About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

OZONE VALLEY OVER TIBETAN PLATEAU*

We analysed the atmospheric total column ozone temporal and spatial distributions,by using the USA Nimbus Satellite TOMS data provided by the Goddard Space Flight Center of NASA,USA.We ploted the monthly mean total column ozone distributions over China by the averaged data from 1979 to 1991,and found that the atmospheric total column ozone contours were parallel to latitudes in winter and spring. However, from June, the lower center of atmospheric column ozone, called "ozone valley",was formed gradually over the Tibetan Plateau, as shown in Fig.     

A planetary boundary-layer numerical model containing third-order derivative terms

In this paper, the third-order derivative of velocity with respect to height is included in the traditional motion equations of the neutral PBL. The nonlinear equations are solved numerically to obtain the vertical distribution of wind in the PBL and some PBL characteristic parameters. Reasonable simulations of the Leipzig wind profile using these parameters show the success of this kind of nonlocal closure in a real PBL simulation.     

热液成矿作用的地质地球化学动力学——以胶东牟平-乳山金矿带为例

通过对胶东牟平—乳山热液脉状金,铅锌矿床成矿动力学控制规律的研究,说明了建立热液成矿反应体系的方法,并得出以下认识:（1）区域断裂构造活动,通过影响成矿反应体系的热力学性质和条件,控制元素的富集和分散。（2）热液成矿过程中容矿断裂活动可划分为两种作用方式:脆性破裂和韧—脆性张开,构成热液成矿的两种构造动力学环境。（3）热液成矿反应体系是一种开放的动态的热力学体系。断裂的脆性破裂阶段,使体系处于强烈的过饱和状态,矿质在远离平衡状态下快速结晶,加剧物质分异;在脆—韧性张开阶段,矿质在接近平衡态体系中缓慢晶出。（4）热液演化晚期,金在残余溶液中富集;当断裂再次发生构造脉动震颤时,早期形成的块状黄铁矿矿石碎裂,富金溶液充填其中,形成含裂隙金和晶隙金的富矿石。成矿体系热力学演化与构造动力学条件有利的匹配控制着富矿石的形成。     

ANALYSIS OF A CASE OF EAST ASIA COASTAL CYCLOGENESIS*

The evolution of an explosive cyclone off the East Asia coast in March 1979 is described.A shortwave trough in the southern branch of upper-level westerlies initiated the incipient cyclone.Later,a polar trough in the north amplified and became in phase with the southern shortwave to form a major trough.This major trough was responsible for the rapid intensification of the surface cyclone.In the early development stage,warm and moist air was transported northward to the developing area by a strong low-level jet.The ageostrophic wind associated with the low-level jet contributed to the frontogenesis,creating a favorable low-level environment for the rapid deepening.A low-level positive potential vorticity anomaly was created prior to the onset of rapid deepening.It was a result of frontal cloud condensation.The cyclone intensified rapidly when stratospheric air with high potential vorticity penetrated to the mid-troposphere.The rapid deepening took place at a location under the left-exit region of an amplifying jet streak behind the major trough and the right-entrance region of another anticyclonically-curved subtropical jet streak in a quasi-stationary ridge overJapan.Due to the blocking effect of the Tibetan Plateau,two shortwave disturbances were observed in the upper-level westerlies on the north and south sides of the Plateau.The southern disturbance initiated the incipient surface cyclone,while the amplifying northern disturbance was responsible for the rapid deepening.Thus,the evolution of the explosive cyclone in this case can be regarded as consecutive Petterssen's "type-B" cyclogenesis in two separate stages.     

Sediment budget-based estimates of trace metal inputs to a Chesapeake estuary

This article evaluates whether a sediment budget for the South River, Maryland, can be coupled with metals data from sediment cores to identify and quantify sources of historic metal inputs to marsh and subtidal sediments along the estuary. Metal inputs to estuarine marsh sediments come from fluvial runoff and atmospheric deposition. Metal inputs to subtidal sediments come from atmospheric deposition, fluvial runoff, coastal erosion, and estuarine waters. The metals budget for the estuary indicates that metal inputs from coastal erosion have remained relatively constant since 1840. Historical variations in metal contents of marsh sediments have probably resulted primarily from increasing atmospheric deposition in this century, but prior to 1900 may reflect changing fluvial sources, atmospheric inputs, or factors not quantified by the budget. Residual Pb, Cu, and Zn in the marsh sediments not accounted for by fluvial inputs was low to moderate in 1840, decreased to near zero circa 1910, and by 1987 had increased to levels that were one to ten times greater than those of 1840. Sources of variability in subtidal cores could not be clearly discerned because of geochemical fluxes, turbulent mixing, and bioturbation within the cores. The sediment-metal budgeting approach appears to be a viable method for delineating metal sources in small, relatively simple estuarine systems like the South River and in systems where recent deposition (for example, prograding marshes) prevents use of deep core analysis to identify background levels of metal. In larger systems or systems with more variable sources of sediment and metal input, however, assumptions and measurement errors in the metal budgeting approach suggest that deep core analysis and normalization techniques are probably preferable for identifying anthropogenic impacts.Field and laboratory research conducted at the Department of Geography, University of Maryland, College Park, Maryland, 20742, USAField and laboratory research conducted at the Marine and Estuarine Environmental Science Program, University of Maryland, College Park, Maryland, 20742, USA     

