Fluidization of buried mass-wasting deposits in lake sediments and its relevance for paleoseismology: Results from a reflection seismic study of lakes Villarrica and Calafquén (South-Central Chile)

A dense grid of very-high resolution seismic profiles on Lake Villarrica provides a quasi-3D view on intercalated lenses of low-amplitude reflections, which are connected by acoustic wipe-out patches and fractures to an underlying voluminous mass-wasting deposit. The lenses are interpreted as being created by earthquake-triggered liquefaction in this buried mass-wasting deposit and subsequent sediment fluidization and extrusion at the paleo-lake bottom. These sediment volcanoes are mapped in detail. They have a rather uniform circular geometry and show a linear relationship between apparent width and maximum thickness on a seismic section. The largest sediment volcanoes are up to 80 m wide and 1.9 m thick. Their slope angles designate a syn- to post-depositional sagging of most sediment volcanoes. Sediment volcano detection and mapping from nearby Lake Calafquén further strengthen the revealed geometrical relationships. Locally, some of the sediment/fluid escape structures extend to a higher position in the stratigraphy, which points to a polyphase escape process associated with multiple multi-century spaced strong earthquakes. Thickness and morphology of the source layer seem to exert a dominant control in the production of sediment/fluid extrusions. This study shows that reflection seismic profiling allowed recognizing 4 different seismic events in the studied stratigraphic interval, which are evidenced by mass-wasting deposits and/or fluidization features.     

Petrologic and textural diversity among the PCA 02 howardite group,one of the largest pieces of the Vestan surface

Abstract— Nine howardites and two diogenites were recovered from the Pecora Escarpment Icefield (PCA) in 2002. Cosmogenic radionuclide abundances indicate that the samples are paired and that they constituted an approximately 1 m (diameter) meteoroid prior to atmospheric entry. At about 1 m in diameter, the PCA 02 HED group represents one of the largest single pre‐atmospheric pieces of the Vestan surface yet described. Mineral and textural variations were measured in six of the PCA 02 howardites to investigate meter‐scale diversity of the Vestan surface. Mineral compositions span the range of known eucrite and diogenite compositions. Additional non‐diogenitic groups of Mg‐ and Fe‐rich olivine are observed, and are interpreted to have been formed by exogenic contamination and impact melting, respectively. These howardites contain olivine‐rich impact melts that likely formed from dunite‐ and harzburgite‐rich target rocks. Containing the first recognized olivine‐rich HED impact melts, these samples provide meteoritic evidence that olivine‐rich lithologies have been exposed on the surface of Vesta. Finally, we present a new method for mapping distributions of lithologies in howardites using 8 elemental X‐ray maps. Proportions of diogenite and eucrite vary considerably among the PCA 02 howardites, suggesting they originated from a heterogeneous portion of the Vestan surface. While whole sample modes are dominated by diogenite, the finer grain size fractions are consistently more eucritic. This discrepancy has implications for near‐infrared spectral observations of portions of Vesta’s surface that are similar to the PCA 02 howardites, as the finer grained eucritic material will disproportionately dominate the spectra.     

Estimating economic losses of midrise reinforced concrete shear wall buildings in sedimentary basins by combining empirical and simulated seismic hazard characterizations

Studies of recorded ground motions and simulations have shown that deep sedimentary basins can greatly increase the intensity of earthquake ground motions within a period range of approximately 1–4 s, but the economic impacts of basin effects are uncertain. This paper estimates key economic indicators of seismic performance, expressed in terms of earthquake‐induced repair costs, using empirical and simulated seismic hazard characterizations that account for the effects of basins. The methodology used is general, but the estimates are made for a series of eight‐ to 24‐story residential reinforced concrete shear wall archetype buildings in Seattle, WA, whose design neglects basin effects. All buildings are designed to comply with code‐minimum requirements (i.e., reference archetypes), as well as a series of design enhancements, which include (a) increasing design forces, (b) decreasing drift limits, and (c) a combination of these strategies. As an additional reference point, a performance‐based design is also assessed. The performance of the archetype buildings is evaluated for the seismic hazard level in Seattle according to the 2018 National Seismic Hazard Model (2018 NSHM), which explicitly considers basin effects. Inclusion of basin effects results in an average threefold increase in annualized losses for all archetypes. Incorporating physics‐based ground motion simulations to represent the large‐magnitude Cascadia subduction interface earthquake contribution to the hazard results in a further increase of 22% relative to the 2018 NSHM. The most effective of the design strategies considered combines a 25% increase in strength with a reduction in drift limits to 1.5%.     

