Rainfall over Oman and its teleconnection with El Niño Southern Oscillation

The Sultanate of Oman is located in the south-eastern part of the Arabian Peninsula and covers the larger part of the southern coasts of the Arabian Peninsula in both arid and semi-arid environments except for the southern part which is swept by the monsoon affecting the Arabian Sea during the period from June to September. The summer rainfall over Oman shows year-to-year variability, and this is caused by oceanic and atmospheric influences. In the present study, we tried to explore the influence of El Niño on the rainfall over Oman using different data sets. The empirical orthogonal function (EOF) technique employed to the zonal wind at 850 hPa for the 30-year period shows that the second and third modes of EOF are showing high variability over the Oman regions. The corresponding PCs were subjected to FFT analysis, and it showed a peak about 5–6 years. In addition to this, the zonal wind over the Oman regions is correlated with the global zonal wind and found a significant correlation (1 % significant level). It has already been proved that the wind and rainfall during summer monsoon is in phase. Moreover, the spectral analysis of rainfall at Masirah station and the Niño3.4 index show the similar mode of variability indicating a direct relationship. The correlation between rainfall and the Niño3.4 index is also showing a positive significant value, and therefore, it can be concluded that the El Niño in the Pacific favours rainfall over the Oman region.     

Multichannel analysis of surface waves (MASW) for seismic site characterization using 2D genetic algorithm at Bahrah area,Wadi Fatima,Saudi Arabia

The present study deals with the seismic site classification of Bahrah area, Wadi Fatima, to characterize the local site conditions. The dynamic behavior of sediments was studied by the application of surface wave inversion. The multichannel analysis of surface waves (MASW) shallow geophysical technique was utilized for site classification. MASW survey was carried out at 66 sites along with 13 seismic refraction profiles at suitable localities. MASW and seismic refraction profiles were processed and compared with the available borehole data. The integration of MASW techniques with seismic refraction and borehole data progressively enhanced the subsurface visualization and reliability of the shear wave velocity estimation in the subsurface in the study area. The subsurface shear-wave velocity model was achieved by the solution of an inverse problem-based dispersion of surface waves and propagation in a vertically heterogeneous medium. The 2D genetic algorithm was employed for the inversion of dispersion curves to obtain velocity and thickness of subsurface layers. The depth to engineering bedrock and velocity of shear waves in the first 30 m was deciphered and mapped. The depth of bedrock in study area varies from 4 to 30 m, and V _{S 30} ranges from 320 to 800 m/s. The most of study area falls in B and C class categories in addition to few sites of D class according to the NEHRP guidelines.     

Assessing groundwater storage changes in the Nubian aquifer using GRACE data

Gravity Recovery and Climate Experiment (GRACE) level two (L2) data is used in estimating the groundwater storage changes (GWSC) in the Nubian Sandstone Aquifer System (NSAS). This set of data consists of spherical harmonics coefficients with specific degree and order. The GRACE data is de-correlated using a sixth degree polynomial in order to reduce the effect of the noise error resulting from the correlation between the spherical harmonics coefficients with the same degree parity. The GRACE estimates of GWSC are smoothed using Gaussian filter with half width of 1000 km. This half width is chosen in order to maximize the correlation between the GRACE estimates of GWSC and previous modeling results of the NSAS. The loss in groundwater storage occurring in each of the four countries sharing the NSAS is calculated to assess the sustainability of using the NSAS as a water resource in each country. The overarching finding in this study is that NSAS is losing its groundwater storage at a very high rate. Also, it is found that Egypt is the fastest in losing its groundwater storage from the NSAS. This loss of groundwater storage in Egypt may not necessarily be resulting from in-country extractions because of the trans-boundary nature of this aquifer. The GRACE-based estimates are found to be close to available data and previous modeling results of the NSAS.     

Groundwater potential assessment in a sedimentary terrain,southwestern Nigeria

Geoelectrical resistivity techniques are increasingly being applied in addressing a wide range of hydrological, environmental, and geotechnical problems. This is due to their effectiveness in near-surface characterization. In the present study, a suite of vertical electrical soundings (VESs) was integrated with 2D geoelectrical resistivity and time-domain induced polarization (IP) imaging to characterize the near-surface and delineate the underlying aquifer in a sedimentary terrain. The geophysical survey was conducted as part of preliminary studies to evaluate the potential of groundwater resource in Iyana-Iyesi and Canaan Land area of Ota, southwestern Nigeria. A high-yield confined sandy aquifer overlain by a low-yield aquitard was delineated; overlying the aquitard is a very resistive and thick layer that is predominantly composed of kaolinitic swelling clay intercalated with phosphate mineral.     

Coal-measure source rock characteristics and burial evolution history in the Shisanjianfang Area,Tuha Basin

Shisanjianfang Area in the eastern margin of Taibei Sag, Tuha Basin, is an important region for oil and gas exploration. In this study, a large number of source rock geochemical data were used to analyze the geochemical characteristics of coal-measure source rocks in the Shisanjianfang Area, Tuha Basin, from three aspects, i.e., organic matter abundance, organic matter type, and organic maturity. The results show that the Jurassic Xishanyao Formation (J₂x) in the study area has great thickness, continuous distribution, and high source rock maturity, and is the major source rock horizon in the study area. The seismic data are used in combination with 1D and 2D basin simulation technology to study the distribution characteristics of the source rocks in Shisanjianfang Area. The results of the simulation research on the source rock maturity history in the study area indicate the following: (1) The source rocks in the Xishanyao Formation (J₂x) have a hydrocarbon generation threshold depth of 1800 m, threshold temperature of 95 °C, and hydrocarbon generation threshold time of about 162 Ma. (2) The Xishanyao Formation (J₂x) has a current formation temperature of 50~110 °C and Ro of 0.6~1.1 % in the peak oil generation stage. (3) The source rock maturity in the study area is shown as being higher in the west while lower in the east, and higher in the north while lower in the south, and the favorable exploration area mainly lies in the northwest of the study area. The results of this study could have important implications for the oil and gas exploration in the margins of Xiaocaohu Sag, Tuha Basin.     

