi reservoir. The sensitivity analysis showed that the recharge rates are especially responsive to well length and trench depth. In terms of recharge quantity, the well had the best performance; it can infiltrate up to 1642% more water than the reservoir, and between 336 and 825% more than the trench. Moreover, the well can yield the highest cumulative recharge per dollar and high recharge rates when there are limitations to the available area. The methods investigated here significantly increased recharge rates, providing practical solutions to enhance aquifer water storage in drylands.