An excursion to the Bayuda volcanic field of Northern Sudan

A cluster of well-preserved recent volcanoes in the northern Bayuda Desert make up a more or less continuous field some 520 km² in area surrounded by a number of isolated centres of eruption. The volcanoes are numerous but small; up to 400 m in height and 0.35 km² in volume. Most of them are simple composite volcanoes with a pyroclastic cone skirted by a small lava field erupted from the same vent after explosive eruptions had ceased. In a few instances, however, the cone was eviscerated by more violent eruptions, leaving a deep explosion crater. The lavas are all nepheline-normative alkali basalts and contain a variety of xenocrysts and xenoliths from at least three different sources. The distribution of the recent volcanoes was partly controlled by large granitic ring-intrusions of the Basement Complex country rocks. These intrusions belong to the Younger Granite association of late Precambrian or Lower Palaeozoic age and represent a volcanic-intrusive episode widespread in northern Africa. The complexes are composed of cale-alkaline and peralkaline granites and syenites and a related plexus of dyke swarms.     

On the performance of the flat plate solar heat collector

Summary A flat plate heat collector was constructed for the purpose of heating water by solar energy. It was erected facing south, tilted to the horizontal at the optimum tilt angle, and tested under the weather conditions typical to the U.A.R., for the different rates of flow. It was found, for the dimensions of the collector (0.8 m²) that the best rate of flow is about 12 l/h and that the corresponding rise in the temperature of the flowing water is about 40° C. The overall heat transfer coefficient and the efficiency of the collector were investigated. On the average, when the rate of flow ranges between 5 and 12 l/h, the efficiency was found to be about 45 percent.     

Total solar radiation on vertical and inclined surfaces during cloudless days in the U.A.R.

Summary Measurements of the total solar radiation at normal incidence, undertaken at Helwan Observatory, on every clear day and for a period of 10 years, have been studied in terms of the air mass and the sun's altitude. These measurements together with the data available in the literature on diffuse radiation, have led to the evaluation of the hourly rates of total solar radiation on vertical surfaces and south facing surfaces inclined to the horizontal at different tilt angles.     

Geochemical and petrographic studies of Ta mineralization in the Nuweibi albite granite complex, Eastern Desert, Egypt

The Nuweibi albite granite is one of 14 known Sn-Ta-Nb bearing granitoids in the Eastern Desert region of Egypt. The granite is a highly leucocratic, albite-rich rock with accessory columbite-tantalite, cassiterite, microlite and ixiolite as well as topaz, garnet and white mica. Ages of 450–600 Ma were obtained from zircons by the ²⁰⁷Pb/²⁰⁶Pb evaporation method. Great uncertainty is caused by the small size and poor quality of the grains, but the precision is sufficient to indicate that the granite is late- or postorogenic with respect to the Panafrican orogeny. The Nuweibi granite is divided into a western and an eastern part by a regional fault. Both parts of the granite are compositionally similar but there are important differences and a clear compositional gap between them, so they are considered separate facies of an intrusive complex. The eastern part of the granite is more highly mineralized, has higher modal albite contents and higher Ta/Nb ratios, both in the whole rock and in the ore minerals. It is suggested that the two parts of the granite evolved from a common source and were emplaced sequentially, the eastern part representing a later, more fractionated magma. Textural evidence strongly suggests that the granite has a magmatic origin overall, but disturbance of geochemical trends at the whole-rock scale and at the scale of zoning profiles in individual grains of columbite-tantalite indicate post-magmatic overprinting. By analogy with other Ta-bearing albite granites, the sodic bulk composition of the Nuweibi granite can be explained by fluorine enrichment in the magma. Fluorine contents in the magma were high enough to stabilize topaz, and muscovites contain 2–4 wt.%. F. However, whole-rock F contents are low. We speculate that the low Ca, Al and P contents of the magma prevented abundant F-bearing minerals to form and led to loss of fluorine to now-eroded roof rocks. Received: 8 November 1995 / Accepted: 10 June 1996     

Quantitative finite strain and kinematic flow analyses along the Zagros transpression zone, Iran

The Ghouri area in southwest Iran exposes a cross section through the Zagros orogenic belt. The area provides an opportunity to investigate quantitative finite strain (Rs), kinematic vorticity number (W_k), proportions of pure shear and simple shear components, sense of shear indicators, steeply plunging lineations, and other moderate to steeply plunging stretching lineations in a transpressional zone. Based on a classical strain analysis of deformed microfossils with oblate strain ellipsoid shape, the Zagros orogenic belt is classified as a pure-shear dominated zone of transpression, but asymmetry of shear-sense indicators suggests that a significant component of simple shear was involved along the deformation zone boundaries. The long axes of the microfossils and stretched pebbles of a deformed conglomerate were used to indicate the stretching direction in this zone. The stretching lineations have a steep to moderate plunge but a constant strain magnitude. Characteristics of dextral inclined transpressional kinematics in the Zagros continental collision zone were quantified and indicate an estimated k-value < 1, an angle between the maximum horizontal axis of the instantaneous strain ellipsoid and the zone boundary (θ = 32°), asymmetrical dextral shear-sense indicators, and an angle of relative plate motion (α = 25°).     

