Ontogenic shifts in predatory roles involving two invasive species

The red swamp crayfish, Procambarus clarkii, and the eastern mosquitofish, Gambusia holbrooki have been introduced worldwide, but the interactions between these invasive species are not well known. The effects of crayfish presence, crayfish size and water depth on the consumption of G. holbrooki by P. clarkii were analyzed, as were the effects of mosquitofish presence and water depth on the consumption of recently hatched crayfish (RHC) by mosquitofish. To better understand this subject we conducted aquaria and open air mesocosm experiments simulating a rice field section. Aquarium experiments showed that P. clarkii consumes G. holbrooki and that G. holbrooki consumes RHC. Adult crayfish size did not significantly affect the consumption of mosquitofish and water depth had no effect on the consumption of G. holbrooki by P. clarkii and vice versa. In the outdoor mesocosm experiments P. clarkii caused no statistically significant effect on G. holbrooki numbers or biomass when compared with controls without crayfish. In spite of this, the analysis of crayfish stomach contents clearly demonstrated that several G. holbrooki individuals were consumed, indicating that crayfish can profit from the presence of G. holbrooki. Results from our study suggest that in shallow pools there are strong interactions between the two invasive species since adult crayfish predate mosquitofish and mosquitofish predate recently hatched crayfish. Therefore, there are bidirectional trophic interactions between these invasive species which change depending on their relative size. We believe that these interactions should become more relevant in confined areas such as small shallow pools formed during the late summer and autumn.     

Efficient conceptual model for simulating the effect of aquifer heterogeneity on natural groundwater discharge to rivers

When linearity can be assumed (linear response of heads to stresses), stream–aquifer flow exchange can be simulated as the drainage of a number of independent linear reservoirs. This conceptual model, which can be mathematically deduced in a univocal way from an eigenvalue solution of the linear groundwater flow problem, facilitates the understanding of the physical phenomenon and the analysis of influencing factors. The number of reservoirs required to simulate stream depletion in some ideal homogeneous cases of stream–aquifer connection was analyzed in detail in a previous investigation using analytical eigenvalue solutions [16]. However, most aquifers are heterogeneous in nature and numerical solutions must be employed to analyze whether they could also be simulated using few reservoirs. This paper presents a stochastic analysis of the influence of heterogeneity on the simulation of natural groundwater discharges in aquifers connected to rivers, as a series of linear reservoirs. A Monte-Carlo approach was employed to perform this study. The results show that, on a monthly time scale, many cases (even heterogeneous aquifers) can be simulated using just a few reservoirs with sufficient accuracy and at minimum computational cost. Therefore, this modeling technique can be useful to efficiently simulate the integrated management of complex water resources systems at the basin scale (with many aquifers, reservoirs, demands, etc.) that need to simultaneously consider surface and groundwater flow and stream–aquifer interaction.     

Conceptual problems with remote element synthesis

The notion of remote element synthesis has recently been modified to explain the presence of nucleogenetic isotopic anomalies and decay products of short-lived nuclides by injection of a small amount ofexotic nucleogenetic material. Even with this modification, remote element synthesis seems inconsistent with the following observations:

EVA: GPS-based extended velocity and acceleration determination

In this work, a new GPS carrier phase-based velocity and acceleration determination method is presented that extends the effective range of previous techniques. The method is named ‘EVA’, and may find applications in fields such as airborne gravimetry when rough terrain or water bodies make difficult or impractical to set up nearby GPS reference receivers. The EVA method is similar to methods such as Kennedy (Precise acceleration determination from carrier phase measurements. In: Proceedings of the 15th international technical meeting of the satellite division of the Institute of Navigation. ION GPS 2002, Portland pp 962–972, 2002b) since it uses L1 carrier phase observables for velocity and acceleration determination. However, it introduces a wide network of stations and it is independent of precise clock information because it estimates satellite clock drifts and drift rates ‘on-the-fly’, requiring only orbit data of sufficient quality. Moreover, with EVA the solution rate is only limited by data rate, and not by the available precise satellite clocks data rate. The results obtained are more robust for long baselines than the results obtained with the reference Kennedy method. An advantage of being independent of precise clock information is that, beside IGS Final products, also the Rapid, Ultra-Rapid (observed) and Ultra-Rapid (predicted) products may be used. Moreover, the EVA technique may also use the undifferenced ionosphere-free carrier phase combination (LC), overcoming baseline limitations in cases where ionosphere gradients may be an issue and very low biases are required. During the development of this work, some problems were found in the velocity estimation process of the Kennedy method. The sources of the problems were identified, and an improved version of the Kennedy method was used for this research work. An experiment was performed using a light aircraft flying over the Pyrenees, showing that both EVA and the improved Kennedy methods are able to cope with the dynamics of mountainous flight. A RTK-derived solution was also generated, and when comparing the three methods to a known zero-velocity reference the results yielded similar performance. The EVA and the improved-Kennedy methods outperformed the RTK solutions, and the EVA method provided the best results in this experiment. Finally, both the improved version of the Kennedy method and the EVA method were applied to a network in equatorial South America with baselines of more than 1,770 km, and during local noon. Under this tough scenario, the EVA method showed a clear advantage for all components of velocity and acceleration, yielding better and more robust results.     

Comparing generalized Pareto models fitted to extreme observations: an application to the largest temperatures in Spain

In this paper, a subsampling-based testing procedure for the comparison of the exceedance distributions of stationary time series is introduced. The proposed testing procedure has a number of advantages including the fact that the assumption of stationary can be relaxed for some specific forms of non-stationary and also that the two time series are not required to be independently-generated. For this purpose, a test based on the Kolmogorov–Smirnov and the L ₁-Wasserstein distances between generalized Pareto distributions is introduced and studied in some detail. The performance of the testing procedure is illustrated through a simulation study and with an empirical application to a set of data concerning daily maximum temperature in the 17 autonomous communities of Spain for the period 1990–2004. The autonomous communities were clustered according to the similarities of the fitted generalized Pareto models and then mapped. The cluster analysis reveals a clear distinction between the four northeast communities on the shores of the Bay of Biscay (which are the regions exhibiting milder temperatures) and the remaining regions. A second cluster corresponds to the southern Mediterranean area and the central region which corresponds to the communities with highest temperatures.     

Provenance of Holocene beach sand in the Western Iberian margin: the use of the Kolmogorov–Smirnov test for the deciphering of sediment recycling in a modern coastal system

Detrital zircons from Holocene beach sand and igneous zircons from the Cretaceous syenite forming Cape Sines (Western Iberian margin) were dated using laser ablation – inductively coupled plasma – mass spectrometry. The U–Pb ages obtained were used for comparison with previous radiometric data from Carboniferous greywacke, Pliocene–Pleistocene sand and Cretaceous syenite forming the sea cliff at Cape Sines and the contiguous coast. New U–Pb dating of igneous morphologically simple and complex zircons from the syenite of the Sines pluton suggests that the history of zircon crystallization was more extensive (ca 87 to 74 Ma), in contrast to the findings of previous geochronology studies (ca 76 to 74 Ma). The U–Pb ages obtained in Holocene sand revealed a wide interval, ranging from the Cretaceous to the Archean, with predominance of Cretaceous (37%), Palaeozoic (35%) and Neoproterozoic (19%) detrital‐zircon ages. The paucity of round to sub‐rounded grains seems to indicate a short transportation history for most of the Cretaceous zircons (ca 95 to 73 Ma) which are more abundant in the beach sand that was sampled south of Cape Sines. Comparative analysis using the Kolmogorov–Smirnov statistical method, analysing sub‐populations separately, suggests that the zircon populations of the Carboniferous and Cretaceous rocks forming the sea cliff were reproduced faithfully in Quaternary sand, indicating sediment recycling. The similarity of the pre‐Cretaceous ages (>ca 280 Ma) of detrital zircons found in Holocene sand, as compared with Carboniferous greywacke and Pliocene–Pleistocene sand, provides support for the hypothesis that detritus was reworked into the beach from older sedimentary rocks exposed along the sea cliff. The largest percentage of Cretaceous zircons (<ca 95 Ma) found in Holocene sand, as compared with Pliocene–Pleistocene sand (secondary recycled source), suggests that the Sines pluton was the one of the primary sources that became progressively more exposed to erosion during Quaternary uplift. This work highlights the application of the Kolmogorov–Smirnov method in comparison of zircon age populations used to identify provenance and sediment recycling in modern and ancient detrital sedimentary sequences.     

