Stratigraphic framework of gas accumulations in the Ría de Pontevedra (NW Spain)

Knowledge of marine geological environments in which shallow gas is accumulating is becoming increasingly important in global studies of climate change because a measurable proportion of the total methane source comes from continental margins. Previous studies have revealed that coastal environments represent important geological environments where microbial methane is being generated, is accumulating, and is being released. In the Ría de Pontevedra, at least 4.5 km² of seafloor in the innermost part of the ría is underlain by sediments containing natural gas. Seismic interpretation contributes new findings for the definition of periods and geological environments in which the gas could have been generated, and is accumulating and released in the Ría de Pontevedra. Groundtruthing the seismic data (facies, environments) makes it possible to identify favourable geological environments for gas generation in the sedimentary infill of the Ría de Pontevedra. Sequence stratigraphy based on high-resolution seismic profiles and post-Last Glacial Maximum sea-level records makes it possible to establish the stratigraphic architecture of the ría and to define the periods in which gas could have been generated. The results of this study show that the sedimentary infill is composed of a fifth-order sequence developed since the Last Glacial Maximum. Within this sequence, gas appears to have accumulated in the Holocene deposits associated with the latest transgressive and highstand system tracts. Seismic analysis shows that gas could have been generated in different geological environments in the Ría de Pontevedra. If coastal environments at times of lower sea level were similar to those of the present, organic-rich mud deposits (deposited mainly in lakes, estuaries and floodplains) could have survived transgression and remained buried as potential gas sources in the inner part of the ría.     

A comparison of Hα and soft X-ray characteristics of spotless and spot group flares

A comparative analysis of spotless and spot group flares recorded at Hvar and Kanzelhöhe Observatories during the 21st cycle of solar activity is presented. The rate of occurrence of two-ribbon flares was found to be significantly higher for the spotless flares. In comparison with spot group flares of corresponding H importance, the soft X-ray peak values have been systematically lower for the spotless flares. The highest peak values and the energy released in soft X-rays was found for flares with a H ribbon protruding over a major spot umbra. It was found that the effective plasma temperatures in spotless flares have been considerably lower than the temperatures in spot group flares.     

The Bayesian detection of discontinuities in a polynomial regression and its application to the cycle-slip problem

This paper deals with the problem of detecting and correcting cycle-slips in Global Navigation Satellite System (GNSS) phase data by exploiting the Bayesian theory. The method is here applied to undifferenced observations, because repairing cycle-slips already at this stage could be a useful pre-processing tool, especially for a network of permanent GNSS stations. If a dual frequency receiver is available, the cycle-slips can be easily detected by combining two phase observations or phase and range observations from a single satellite to a single receiver. These combinations, expressed in a distance unit form, are completely free from the geometry and depend only on the ionospheric effect, on the electronic biases and on the initial integer ambiguities; since these terms are expected to be smooth in time, at least in a short period, a cycle-slip in one or both the two carriers can be modelled as a discontinuity in a polynomial regression. The proposed method consists in applying the Bayesian theory to compute the marginal posterior distribution of the discontinuity epoch and to detect it as a maximum a posteriori (MAP) in a very accurate way. Concerning the cycle-slip correction, a couple of simultaneous integer slips in the two carriers is chosen by maximazing the conditional posterior distribution of the discontinuity amplitude given the detected epoch. Numerical experiments on simulated and real data show that the discontinuities with an amplitude 2 or 3 times larger than the noise standard deviation are successfully identified. This means that the Bayesian approach is able to detect and correct cycle-slips using undifferenced GNSS observations even if the slip occurs by one cycle. A comparison with the scientific software BERNESE 5.0 confirms the good performance of the proposed method, especially when data sampled at high frequency (e.g. every 1 s or every 5 s) are available.     

