Alpine tectonics in the Calabrian–Peloritan belt (southern Italy): New 40Ar/39Ar data in the Aspromonte Massif area

This study provides new ⁴⁰Ar/³⁹Ar geochronological constraints on the age of the Alpine tectonics in the Aspromonte Massif (southern part of the Calabrian–Peloritan belt). This massif exposes the upper units of the Calabride Complex which originated from the European continental margin. The Calabride Complex was incorporated in the Alpine orogenic wedge and then integrated into the Apennines and Maghrebides fold-and-thrust belts. Throughout the Calabride Complex there is evidence for a two stage tectonic history, which remains however rather poorly dated: Alpine nappe stacking is followed by extensional reworking along the former thrust contacts or along new detachment surfaces. Our new ages suggest that exhumation of the uppermost units, which accompanied nappe stacking, probably started at 45 Ma and that the deepest units were almost completely exhumed at 33 Ma. This kinematics probably corresponds to syn-orogenic extension while the end of exhumation is clearly related to the extensional tectonics dated at 28.6 Ma along detachment structures.Our geochronological data reveal a very short lag time between accretional and extensional processes in this part of the Mediterranean Alpine orogenic belt. The direction of extension, when the units are restored to their initial position (i.e. before the opening of the Western Mediterranean basins and the bending of the arc) is NNE–SSW. Such a direction does not fit with the eastward slab-retreat model generally put forward to explain extension in the Western Mediterranean. In contrast, we provide evidence for roughly N–S middle Oligocene extension in the accretionary prism, not previously described in this part of the Mediterranean domain.     

Phytoliths infer locally dense and heterogeneous paleovegetation at FLK North and surrounding localities during upper Bed I time, Olduvai Gorge, Tanzania

The phytolith content of 10 samples collected immediately under Tuff IF (~ 1.785 Ma) at FLK N and other surrounding localities (~ 2 km²) provides a direct botanical evidence for woody vegetation in the eastern margin of Olduvai Gorge during uppermost Bed I time. Observation and counting of 143 phytolith types (5 to >150 μ) reveal dense but heterogeneous woody cover (~ 40–90%) of unidentified trees and/or shrubs and palms associated to the freshwater springs surrounding FLK N, and more open formation (presumably ~ 25–70% woody cover) in the southeast at localities VEK, HWK W and HWK E. The paleovegetation is best described as groundwater palm forest/woodland or bushland, which current analogue may be found near Lake Manyara in similar hydrogeological context (freshwater springs near saline/alkaline lake). Re-evaluating the published pollen data based on this analogy shows that 70% of the pollen signal at FLK N may be attributed to thicket-woodland, Acacia groundwater woodland, gallery and groundwater forests; while < 30% is attributed to swamp herbage and grasslands. Micro-botanical, isotopic, and taphonomical studies of faunal remains converge on the same conclusion that the area surrounding FLK N, which attracted both carnivores and hominins in the early Pleistocene, was densely wooded during uppermost Bed I time.     

Deciphering the depositional environment of the laminated Crato fossil beds (Early Cretaceous,Araripe Basin,North‐eastern Brazil)

The laminated limestones of the Early Cretaceous Crato Formation of the Araripe Basin (North‐eastern Brazil) are world‐famous for their exceptionally well‐preserved and taxonomically diverse fossil fauna and flora. Whereas the fossil biota has received considerable attention, only a few studies have focused on the sedimentary characteristics and palaeoenvironmental conditions which prevailed during formation of the Crato Fossil Lagerstätte. The Nova Olinda Member represents the lowermost and thickest unit (up to 10 m) of the Crato Formation and is characterized by a pronounced rhythmically bedded, pale to dark lamination. To obtain information on palaeoenvironmental conditions, sample slabs derived from three local stratigraphic sections within the Araripe Basin were studied using high‐resolution multiproxy techniques including detailed logging, petrography, μ‐XRF scanning and stable isotope geochemistry. Integration of lithological and petrographic evidence indicates that the bulk of the Nova Olinda limestone formed via authigenic precipitation of calcite from within the upper water column, most probably induced and/or mediated by phytoplankton and picoplankton activity. A significant contribution from a benthonic, carbonate‐secreting microbial mat community is not supported by these results. Deposition took place under anoxic and, at least during certain episodes, hypersaline bottom water conditions, as evidenced by the virtually undisturbed lamination pattern, the absence of a benthonic fauna and by the occurrence of halite pseudomorphs. Input of allochthonous, catchment‐derived siliciclastics to the basin during times of laminite formation was strongly reduced. The δ¹⁸O values of authigenic carbonate precipitates (between ?7·1 and ?5·1‰) point to a ¹⁸O‐poor meteoric water source and support a continental freshwater setting for the Nova Olinda Member. The δ¹³C values, which are comparatively rich in ¹³C (between ?0·1 and +1·9‰), are interpreted to reflect reduced throughflow of water in a restricted basin, promoting equilibration with atmospheric CO₂, probably in concert with stagnant conditions and low input of soil‐derived carbon. Integration of lithological and isotopic evidence indicates a shift from closed to semi‐closed conditions towards a more open lake system during the onset of laminite deposition in the Crato Formation.     