Complexity measurement of regional groundwater resources system using improved Lempel-Ziv complexity algorithm

In this paper, the self-adaptive artificial fish swarm algorithm (SAAFSA) is used to optimize the coarse graining of segment numbers, which are used in the Lempel-Ziv complexity algorithm. This approach improves the Lempel-Ziv complexity (LZC) algorithm of equal probability coarse graining. As a case study, the complexities of monthly series of groundwater depth were analyzed at seven farms in the Hongxinglong Administration. GIS technology was used to create spatial distributions of monthly groundwater depths. A projection pursuit model based on the SAAFSA was established and used for complexity attribution analysis at selected farms with different degrees of complexity. The three selected farms, Hongqiling, 852, and Youyi, each represent a certain degree of complexity. Further analysis shows that precipitation, evaporation, temperature, and human activities are the primary factors that cause complexity variations in local groundwater depth. The results reveal the evolution of the complexity characteristics of local groundwater depth and provide scientific evidence for the need to effectively allocate regional water resources. Additionally, the proposed method can be applied in complexity analyses of other hydrologic features, as well as in research regarding nonlinear time series in economic, engineering, medical, and signal analyses.     

Facies analysis and sequence stratigraphy of Kometan Formation (Upper Cretaceous) in the imbricated zone,northeastern Iraq

Facies and sequence stratigraphic analysis of the Kometan Formation (Upper Cretaceous) were studied from Kometan village, Kurdistan region of northeastern Iraq. Lithologically, the formation consists of 44 m of white weathering, light grey, thin to medium-bedded highly fractured limestones with chert nodules. Petrographic study of the carbonates shows that both skeletal and non-skeletal grains were present. The skeletal grains include a variety of planktonic foraminifera (including Oligostegina), calcispheres, ostracods, pelecypods, larva ammonite, and echinoderms. Non-skeletal grains include peloids only. Three main microfacies types are distinguished in the studied formation. The results of stable carbon and oxygen isotopes of the studied carbonate samples show negative values of δ¹⁸O. These indicate that the seawater was warm with low salinity during precipitation of the carbonates in the Kometan Formation in northeastern Iraq. The positive δ¹³C values of carbonate samples, in the middle part of the formation, reflect the widespread deposition of organic-rich marine sediments during a transgression and deepening of the basin. Petrographic, facies and stable isotopic analyses revealed that the Kometan Formation was deposited in a warm, basinal, pelagic (open marine) environment with low salinity. The Kometan Formation consists of one complete third-order depositional sequence, separated by a sequence boundary (SB) of type 2. The third-order sequence is subdivided into a transgressive systems tract (TST) and highstand systems tract (HST). This reflects episodes of transgression and still stands of the relative sea level. The TSTs are topped by maximum flooding surface (MFS) characterized by deepening-/fining-upward parasequences implying a retrogradational stacking pattern. The HST is marked by shallowing-/coarsening-upward parasequences implying a progradational stacking pattern.     

Using cloud water path and cloud top temperature for estimating convective and stratiform rainfall from SEVIRI daytime data

A satellite rainfall retrieval technique is proposed here. The relationships of rain rate with each of cloud water path (CWP) and cloud top temperature (CTT) are investigated. The CWP and CTT are retrieved from SEVIRI data (spinning enhanced visible and infrared imager), and corresponding rain rates are measured by weather radar. The rain rates are compared to corresponding CWP and then to corresponding CTT. The investigation demonstrates an exponential functional dependency between rain rates and CWP for low and moderate rain rates (stratiform rainfall). Conversely, the rain rates are more closely related to CTT for high rain rates (convective rainfall). Therefore, two separate relationships are established for rain rate retrievals. The results show rain rates estimated by the developed scheme are in good correlation with those observed by weather radar.     

Regional debris flow susceptibility analysis based on principal component analysis and self-organizing map: a case study in Southwest China

A method was developed to analyze the susceptibilities of 541 regional basins affected by debris flows at the Wudongde Dam site in southwest China. Determining susceptibility requires information on source material quantity and occurrence frequency. However, the large number of debris flows can hinder the individual field investigation in a each small basin. Factors that may trigger debris flows can be identified using remotely sensed interpretation information. Susceptibility analysis can then be conducted based on these factors. In this study, SPOT5 satellite imagery, digital elevation models (DEM), a lithology distribution map, and rainfall monitoring data were used to identify 12 debris flow trigger factors: basin relief ratio, slope gradient in the initiation zone, drainage density, downslope curvature of the main channel, vegetation coverage, main channel aspect, topographic wetness index, Melton’s ruggedness number, lithology, annual rainfall, form factor, and cross-slope curvature of the transportation zone. Principal component analysis was used to obtain the eight principal components of these factors that contribute to susceptibility results. Then, a self-organizing map method was adopted to analyze the principal components, which resulted in a debris flow susceptibility classification. Field validation of 26 debris flow basins was used to evaluate the errors of the susceptibility classification, as well as assess the causes of such errors. The study found that principle component analysis and self-organizing map methodologies are good predictors of basin susceptibility to debris flows.