Severe soil erosion during a 3‐day exceptional rainfall event: combining modelling and field data for a fallow cereal field

Exceptional rainfall events cause significant losses of soil, although few studies have addressed the validation of model predictions at field scale during severe erosive episodes. In this study, we evaluate the predictive ability of the enhanced Soil Erosion and Redistribution Tool (SERT‐2014) model for mapping and quantifying soil erosion during the exceptional rainfall event (~235 mm) that affected the Central Spanish Pyrenees in October 2012. The capacity of the simulation model is evaluated in a fallow cereal field (1.9 ha) at a high spatial scale (1 × 1 m). Validation was performed with field‐quantified rates of soil loss in the rills and ephemeral gullies and also with a detailed map of soil redistribution. The SERT‐2014 model was run for the six rainfall sub‐events that made up the exceptional event, simulating the different hydrological responses of soils with maximum runoff depths ranging between 40 and 1017 mm. Predicted average and maximum soil erosion was 11 and 117 Mg ha^?1 event^?1, respectively. Total soil loss and sediment yield to the La Reina gully amounted to 16.3 and 9.0 Mg event^?1. These rates are in agreement with field estimations of soil loss of 20.0 Mg event^?1. Most soil loss (86%) occurred during the first sub‐event. Although soil accumulation was overestimated in the first sub‐event because of the large amount of detached soil, the enhanced SERT‐2014 model successfully predicted the different spatial patterns and values of soil redistribution for each sub‐event. Further research should focus on stream transport capacity. Copyright © 2014 John Wiley & Sons, Ltd.     

The shape of the seismic response interaction diagram: The effect of combination rules in response spectrum analysis

This paper deals with the construction of seismic response interaction diagrams that show the correlation of multiple responses and are important to determine the critical combination of modal responses. Many design problems, such as column design under combined axial force and bending moments, fall into this category. We address general modal and multicomponent combination rules and study their effect on the shape of the response interaction diagrams, thus extending previous work done for quadratic combination rules. Special attention is given to multilinear combination rules which lead to polyhedral shapes. Having developed efficient methods to deal with polyhedral shapes, we explore the idea of adopting a multilinear modal combination rule to compose with a multicomponent percentage rule.     

Changes in phytoplankton production and upwelling intensity off A Coruña (NW Spain) for the last 28 years

Ocean Dynamics - The analysis of a 28-year-long (1989–2016) series of monthly measurements of chlorophyll concentrations and primary production rates at a shelf station off A Coruña (NW...     

The lyman alpha line in solar prominences

Solar Physics - We present simplified models for the region where Lα is formed, in the boundary between prominences and corona. The models were calculated by solving the radiation transfer in...     

ACE‐2 multiple angle micro‐pulse lidar observations from Las Galletas, Tenerife, Canary Islands

Multiple‐angle micro‐pulse lidar (MPL) observations were made at Las Galletas on Tenerife, Canary Islands during the Aerosol Characterization Experiment‐2 (ACE‐2) conducted June–July, 1997. A principal objective of the MPL observations was to characterize the temporal/spatial distributions of aerosols in the region, particularly to identify and profile elevated Saharan dust layers which occur intermittently during the June–July time period. Vertical and slant angle measurements taken 16 and 17 July characterize such an occurrence, providing aerosol backscatter, extinction, and optical depth profiles of the dust layer between 1 and 5 km above mean sea level (MSL). Additionally, horizontal measurements taken in Las Galletas throughout the 6‐week period provide a time profile of the varying aerosol extinction at the surface. This profile exhibits the alternating periods of clean maritime air and pollution outbreaks that typified the region. Horizontal measurements also provide some evidence suggesting the possible influx of Saharan dust from the free troposphere to the surface. This paper presents estimates of aerosol optical properties retrieved from the multi‐angle MPL measurements in addition to an outline of the methodologies employed to obtain these results.     

Mathematical model for one-dimensional desiccation and consolidation of sedimented soils

A mathematical model has been developed to represent the physical phenomena that occur during the desiccation and one-dimensional consolidation of successive layers of hydraulically transported sediments as they are periodically deposited in a containment area. The governing boundary value problem, defined in terms of pore water pressures, consists of two field equations (one for the saturated domain and one for the unsaturated domain), a drainage boundary condition, an evapotranspiration boundary condition and a series of continuity conditions at the interfaces between different layers. A number of simplifying assumptions were made to render the field equations tractable, and a step-by-step numerical procedure was used to solve the linearized boundary value problem; at the end of each step, the errors introduced by the simplifying assumptions were corrected. Based on a thorough study of the convergence and stability conditions associated with the numerical approximation employed, a system of automatic corrections was incorporated into the computer program to reduce the time increment if stability problems originate during the solution. Based on the results of a parameter study, it was found that, although drainage conditions at the bottom of the, layer do exert some influence on the consolidation rate during deposition of the dredgings, the evapotranspiration potential renders this effect almost negligible when desiccation takes place at the surface. In contrast, transpiration plays an important, role on the consolidation rate during the early stages of desiccation, but its effect is reduced considerably as the water table approaches an equilibrium position.     