Late Ordovician climbing‐dune cross‐stratification: a signature of outburst floods in proglacial outwash environments?

Climbing dune‐scale cross‐statification is described from Late Ordovician paraglacial successions of the Murzuq Basin (SW Libya). This depositional facies is comprised of medium‐grained to coarse‐grained sandstones that typically involve 0·3 to 1 m high, 3 to 5 m in wavelength, asymmetrical laminations. Most often stoss‐depositional structures have been generated, with preservation of the topographies of formative bedforms. Climbing‐dune cross‐stratification related to the migration of lower‐flow regime dune trains is thus identified. Related architecture and facies sequences are described from two case studies: (i) erosion‐based sandstone sheets; and (ii) a deeply incised channel. The former characterized the distal outwash plain and the fluvial/subaqueous transition of related deltaic wedges, while the latter formed in an ice‐proximal segment of the outwash plain. In erosion‐based sand sheets, climbing‐dune cross‐stratification results from unconfined mouth‐bar deposition related to expanding, sediment‐laden flows entering a water body. Within incised channels, climbing‐dune cross‐stratification formed over eddy‐related side bars reflecting deposition under recirculating flow conditions generated at channel bends. Associated facies sequences record glacier outburst floods that occurred during early stages of deglaciation and were temporally and spatially linked with subglacial drainage events involving tunnel valleys. The primary control on the formation of climbing‐dune cross‐stratification is a combination between high‐magnitude flows and sediment supply limitations, which lead to the generation of sediment‐charged stream flows characterized by a significant, relatively coarse‐grained, sand‐sized suspension‐load concentration, with a virtual absence of very coarse to gravelly bedload. The high rate of coarse‐grained sand fallout in sediment‐laden flows following flow expansion throughout mouth bars or in eddy‐related side bars resulted in high rates of transfer of sands from suspension to the bed, net deposition on bedform stoss‐sides and generation of widespread climbing‐dune cross‐stratification. The later structure has no equivalent in the glacial record, either in the ancient or in the Quaternary literature, but analogues are recognized in some flood‐dominated depositional systems of foreland basins.     

The Scandinavian Ice Sheet: from MIS 4 to the end of the Last Glacial Maximum

Lambeck, K., Purcell, A., Zhao, J. & Svensson, N‐O. 2010 (April): The Scandinavian Ice Sheet: from MIS 4 to the end of the Last Glacial Maximum. Boreas, Vol. 39, pp. 410–435. 10.1111/j.1502‐3885.2010.00140.x. ISSN 0300‐9483. Glacial rebound modelling, to establish constraints on past ice sheets from the observational evidence of palaeo‐shoreline elevations, is well established for the post‐ Last Glacial Maximum (post‐LGM) period, for which the observational evidence is relatively abundant and well distributed spatially and in time. This is particularly the case for Scandinavia. For the earlier part of the glacial cycle this evidence becomes increasingly sparse and uncertain such that, with the exception of the Eemian period, there are very few, if any, direct sea‐level indicators that constrain any part of the Scandinavian Ice Sheet evolution before the LGM. Instead, we assume that ice‐sheet basal conditions during Marine Isotope Stage 3 (MIS 3) are the same as those for the LGM, focus on establishing these conditions from the rebound analysis for the LGM and Lateglacial period, and then extrapolate to the earlier period using observationally constrained locations of the ice margins. The glacial rebound modelling and inversion follow previously established formulations, with the exception that the effects of water loading from proglacial lakes that form within the Baltic Basin and elsewhere have been included. The data set for the inversion of the sea‐ and lake‐level data has been extended to include marine‐limit data in order to extend the observational record further back in time. The result is a sequence of time slices for the Scandinavian Ice Sheet from the time of MIS 4 to the Lateglacial that are characterized by frozen basal conditions until late in the LGM interval when rapid thinning occurred in the eastern and southern sectors of the ice sheet. The primary function of these models is as an interpolator between the fragmentary observational constraints and to produce quantitative models for the glaciation history with predictive capabilities, for example regarding the evolution of the Baltic Basin.     