Quantifying the rate and depth dependence of bioturbation based on optically‐stimulated luminescence (OSL) dates and meteoric 10Be

Both the rate and the vertical distribution of soil disturbance modify soil properties such as porosity, particle size, chemical composition and age structure; all of which play an important role in a soil's biogeochemical functioning. Whereas rates of mixing have been previously quantified, the nature of bioturbation's depth dependence remains poorly constrained. Here we constrain, for the first time, the relationship between mixing rate and depth in a bioturbated soil in northeast Queensland, Australia using a novel method combining OSL (optically‐stimulated luminescence) ages and meteoric beryllium‐10 (¹⁰Be) inventories. We find that the best fit mixing rate decreases non‐linearly with increasing soil depth in this soil and the characteristic length scale of 0.28 m over which the mixing coefficient decays is comparable to reported rooting depth coefficients. In addition we show that estimates of surface mixing rates from OSL data are highly dependent on erosion rate and that erosion rate must be constrained if accurate mixing rates are to be quantified. We calculate surface diffusion‐like mixing coefficients of 1.8 × 10^?4 and 2.1 × 10^?4 m² yr^?1 for the studied soil for two different estimates of soil erosion. © 2014 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.     

Process length variation of the cyst of the dinoflagellate Protoceratium reticulatum in the North Pacific and Baltic‐Skagerrak region: calibration as an annual density proxy and first evidence of pseudo‐cryptic speciation

Process length variation of cysts of the dinoflagellate Protoceratium reticulatum (Claparède et Lachmann) Bütschli in surface sediments from the North Pacific was investigated. The average process length showed a significant inverse relation to annual seawater density: σ_{t annual} = ?0.8674 × average process length + 1029.3 (R² = 0.84), with a standard error of 0.78 kg m^?3. A sediment trap study from Effingham Inlet in British Columbia revealed the same relationship between average process length and local seawater density variations. In the Baltic–Skagerrak region, the average process length variation was related significantly to annual seawater density: σ_{t annual} = 3.5457 × average process length ? 993.28 (R² = 0.86), with a standard error of 3.09 kg m^?3. These calibrations cannot be reconciled, which accentuates the regional character of the calibrations. This can be related to variations in molecular data (small subunit, long subunit and internal transcribed spacer sequences), which show the presence of several genotypes and the occurrence of pseudo‐cryptic speciation within this species. Copyright © 2012 John Wiley & Sons, Ltd.     

Evaluation of the removal of heavy metals in a natural wetland impacted by mining activities in Mexico

This research is focused on evaluating heavy metals (Cd, Cu, Fe, Mn, Pb, and Zn) uptake and removal by Eleocharis ovata, Cyperus manimae, Typha dominguensis, and Pteridium aquilinum in a natural wetland impacted by mining activities. We analyzed heavy metals content and distribution in native plants, soils, and water of a semipermanent natural wetland in Taxco de Alarcón, Guerrero, and we also determined the physicochemical characteristics of the water. Translocation factor (TF) and bioconcentration factor (BCF) were evaluated. Results showed that physical and chemical conditions are favorable for plants development. Correlation analysis showed a good and positive relation (0.95) between Cu and Pb in soils and plants. In the analyzed matrices: Zn (0.62–2.20 mg/L) exceeded the permissible limits in water, high concentrations of Pb and Zn (26.57–525.67 and 266.67–983.33 mg/kg, respectively) were detected in the studied soils, and Pb exceeded the normal range for E. ovata and P. aquilinum in the analyzed plants. Uptake of heavy metals in the tissues of different species was found in the following order: root > leaf. Data of TF and BCF showed that E. ovata is a tolerant plant with respect to heavy metals exposure since TF value was greater than 1. This study showed that E. ovata could be considered as a bioaccumulator of heavy metals in contaminated soils.