Adsorption of fluoride on goethite surfaces-implications on dental epidemiology

Fluoride ion interaction with synthetically prepared goethite has been investigated over a range of pH values (4–9) and F^– concentrations (10^–3–10^–5 M). The amount of F^– retained by goethite suspensions was found to be a function of pH, media ionic strength, F^– concentration, and goethite concentration. The lowest ionic strength (0.001 M KNO₃) gave the highest adsorption medium. Uptake was minimal at pH >7 and increased with decreasing pH. Thermodynamic properties for fluoride adsorption at 298 K and 323 K were investigated. The isosteric heat of adsorption (H _r) was calculated and the heterogeneity and homogeneity of the surface examined for goethite. In view of the importance of fluoride in dental health, the interaction of fluoride on goethite in the physical environment has important implications on dental epidemiology.     

Interpolation by regularized spline with tension: I. Theory and implementation

Bivariate and trivariate functions for interpolation from scattered data are derived. They are constructed by explicit minimization of a general smoothness functional, and they include a tension parameter that controls the character of the interpolation function (e.g., for bivariate case the surface can be tuned from a membrane to a thin steel plate), Tension can be applied also in a chosen direction, for modeling of phenomena with a simple type of anisotropy. The functions have regular derivatives of all orders everywhere. This makes them suitable for analysis of surface geometry and for direct application in models where derivatives are necessary. For processing of large datasets (thousands of data points), which are now common in geosciences, a segmentation algorithm with a flexible size of overlapping neighborhood is presented. Simple examples demonstrating flexibility and accuracy of the functions are presented.On leave from the Department of Physical Geography and Cartography, Comenius University, Mlynská dolina, Bratislava, Czechoslovakia.On leave from the Institute of Physics, Dúbravská cesta 9, Bratislava, Czechoslovakia.     

相律的应用:蒸发结晶过程自由度

在连续原理和浓度限制条件的基础上,分析了卤水蒸发过程的自由度,提出了“蒸发结晶过程自由度”这一概念。发现蒸发结晶过程自由度在整个过程中不是1便是0,在1和0之间交替变化,与选择的组分数和析出固相数目无关。蒸发结晶过程自由度为1,物理意义是在不引起新相产生旧相不消失的前提下过程连续地变化(水分的连续蒸失),几何意义是指在适当的坐标系中的一条线,一条直线或曲线;0的物理意义是指新相的产生和旧相的即将消失或者前一段的连续变化过渡到后一段的连续变化,几何意义是指一点,两蒸发阶段的交点或者过程的终点。简单地讨论了过程的单向性和连续件。     

论南岭成矿带大宝山斑岩型铜矿的特殊性及其勘查意义

广东省大宝山矿床是南岭成矿带唯一的大型铜多金属矿床，此次研究在矿区中南部发现了细脉浸染状铜矿的新类型。为确定其是否为斑岩型铜矿的成因类型，本文在梳理南岭成矿带铜成矿条件和成矿规律的基础上，查明了矿区中南部英安斑岩的蚀变和铜矿化特征。综合研究认为南岭成矿带早侏罗世中酸性斑岩的小岩体较多，叠加多期断裂构造和碳酸盐岩建造，非常有利于铜多金属成矿物质的运移、富集。大宝山英安斑岩发育黑云母化、钾长石化、青磐岩化、绢英岩化、泥化等蚀变类型，铜矿化与绢英岩化、绿泥石化关系密切。大宝山铜矿中的英安斑岩沿逆冲推覆构造侵位并呈岩墙状产出，冷却过程中受区域构造应力产生了一组平行裂隙，岩浆房去气作用排出的热液沿裂隙蚀变围岩并充填成矿。大宝山斑岩型铜矿取得的找矿勘查成果表明，“全位成矿，缺位找矿”理念可以有效指导靶区圈定和老矿山外围（深部）找矿勘查，早侏罗世的南岭具有形成较大规模斑岩型铜矿的条件。