Volume diffusion of Ytterbium in YAG: thin-film experiments and combined TEM–RBS analysis

In this study, we address volume diffusion of ytterbium in yttrium aluminum garnet (YAG) using thin-film single crystal diffusion couples. We employ analytical transmission electron microscopy (ATEM) as a tool for combined microstructural and microchemical analysis and compare the results to Rutherford backscattering (RBS) analysis. Given the high spatial resolution of the method, we focus on microstructural changes of the thin-film diffusant source during the diffusion anneal. We evaluate the potential influence of the associated changes in its transport properties on the evolution of concentration profiles in the single crystal substrate. This approach allows us to test the reliability of determination of volume diffusion coefficients from thin-film diffusion experiments. We found that for the chosen experimental setting, the influence of thin-film re-crystallization is small when compared with the experimental uncertainty and good estimates for the volume diffusion coefficients of Yb in YAG can be obtained using standard assumptions. Both Yb-concentration profiles analyzed with ATEM and with RBS give similar results. At 1,450°C and 1 bar, we infer log D _Yb (m²/s) values of −19.37 ± 0.07 (TEM) and −19.84 ± 0.02 (RBS). Although the change in thin-film transport properties associated with successive crystallization during the diffusion anneal does not play a major role for our experimental setup, this effect cannot generally be ignored.     

Petrographical,structural, and mechanical analysis of armorican phtanites: A key raw material for the Mesolithic in Western France

Over the last ninety years or so, archaeological field work on outcrops of raw materials in western France has allowed researchers to identify the use of a large number of deformed rock types in lithic industries. These materials include Armorican phtanites, which are cherts that were widely exploited during the Mesolithic, principally during its final phase (5500–5000 yrs cal. B.C.). Because of variations in the mineralogical composition and physical properties of phtanites, different mechanical properties are exhibited by samples from the four main geological formations containing this rock type in the Armorican Massif of western France. These geological and mechanical parameters influenced the quantity of rock used and the knapping methods employed. They also influenced the tool types produced and their transfer, as recorded in archaeological sequences. The types of raw materials used are also controlled by the distance to sources of coastal flint pebbles or other autochthonous siliceous rocks. Therefore, the role of raw material properties in the creation and persistence of techno‐cultural or economic characteristics is different for each type of phtanite and yields fundamental information on the interaction of society with the geological environment. © 2010 Wiley Periodicals, Inc.     

ESR dating of tooth enamel in Mousterian layer 20, El Castillo,Spain

Nine faunal teeth from layer 20 of El Castillo cave in Cantabrian Spain were dated using electron spin resonance (ESR). Two teeth were rejected due to inconsistent subsample ages, while the remaining teeth yielded a mean age that is consistent with the stratigraphic expectations: 42.7±3.5. Uncertainty in the external γ dose rate results in a potential systematic uncertainty of±6.4ka that should affect all samples equally. The results provide independent confirmation of previously reported ¹⁴C ages for layer 20. © 2010 Wiley Periodicals, Inc.     

Biogeochemical Modelling of a Seasonally Anoxic Lake: Calibration of Successive and Competitive Pathways and Processes in Lake Aydat,France

A reactive transport model was developed to describe seasonal variations of biogeochemical and physical processes in Lake Aydat. The model includes physical processes such as vertical mixing, sedimentation and advection related to inflows into the lake and biogeochemical conversion processes in the water column and in the sediment surface layer. The reactions described in the model include primary redox reactions such as primary production, aerobic and anaerobic respiration, methanogenesis and secondary reactions established between oxidants and reducers produced by the primary reactions. After adjusting various kinetic constants, the model reasonably reproduced the main features of seasonal variations of dissolved oxygen and nitrate depth profiles and pH. The reactive transport model was also used to quantify the relative importance of different biogeochemical pathways. For instance, ferrous denitrification seems to play an important role when stratification is increasing.     

Development of a Darcy-Brinkman model to simulate water flow and tracer transport in a heterogeneous karstic aquifer (Val d’Orléans, France)

Darcy’s law is the equation of reference widely used to model aquifer flows. However, its use to model karstic aquifers functioning with large pores is problematic. The physics occurring within the karstic conduits requires the use of a more representative macroscopic equation. A hydrodynamic model is presented which is adapted to the karstic aquifer of the Val d’Orléans (France) using two flow equations: (1) Darcy’s law, used to describe water flow within the massive limestone, and (2) the Brinkman equation, used to model water flow within the conduits. The flow equations coupled with the transport equation allow the prediction of the karst transfer properties. The model was tested by using six dye tracer tests and compared to a model that uses Darcy’s law to describe the flow in karstic conduits. The simulations show that the conduit permeability ranges from 5?×?10^?6 to 5.5?×?10^?5?m² and the limestone permeability ranges from 8?×?10^?11 to 6?×?10^?10?m². The dispersivity coefficient ranges from 23 to 53 m in the conduits and from 1 to 5 m in the limestone. The results of the simulations carried out using Darcy’s law in the conduits show that the dispersion towards the fractures is underestimated.