Carbonatation processes at the El Berrocal natural analogue granitic system (Spain): inferences from mineralogical and stable isotope studies

The El Berrocal granite/U-bearing quartz vein system has been studied as a natural analogue of a high-level radioactive waste repository. The main objective is to understand the geochemical behaviour of natural radionuclides occurring under natural conditions. In this framework, the carbonatation processes have been studied from a mineralogical and isotopic ( and ) point of view, since carbonate anions are powerful complexing agents for U(VI) under both low-temperature hydrothermal and environmental conditions. The carbonatation processes in the system are identified by the presence of secondary ankerite, with minor calcite, scattered in the hydrothermally altered granite, and Mn calcite in fracture filling materials. The isotopic signatures of these carbonates lead us to conclude that ankerite and calcite from the former were formed at the end of the same hydrothermal process that altered the granite, at a temperature range of between 72° and 61°C for ankerite, and between 52° and 35°C for calcite. The effect of edaphic CO₂ on both carbonates, greater on calcite than on ankerite, is demonstrated. Calcites from fracture fillings are, at least, binary mixtures, in different proportions, of hydrothermal calcite, formed between 25° and <100°C, and supergenic calcite, formed at ≤25°C. According to their signatures, the effect of edaphic CO₂ in both calcites is also evident. It is assumed that: (i) hydrothermal calcite from fracture fillings and ankerite from the hydrothermally altered granite are the result of the same hydrothermal process, their chemical differences being due to the intensity of the water/rock interaction which was stronger in the altered granite than in the fractures; and (ii) all of these carbonatation processes are responsible for ancient and recent migration/retention of uranium observed in the hydrothermally altered granite and fracture fillings.     

Sequence stratigraphy of Holocene incised-valley fills and coastal evolution in the Gulf of Cádiz (southern Spain)

This first sedimentary interpretation of two incised-valley fills in the Gulf of Cádiz (southern Spain), which accumulated during the last fourth-order eustatic cycle in response to fluvial incision, changes of sea level, and correlative deposition, relates the filling of the estuarine basins and their barriers with four regional progradation phases, H₁ to H₄. The cases studied are the wave-dominated Guadalete, and the mixed, tide and wave-dominated Odiel-Tinto estuaries. The sequence boundary is a type-1 surface produced during the lowstand of the Last Glacial period ca. 18 000 ¹⁴C yr BP. No fluvial lowstand deposits were found in the area. Due to rapid transgression the valley fills consist of transgressive and highstand sediments. The maximum landward advance of the estuarine barriers occurred ca. 6500–6000 ¹⁴C yr BP during the maximum of the Flandrian transgression, but there is no evidence of sea level rising appreciably above the present. A large part of the estuaries was filled during H₁ (ca. 6500–4400 ¹⁴C yr BP) but ravinement by shifting tidal inlets destroyed most of the coeval barriers. During the H₂ phase (ca. 4200–2550 ¹⁴C yr BP) sedimentation was favoured by arid conditions and concentrated in the axial estuarine zones and the barriers. Between H₂ and H₃ prevailing winds changed from W to WSW, increasing spit growth to the east and south-east. Progradation of bay-head deltas and flood-plains during H₃ (ca. 2300–800 ¹⁴C yr BP) and H₄ (500 yr ago to the present) further reduced the accommodation space in the largely-filled valleys, and sediment by-passed the estuaries and accumulated in the estuarine barriers as fast-growing spits. Arid conditions and increasing human activity have caused rapid coastal modifications.     

基于GIS的证据权重法矿产预测系统(EWM)

探讨了ＧＩＳ的主要功能、ＧＩＳ在矿产预测中的应用、证据权重法的理论基础,并在Ｗｉｎｄｏｗｓ９５环境下,建立了基于ＧＩＳ的证据权重法矿产预测系统———ＥＷＭ。     

准噶尔盆地东北缘早石炭世南明水组沉积环境及构造背景分析

准噶尔盆地东北缘发育的下石炭统南明水组沉积岩是对晚古生代北疆地区洋壳俯冲消减作用的沉积响应。本次研究在南明水组地层中发现丰富的遗迹化石:Scalarituba, Planolites,Cosmorhaphe,Spirophycus和Helminthoida。岩性组合特征和遗迹化石所代表的遗迹相,反映了南明水组的主要沉积相类型为扇三角洲前缘、浅海、深海-半深海,从下往上为一个由浅变深再变浅的不对称的完整层序。南明水组的岩性、层序演化以及砂、泥岩地球化学特征表明,该套地层发育的构造背景为弧后盆地。早石炭世准噶尔盆地东部存在的洋壳俯冲消减作用是研究区弧后盆地发育的动力机制。     

A macroscopic damage‐plastic constitutive law for modeling quasi‐brittle fracture and ductile behavior of concrete

A new phenomenological macroscopic constitutive model for the numerical simulation of quasi‐brittle fracture and ductile concrete behavior, under general triaxial stress conditions, is presented. The model is particularly addressed to simulate a wide range of confinement stress states, as also, to capture the strong influence of the mean stress value in the concrete failure mechanisms. The model is based on a two‐surface damage‐plastic formulation. The mechanical behavior in different domains of the stress space is separately described by means of a quasi‐brittle or ductile material response:

相似文献   

The 2011 submarine volcanic eruption in El Hierro (Canary Islands)

Forty years after the Teneguía Volcano (La Palma, 1971), a submarine eruption took place off the town of La Restinga, south of El Hierro, the smallest and youngest island of the Canarian Archipelago. Precursors allowed an early detection of the event and its approximate location, suggesting it was submarine. Uncertainties derived from insufficient scientific information available to the authorities during the eruption, leading to disproportionate civil protection measures, which had an impact on the island's economy—based primarily on tourism—while residents experienced extra fear and distress.     