When do rock glacier fronts fail? Insights from two case studies in South Tyrol (Italian Alps)

The fronts of two rock glaciers located in South Tyrol (Italian Alps) failed on 13 August 2014, initiating debris flows in their downslope channels. A multimethod approach including climate, meteorological, and ground temperature data analysis, aerial image correlation, as well as geotechnical testing and modeling, led to the reconstruction of the two events. An integrated investigation of static predisposing factors, slowly changing preparatory factors, and potential triggering events shed light on the most likely reasons for such failures. Our results suggest that the occurrence of front destabilization at the two rock glaciers can only partly be explained by the occurrence of heavy rainfall events. Indeed, antecedent hydrological and thermal ground conditions were characterized by a saturated active layer favored by a snow-rich winter and extensive precipitation in late spring and summer. Also, the rising trend of air temperature during spring and summer months since 1950s might explain the concurrent marked displacement of the two rock glaciers. Indeed, geotechnical investigations have provided strong indications that one of the investigated rock glacier fronts was at a marginally stable state prior to 2014. As rainfall events more intense than the one that occurred in August 2014 were previously recorded in the same area without resulting failures at the studied rock glaciers, we propose that both predisposing and preparatory destabilizing factors have played a key role in the 2014 rock glacier front failures.     

Nonlinear Force-Free Modeling of Coronal Magnetic Fields. II. Modeling a Filament Arcade and Simulated Chromospheric and Photospheric Vector Fields

We compare a variety of nonlinear force-free field (NLFFF) extrapolation algorithms, including optimization, magneto-frictional, and Grad – Rubin-like codes, applied to a solar-like reference model. The model used to test the algorithms includes realistic photospheric Lorentz forces and a complex field including a weakly twisted, right helical flux bundle. The codes were applied to both forced “photospheric” and more force-free “chromospheric” vector magnetic field boundary data derived from the model. When applied to the chromospheric boundary data, the codes are able to recover the presence of the flux bundle and the field’s free energy, though some details of the field connectivity are lost. When the codes are applied to the forced photospheric boundary data, the reference model field is not well recovered, indicating that the combination of Lorentz forces and small spatial scale structure at the photosphere severely impact the extrapolation of the field. Preprocessing of the forced photospheric boundary does improve the extrapolations considerably for the layers above the chromosphere, but the extrapolations are sensitive to the details of the numerical codes and neither the field connectivity nor the free magnetic energy in the full volume are well recovered. The magnetic virial theorem gives a rapid measure of the total magnetic energy without extrapolation though, like the NLFFF codes, it is sensitive to the Lorentz forces in the coronal volume. Both the magnetic virial theorem and the Wiegelmann extrapolation, when applied to the preprocessed photospheric boundary, give a magnetic energy which is nearly equivalent to the value derived from the chromospheric boundary, but both underestimate the free energy above the photosphere by at least a factor of two. We discuss the interpretation of the preprocessed field in this context. When applying the NLFFF codes to solar data, the problems associated with Lorentz forces present in the low solar atmosphere must be recognized: the various codes will not necessarily converge to the correct, or even the same, solution. On 07/07/2007, the NLFFF team was saddened by the news that Tom Metcalf had died as the result of an accident. We remain grateful for having had the opportunity to benefit from his unwavering dedication to the problems encountered in attempting to understand the Sun’s magnetic field; Tom had completed this paper several months before his death, leading the team through the many steps described above.     