Spin rate estimation of sounding rockets using GPS wind-up

Carrier phase wind-up is a well-known effect that arises from the relative rotation between a transmitting and receiving antenna. In GPS measurements at L1 frequency, this effect translates into an error of 19.029 cm per full relative rotation of antennas. Since this effect is independent of the satellite elevation for pure rotation about the antenna boresight axis, it is usually absorbed by the clock estimation in navigation algorithms. Therefore, the impact of wind-up is usually neglected for applications that do not require accuracies to the cm level like RTK. However, in receiving platforms with high rotation rate, the accumulated wind-up value can be important and actually be larger than receiver noise or even ionospheric variations. Therefore, in such scenarios, the wind-up contribution can be isolated and used as a source of information to compute the spin rate of such platforms using an appropriate combination of GPS observables. This work shows some results of a coarse, yet simple, approach to monitor the rotation angle and spin-rate of spin stabilized sounding rockets flown by DLR.     

Modelling Positional Uncertainty of Line Features by Accounting for Stochastic Deviations from Straight Line Segments

The assessment of positional uncertainty in line and area features is often based on uncertainty in the coordinates of their elementary vertices which are assumed to be connected by straight lines. Such an approach disregards uncertainty caused by sampling and approximation of a curvilinear feature by a sequence of straight line segments. In this article, a method is proposed that also allows for the latter type of uncertainty by modelling random rectangular deviations from the conventional straight line segments. Using the model on a dense network of sub‐vertices, the contribution of uncertainty due to approximation is emphasised; the sampling effect can be assessed by applying it on a small set of randomly inserted sub‐vertices. A case study demonstrates a feasible way of parameterisation based on assumptions of joint normal distributions for positional errors of the vertices and the rectangular deviations and a uniform distribution of missed sub‐vertices along line segments. Depending on the magnitudes of the different sources of uncertainty, not accounting for potential deviations from straight line segments may drastically underestimate the positional uncertainty of line features.     

Presence of Hippidion at two sites of western Argentina: Diet composition and contribution to the study of the extinction of Pleistocene megafauna

The composition of Hippidion diet, and possible changes that could relate to its extinction, were evaluated in the Argentinean-Chilean Central Andes, a Neotropical environment characterized by arid to semiarid conditions (Andean hot and cold deserts). Microhistological analyses were made on feces of Hippidion found at Los Morrillos (31°43′S–68°42′W, 3000 m a.s.l.) and Gruta del Indio (34°35′S, 68°22′W, 660 m a.s.l.). At Gruta del Indio the diet of Hippidion was based mainly on woody species. At Los Morrillos, it was based on herbaceous species.This flexibility in diet composition could be a relative adaptive advantage allowing a longer permanence of this species in comparison to others recorded in the region (such as Megatheriumand Mylodon). Nevertheless, this advantage was not enough to guarantee its survival during the Holocene. Extinction could have been affected by diverse agents, such as growing aridification of the area, increasing competition with other species (mainly Lama guanicoe), and human presence, along with a relatively low population density (as expected from the limited presence of Hippidion at the archaeological and palaeontological sites of South America. At Gruta del Indio significant changes in the diet of Hippidion corresponding to different intervals of the period 31,000–9000 ¹⁴C BP are not evident. Given this evidence for similar diets for Hippidion throughout the late Quaternary, other factors need to be considered to explain the extinction of this horse.     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.     

Water balance in the playa-lakes of an arid environment,Monegros, NE Spain

The playa-lakes of the Monegros desert in north-east Spain are saline wetlands in an arid environment, a rare phenomenon in Europe. These extremely valuable habitats are threatened by changes associated with agricultural expansion and incorporation of new irrigated areas. An understanding of the present hydrologic regime will enable changes to be identified, particularly those brought about by flooding and pollution caused by irrigation surplus. This study sets out to show the results of applying a daily water balance in three selected playa-lakes. The balance was in two parts and consisted of: (1) the average balance for all the endorheic basin using the BALAN_11 program, and (2) the water balance in some playa-lakes, applying discharge flows obtained from the previous balance. The resulting volumes of water were converted to water depths and contrasted with reference volumes taken from field and Landsat images. The model was calibrated by applying various hypotheses of function which enabled the results to be adjusted. The proposed balance is an acceptable reproduction of field water measurements during this period, and underlines the consistency of the conceptual model. The methodology used is appropriate for understanding the playa-lakes function and for monitoring them for conservation purposes.