Runoff generation and routing on artificial slopes in a Mediterranean–continental environment: the Teruel coalfield,Spain

The aim of this study was to identify the mechanisms of runoff generation and routing and their controlling factors at the hillslope scale, on artificial slopes derived from surface coal mining reclamation in a Mediterranean–continental area. Rainfall and runoff at interrill and microcatchment scales were recorded for a year on two slopes with different substrata: topsoil cover and overburden cover. Runoff coefficient and runoff routing from interrill areas to microcatchment outlets were higher in the overburden substratum than in topsoil, and greater in the most developed rill network. Rainfall volume is the major parameter responsible for runoff response on overburden, suggesting that this substratum is very impermeable—at least during the main rainfall periods of the year (late spring and autumn) when the soil surface is sealed. In such conditions, most rainfall input is converted into runoff, regardless of its intensity. Results from artificial rainfall experiments, conducted 3 and 7 years after seeding, confirm the low infiltration capacity of overburden when sealed. The hydrological response shows great seasonal variability on the overburden slope in accordance with soil surface changes over the year. Rainfall volume and intensities (I₃₀, I₆₀) explain runoff at the interrill scale on the topsoil slope, where rainfall experiments demonstrated a typical Hortonian infiltration curve. However, no correlation was found at the microcatchment level, probably because of the loss of functionality of the only rill as ecological succession proceeded. The runoff generation mechanism on the topsoil slope is more homogeneous throughout the year. Runoff connectivity, defined as the ratio between runoff rates recorded at the rill network scale and those recorded at the interrill area scale in every rainfall event, was also greater on the rilled overburden slope, and in the most developed rill network. The dense rill networks of the overburden slope guarantee very effective runoff drainage, regardless of rainfall magnitude. Rills drain overland flow from interrill‐sealed areas, reducing the opportunity of reinfiltration in areas not affected by siltation. Runoff generation and routing on topsoil slopes are controlled by grass cover and soil moisture content, whereas on overburden slopes rill network density and soil moisture content are the main controlling factors. Copyright © 2002 John Wiley & Sons, Ltd.     

Aquifer development planning to supply a seaside resort: a case study in Goa,India

Using the hydrogeological and socio-economic data derived from a European Commission research project on the measurement, monitoring and sustainability of the coastal environment, two optimization models have been applied to satisfy the future water resources needs of the coastal zone of Bardez in Goa, India. The number of tourists visiting Goa since the 1970s has risen considerably, and roughly a third of them go to Bardez taluka, prompting growth in the tourist-related infrastructure in the region. The optimization models are non-linear mixed integer models that have been solved using GAMS/DICOPT++ commercial software. Optimization models were used, firstly, to indicate the most suitable zones for building seaside resorts and wells to supply the tourist industry with an adequate amount of water, and secondly, to indicate the best location for wells to adequately supply pre-existing hotels. The models presented will help to define the optimal locations for the wells and the hydraulic infrastructures needed to satisfy demand at minimum cost, taking into account environmental constraints such as the risk of saline intrusion.

---

Résumé A l’aide de données hydrogéologiques et socio-économiques, dérivées d’un projet de recherche de la Commission Européenne sur l’étude, la surveillance et la durabilité de l’environnement c?tier, deux modèles d’optimisation ont été appliqués en vue de satisfaire les besoins futurs en ressources en eau de la zone c?tière de Bardez au Goa en Inde. Le nombre de touristes qui visitent le Goa depuis les années 70 a considérablement augmenté et environ un tiers d’entre eux se rend à Bardez taluka, ce qui encourage la croissance des infrastructures liées au tourisme dans la région. Les modèles d’optimisation sont des modèles non linéaires mixtes en nombres entiers qui ont été résolus en utilisant le logiciel commercial GAMS/DICOPT++. Les modèles d’optimisation ont été utilisés pour indiquer premièrement les zones les plus appropriées pour construire des stations balnéaires et des puits pour approvisionner en quantité d’eau suffisante l’industrie touristique, et deuxièmement pour indiquer la meilleure localisation de puits pour l’alimentation des h?tels préexistants. Les modèles présentés aideront à définir les localisations optimales des puits et des infrastructures hydrauliques nécessaires à la satisfaction de la demande à un co?t minimum, tout en prenant en compte les contraintes environnementales, tel que le risque d’intrusion saline.

---

Resumen Se han aplicado dos modelos de optimización en base a datos socio-económicos e hidrogeológicos derivados de un proyecto de investigación de la Comisión Europea sobre medición, monitoreo y sostenibilidad del ambiente costero para satisfacer las necesidades futuras de recursos hídricos de la zona costera de Bardez en Goa, India. El número de turistas que visita Goa desde la década de 1970′s ha subido considerablemente y cerca de un tercio de ellos van a Bardez taluka impulsando el crecimiento en la infraestructura turística de la región. Los modelos de optimización son modelos de números enteros mixtos no-lineales que se han resuelto usando el programa comercial GAMS/DICOPT++. Los modelos de optimización se usaron, primero para indicar las zonas más adecuadas para la construcción de centros de diversión en las márgenes del océano y pozos para abastecer la industria turística con una adecuada cantidad de agua, y segundo, para indicar la mejor localización de pozos para el abastecimiento de hoteles pre-existentes. Los modelos que se presentan ayudarán a definir las localizaciones óptimas para los pozos y las infraestructuras hidráulicas necesarias para satisfacer la demanda al mínimo costo, tomando en consideración restricciones ambientales tal como el riesgo de intrusión salina.

     

Multivariate discriminant analysis distinguishes metal- from non metal-related biomarker responses in the clam Chamaelea gallina

Molecular biomarkers are among the most sensitive and earliest responses to pollutants. However, lack of detailed knowledge on variability of responses and their possible seasonal variation limit their use. In addition, the seasonality of biological processes modulates the response of organisms to pollutant stressors. Using multivariate statistics, we have studied the influence of environmental and biological factors on the response of a battery of molecular biomarkers in the clam Chamaelea gallina collected along the South-Spanish littoral. Multivariate discriminant analysis clearly distinguished biomarker response between clean and polluted areas, using heavy metals as indicator of pollution. Such differences disappeared when the dataset was normalised for metal content, thus indicating that pollution was the main significant cause of the changes observed between clean and polluted sites. In conclusion, this work shows that, when applying a complete biomarker panel, multivariate statistical tools can be used to discern pollutant- from non pollutant-related responses.     

In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).