Evaluation of the Iranian guideline for deismic rehabilitation of existing buildings

The Iranian Guideline for Seismic Rehabilitation of Existing Buildings （GSREB）, which is currently used for vulnerability assessment of existing buildings in Iran, is evaluated in this paper. The vulnerability of sample buildings of a variety stories with special steel moment resisting frames, designed according to the Standard No.2800 requirements, is assessed by GSREB. In the vulnerability assessment, different analysis methods were used and the results, in terms of usage ratio, defined as the ratio of the strength/deformation demand to the corresponding capacity, are compared. Numerical results show that some columns of these buildings do not satisfy the life safety performance criteria in the design hazard level. Moreover, the target displacement estimated by the Displacement Coefficient Method （DCM） is larger than the maximum displacement calculated by nonlinear dynamic analysis.     

Experimental and Numerical Investigation of the Flow Hydraulic in Gradual Transition Open Channels

Channel expansions are common in both natural and artificial open channels. With increasing cross-sectional dimensions in an expansion, the flow decelerates. Due to separation of flow and subsequent eddy formation, a significant head loss is occurred along the transition. This study presents the results of experimental investigations on subcritical flow along the expansive transition of rectangular to trapezoidal channels. Also, a numerical simulation was developed using the finite volume method with Reynolds Stress turbulent model. Water surface profiles and velocity distributions of flow through the transition were measured experimentally and compared with the numerical results. Also, hydraulic efficiency of the transition and coefficient of energy head loss were calculated. The results show that with increasing the upstream Froude number, hydraulic efficiency of the transition and coefficient of energy head loss are decreased and increased, respectively. The results also showed the ability of numerical simulation for simulating the flow separation zones and bed shear stress along the transition for different inlet discharges and inflow Froude numbers.     

A fast joint seismic data reconstruction by sparsity‐promoting inversion

Seismic field data are often irregularly or coarsely sampled in space due to acquisition limits. However, complete and regular data need to be acquired in most conventional seismic processing and imaging algorithms. We have developed a fast joint curvelet‐domain seismic data reconstruction method by sparsity‐promoting inversion based on compressive sensing. We have made an attempt to seek a sparse representation of incomplete seismic data by curvelet coefficients and solve sparsity‐promoting problems through an iterative thresholding process to reconstruct the missing data. In conventional iterative thresholding algorithms, the updated reconstruction result of each iteration is obtained by adding the gradient to the previous result and thresholding it. The algorithm is stable and accurate but always requires sufficient iterations. The linearised Bregman method can accelerate the convergence by replacing the previous result with that before thresholding, thus promoting the effective coefficients added to the result. The method is faster than conventional one, but it can cause artefacts near the missing traces while reconstructing small‐amplitude coefficients because some coefficients in the unthresholded results wrongly represent the residual of the data. The key process in the joint curvelet‐domain reconstruction method is that we use both the previous results of the conventional method and the linearised Bregman method to stabilise the reconstruction quality and accelerate the recovery for a while. The acceleration rate is controlled through weighting to adjust the contribution of the acceleration term and the stable term. A fierce acceleration could be performed for the recovery of comparatively small gaps, whereas a mild acceleration is more appropriate when the incomplete data has a large gap of high‐amplitude events. Finally, we carry out a fast and stable recovery using the trade‐off algorithm. Synthetic and field data tests verified that the joint curvelet‐domain reconstruction method can effectively and quickly reconstruct seismic data with missing traces.     

The effect of the Zagros Mountains on the formation and maintenance of the Iran Anticyclone using RegCM4

Iran anticyclone is one of the main features of the summer circulation over the Middle East in the middle and upper troposphere. To examine the effect of the Zagros Mountains on the formation and maintenance of the Iran anticyclone, an experiment was conducted by Regional Climate Model (RegCM4) in an area between 22°?C44°N and 35°?C70°E with a 40?km horizontal grid spacing. The NCEP/NCAR re-analysis data set were used to provide the initial and lateral boundary conditions in a control run and in a simulation run by removing the Zagros Mountains. The result reveals that the Zagros Mountains have an important effect on the formation and maintenance of the low-level cyclonic circulation and mid-level anticyclonic circulation in summer. Examining the diabatic heating shows that the elimination of the Zagros Mountains causes a significant change in the heating values and its spatial distributions over the study area. Comparing the diabatic heating terms, the vertical advection term has the main contribution to the total heating. In the absence of the Zagros Mountains, the vertical advection and the mid-troposphere anticyclonic circulation are apparently weak and, therefore, the Iran subtropical anticyclone vanishes over the west of Iran. The study indicates that the Zagros Mountains as an elevated heat source have the main impact in the formation of a thermally driven circulation over the Middle East.     

Innovative mitigation method for buried pipelines crossing faults

A new remediation technique is proposed to mitigate large deformations imposed on buried pipeline systems subject to permanent ground deformation. With this technique, low-density gravel(LDG) with high porosity, such as pumice,is used as backfill in the trench containing the pipe near an area susceptible to PGD. This countermeasure decreases soil resistance, soil-pipe interaction forces and strain on the pipe as the pipeline deformation mechanism changes to a more desirable shape. Expanded polys...     

Soil loss and displacement by heavy equipment in forest road subgrading projects

Forest soil is an important component of the natural environment, and is a primary medium for many biological activities. In this study, soil loss and displacement by excavator and bulldozer （heavy equipments） were measured on cut and fills slopes of forest roads located in Mazandaran province, lran. The volumes of soil losses were estimated by prismoidal analyses of cut and fill slopes deformation between two time treatments （under subgrading and two years later） in slope classes of 30-50% and 50-70%. Weights of soil losses were calculated by multiplying the volumes of soil losses （cm^3） to the general bulk density （1.3g/cm^3）. Soil displaced area by heavy equipment was evaluated according to earth working width. Results indicated that heavy equipment has significant effect on deformation of cut slope gradient and fill slope length （p〈0.0001）. During the two-year period, the cut （p〈0.0002） and fill （p〈0.0001） slope gradients were significantly deformed in different slope classes. The average soil loss by excavator and bulldozer were 160.35 t/ha·yr and 429.09 t/ha·yr, respectively. Moreover, the soil displaced area during the subgrading process by bulldozer was greater than excavator in both two slope classes （p〈0.05）. Soil loss and displacement in forest roads can be rednced by applying powerful excavators in subgrading project, especially in steep terrains.