A review on mechanism and future perspectives of cadmium-resistant bacteria

Since the last few decades, cadmium anthropocentric sources have been increased drastically. Various chemical and physical approaches for cadmium remediation have been proposed, but these techniques are quite expensive, not healthy for the environment and not efficient at the low concentration of cadmium. Thus, in the last few years, the cadmium removal by biological approaches has received a great interest. Many bacteria can resist against high concentration of cadmium through different mechanisms. The cadmium-resistant bacteria can be grouped into three levels. The main group consists of bacteria which efflux the cadmium from the cells. The bacteria of the other two groups are capable of detoxifying or binding cadmium. The cadA and cadB gene systems are involved in efflux mechanism, and these encode different efflux pump proteins, while the functional groups such as amine, carboxyl, phosphate and hydroxyl facilitate cadmium binding to bacterial surface such as chemisorption. Many enzymes are involved in the detoxifying the cadmium and make the membrane impermeable against cadmium. This paper also reviews the industrial application of cadmium-resistant bacteria and the future perspectives of genetic engineering, bioelectrochemical system, microbial aggregates and biosorption of cadmium by algae.     

Integrated application of 2D resistivity and electromagnetic methods to investigate a metallic-sulfide deposit in Soap Gulch,Montana. A case study

Geoelectrical methods involving electrical resistivity tomography (ERT), self-potential (SP), frequency domain electromagnetic (FDEM), and very low frequency (VLF) methods have been used to provide valuable information in locating a known sulfide ore body in Soap Gulch, Montana. The study develops basis of comparison for the geophysical techniques employed. Ranges of resistivity along the area have been established using interpreted ERT which can help to understand the subsurface distribution of sulfides in the area. A sulfide body was delineated from the survey area corresponding to anomalously low resistivity values on the ERT section, negative SP, and high apparent current density zone in VLF. Depth to the localized ore zone ranges approximately from 10 to 20 m. FDEM data reflect the conductivity distribution of the shallow subsurface (less than 6 m deep); hence, the delineated sulfide zone had minimal contribution to FDEM measurements. The results of the study show that SP, VLF, and ERT methods provide significant information in localizing ore bodies. The survey revealed that the resistivity values obtained from ERT profile corroborate the FDEM, SP, and VLF from the area.     

Evaluation of the fast orthogonal search method for forecasting chloride levels in the Deltona groundwater supply (Florida,USA)

Despite the broad impact and importance of saltwater intrusion in coastal aquifers, little research has been directed towards forecasting saltwater intrusion in areas where the source of saltwater is uncertain. Saline contamination in inland groundwater supplies is a concern for numerous communities in the southern US including the city of Deltona, Florida. Furthermore, conventional numerical tools for forecasting saltwater contamination are heavily dependent on reliable characterization of the physical characteristics of underlying aquifers, information that is often absent or challenging to obtain. To overcome these limitations, a reliable alternative data-driven model for forecasting salinity in a groundwater supply was developed for Deltona using the fast orthogonal search (FOS) method. FOS was applied on monthly water-demand data and corresponding chloride concentrations at water supply wells. Groundwater salinity measurements from Deltona water supply wells were applied to evaluate the forecasting capability and accuracy of the FOS model. Accurate and reliable groundwater salinity forecasting is necessary to support effective and sustainable coastal-water resource planning and management. The available (27) water supply wells for Deltona were randomly split into three test groups for the purposes of FOS model development and performance assessment. Based on four performance indices (RMSE, RSR, NSEC, and R), the FOS model proved to be a reliable and robust forecaster of groundwater salinity. FOS is relatively inexpensive to apply, is not based on rigorous physical characterization of the water supply aquifer, and yields reliable estimates of groundwater salinity in active water supply wells.     

A comparison of ASCE and FAO-56 reference evapotranspiration for a 15-min time step in humid climate conditions

Many applications in diverse disciplines require estimates of evapotranspiration (ET) at hourly or smaller time steps. The primary objectives of this study were to compare the American Society of Civil Engineers (ASCE) and FAO-56 Penman–Monteith equations for 15-min ET₀ (ET_{0,15-min,ASCE} and ET_0,15-min,FAO) estimations for humid climate conditions and to compare the 24 h sum of ASCE (ET_0,24 h,ASCE) and FAO-56 15-min ET₀ (ET_0,24 h,FAO) with the daily ET₀ (ET_0,d,FAO) computed from the daily FAO-56 equation, which is identical to ASCE daily ET₀ equation. Ten-year, i.e., 1997–2006 continuous 15-min and daily weather data for 11 representative and well-distributed sites throughout Georgia, USA were used. It was evident that during the day, ET_{0,15-min,ASCE} was higher than ET_0,15-min,FAO due to a lower surface resistance parameter value, while at night ET_{0,15-min,ASCE} was lower than ET_0,15-min,FAO due to a higher surface resistance parameter value. The ET_0,15-min,FAO was about 5% less than ET_{0,15-min,ASCE} and ET_0,24 h,FAO was about 5% lower than ET_0,24 h,ASCE. The difference between ET_{0,15-min,ASCE} and ET_0,15-min,FAO during the day and night was highly dependent on wind speed. During the three summer months, i.e., June, July and August, on average, ET_0,24 h,FAO was only 1% higher than ET_0,d,FAO while ET_0,24 h,ASCE was 5% higher than ET_0,d,FAO. For the entire year, ET_0,24 h,FAO was 8% higher than ET_0,d,FAO while ET_0,24 h,ASCE was 13% higher than ET_0,d,FAO. The ET_0,24 h,FAO and ET_0,d,FAO had a better agreement than ET_0,24 h,ASCE and ET_0,d,FAO throughout the year and during the summer months. It is also worth noting that the daily calculations for FAO-56 and ASCE were identical. These results demonstrated that for applications that require 15-min time steps or daily ET₀ for the entire year, the use of ET_0,15-min,FAO and ET_0,24 h,FAO, respectively, will yield more consistent outcomes. The use of ET_0,d,FAO during the summer months can be as accurate as the use of ET_0,24 h,FAO for applications that require daily time steps, such as irrigation scheduling.