Planetary perturbations on Mercury’s libration in longitude

Two space missions dedicated to Mercury (MESSENGER and BepiColombo) aim at understanding its rotation and confirming the existence of a liquid core. This double challenge requires much more accurate models for the spin-orbit resonant rotation of Mercury. The purpose of this paper is to introduce planetary perturbations on Mercury’s rotation using an analytical method and to analyse the influence of the perturbations on the libration in longitude. Applying a perturbation theory based on the Lie triangle, we were able to re-introduce short periodic terms into the averaged Hamiltonian and to compute the evolution of the rotational variables. The perturbations on Mercury’s forced libration in longitude mainly come from the orbital motion of Mercury (with an amplitude around 41 arcsec that depends on the momenta of inertia). It is completed by various effects from Jupiter (11.86 and 5.93 year-periods), Venus (with a 5.66 year-period), Saturn (14.73 year-period), and the Earth (6.58 year-period). The amplitudes of the oscillations due to Jupiter and Venus are approximately 33% and 10% of those from the orbital motion of Mercury and the amplitudes of the oscillations due to Saturn and the Earth are approximately 3% and 2%. We compare the analytical results with the solution obtained from the spin-orbit numerical model SONYR.     

Micro‐Raman spectroscopic study of fine‐grained,shock‐metamorphosed rock fragments from the Australasian microtektite layer

Abstract— –Shock‐metamorphosed rock fragments have been found in the Australasian microtektite layer from the South China Sea. Previous X‐ray diffraction (XRD) studies indicate that the most abundant crystalline phases in the rock fragments are coesite, quartz, and a 10 Å phase (mica/clay?). In addition, the presence of numerous other phases was suggested by scanning electron microscopy (SEM) and energy‐dispersive X‐ray (EDX) analysis. In the present research, ten of the rock fragments, which had previously been studied using SEM/EDX, were studied by micro‐Raman spectroscopy. The presence of K‐feldspar, plagioclase, rutile, ilmenite, titanite, magnetite, calcite, and dolomite were confirmed. In addition, the high‐pressure TiO₂ polymorph with an α‐PbO₂ structure (i.e., TiO₂II) was found in several rock fragments. Two grains previously thought to have been zircon, based on their compositions, were found to have Raman spectra that do not match the Raman spectra of zircon, reidite, or any of the possible decomposition products of zircon or their high‐pressure polymorphs. We speculate that the ZrSiO₄ phase might be a previously unknown high‐pressure polymorph of zircon or one of its decomposition products (i.e., ZrO₂ or SiO₂). The presence of coesite and TiO₂ II, and partial melting and vesiculation suggest that the rock fragments containing the unknown ZrSiO₄ phase must have experienced shock pressures between 45 and 60 GPa. We conclude that micro‐Raman spectroscopy, in combination with XRD and SEM/EDX, is a powerful tool for the study of small, fine‐grained impact ejecta.     

The information system of the French Peatland Observation Service: Service National d'Observation Tourbières – A valuable tool to assess the impact of global changes on the hydrology and biogeochemistry of temperate peatlands through long term monitoring

Mitigating and adapting to global changes requires a better understanding of the response of the Biosphere to these environmental variations. Human disturbances and their effects act in the long term (decades to centuries) and consequently, a similar time frame is needed to fully understand the hydrological and biogeochemical functioning of a natural system. To this end, the ‘Centre National de la Recherche Scientifique’ (CNRS) promotes and certifies long-term monitoring tools called national observation services or ‘Service National d'Observation’ (SNO) in a large range of hydrological and biogeochemical systems (e.g., cryosphere, catchments, aquifers). The SNO investigating peatlands, the SNO ‘Tourbières’, was certified in 2011 ( https://www.sno-tourbieres.cnrs.fr/ ). Peatlands are mostly found in the high latitudes of the northern hemisphere and French peatlands are located in the southern part of this area. Thus, they are located in environmental conditions that will occur in northern peatlands in coming decades or centuries and can be considered as sentinels. The SNO Tourbières is composed of four peatlands: La Guette (lowland central France), Landemarais (lowland oceanic western France), Frasne (upland continental eastern France) and Bernadouze (upland southern France). Thirty target variables are monitored to study the hydrological and biogeochemical functioning of the sites. They are grouped into four datasets: hydrology, fluvial export of organic matter, greenhouse gas fluxes and meteorology/soil physics. The data from all sites follow a common processing chain from the sensors to the public repository. The raw data are stored on an FTP server. After operator or automatic processing, data are stored in a database, from which a web application extracts the data to make them available ( https://data-snot.cnrs.fr/data-access/ ). Each year at least, an archive of each dataset is stored in Zenodo, with a digital object identifier (DOI) attribution ( https://zenodo.org/communities/sno_tourbieres_data/ ).