In Situ Determination of Au and Cu in Natural Pyrite by Near‐Infrared Femtosecond Laser Ablation‐Inductively Coupled Plasma‐Quadrupole Mass Spectrometry: No Evidence for Matrix Effects

Gold and copper concentrations were determined in natural pyrite by near‐infrared femtosecond LA‐ICP‐QMS, using both sulfide reference materials (pyrrhotite Po‐726 and in‐house natural chalcopyrite Cpy‐RM) and NIST SRM 610 as external calibrators. Firstly, using NIST SRM 610 as the external calibrator, we calculated the Au concentration in Po‐726 and the Cu concentration in Cpy‐RM. The calculated concentration averages for Au and Cu were similar to the values published for Po‐726 and Cpy‐RM, respectively. Secondly, we calculated Au and Cu concentrations taking NIST SRM 610 as an unknown sample and using Po‐726 and Cpy‐RM as external calibrators. Again, the average values obtained closely reflected the preferred concentrations for NIST SRM 610. Finally, we calculated Au and Cu concentrations in natural pyrite using sulfide and silicate reference materials as external calibrators. In both cases, calculated concentrations were very similar, independent of the external calibrator used. The aforementioned data, plus the fact that we obtained very small differences in relative sensitivity values (percentage differences are between 5% and 17% for ⁵⁷Fe, ⁶³Cu and ¹⁹⁷Au) on analyses of silicate and sulfide RMs, indicate that there were no matrix effects related to the differences in material composition. Thus, it is possible to determine Au and Cu in natural sulfides using NIST silicate glasses as an external calibrator.     

Fluid inclusion studies in datolite of low grade metamorphic origin from a Jurassic pillow basalt series in northeastern Hungary

The Jurassic pillow basalt blocks in the Szarvask? Unit in the SW-Bükk Mountains are incorporated into an accretionary mélange of Cretaceous age which had been displaced from the Dinarides to NE-Hungary during the Alpine-Carpathian collision. The pillow basalt series is a part of an incomplete remnant of an ophiolite-like sequence from which ultramafic units and sheeted dikes are almost completely absent. At the studied Egerbakta quarry, closely packed pillow, pillow fragmented hyaloclastite breccia and peperitic facies of submarine basaltic volcanism were recognized. Peperitic facies was formed by local admixture of unconsolidated siliciclastic sediment into the basaltic lava. Basaltic pillows contains short and thin prehnite-chlorite-carbonate-quartz veins formed during the interaction of seawater with the cooling lava, as well as cross-cutting datolite-prehnite-quartzchlorite-albite bearing veins. Calcite in the short cooling cracks crystallised from upheated seawater at around 160°C temperature and 0.5?C0.6 kbar pressure (water depth of about 5?C6 km). Datolite precipitations in veins can be classified into at least three different textural-morphological types but all of them contain methane bearing primary fluid inclusion assemblages, with variable methane/water ratios, suggesting an inhomogeneous entrapment from a heterogeneous aqueous-carbonic fluid. End member primary fluid inclusions contain aqueous liquid with methane rich vapour phase and apparently methane only inclusions characterized by liquid phase on room temperature. A combination of results from fluid inclusion microthermometry, Raman spectroscopy (used not only for phase identification but also for determination of salinities) and temperatures calculated from chlorite compositions, show that the precipitation of datolite had taken place from low salinity (0.2?C2 NaCl equiv. mass%) aqueous-methane fluids under increasing temperature and pressure (from 160 to 210°C, and from 0.6 to 1.1 kbar) conditions. The elevated pressures and temperatures in comparison to the submarine hydrothermal processes suggest that the datolite bearing mineral parageneses had been formed during the progression of Alpine very low grade metamorphic processes.     

Palaeoshoreline for the Late Cretaceous marine platform in the Iberian Trough (Leonese Area, Spain) deduced from outcrop and subsurface analysis

The location of the Late Cretaceous paleoshoreline in the Leonese Area (Iberian Trough, Spain) has been investigated by seismic analysis through isobath and isopach maps. The succession can be divided into two depositional sequences: DS-1 and DS-2. These sequences are composed of fluvial systems at the base, with paleocurrents that flowed eastward and north-eastward. The DS-1 sequence (Late Albian-Middle Turonian) shows intertidal to subtidal and offshore deposits at the top, while the DS-2 sequence (Late Turonian-Campanian) presents intertidal to subtidal, tidal flat and shallow marine and lacustrine deposits at its top. The stratigraphic cyclicity based on systems tracts shows that these two depositional sequences exhibit remarkable eustatic control. Both sequences start at the base with a significant sedimentary supply from fluvial systems, related to eustatic fall episodes, and conclude at the top with transgressive periods. The evolution of the basin reveals the history of base-level changes and associated shifts in depositional trends during successive stages. The deeper sectors of the DS-1 sequence are located towards the northeastern part of the study area while the proximal portion of the basin-margin is located to the southwest. The paleoshoreline is placed in a direction oriented at 120. The variations in thickness are elongated in orientations between 030 and 050 and are mainly related to paleovalleys and tributary fluvial networks that supply sediment through the shoreline. It is possible that these variations may be related to active synsedimentary faults. Depocenters move toward the northeast and east during the DS-2 sequence while the proximal portion of the basin-margin moves to the southwest. The paleoshoreline has an orientation of 155 direction and moves basinward. The isopach maps show a group of corridors oriented at 130?C140 and 165?C170, interpreted as result of accumulation of sandy bodies such as inter and subtidal bars. The fluvial systems are transversal to the paleoshoreline direction.