福安—南靖断裂带特征及其地质意义讨论

通过对沉积建造、岩浆活动、构造变动以及地球物理和地球化学综合研究,在全国统一的一、二级构造单元划分框架下,以反映早古生代末构造格局为主,福建省大致以福安—南靖断裂构造带为省内一级构造单元为边界划分西部华夏地块、东部闽浙沿海火山侵入杂岩带2个三级构造单元,讨论了福安—南靖构造带特征及其地质意义。     

小秦岭地区金矿成矿机理分析

小秦岭成矿带是我国重要的贵金属成矿带之一,金矿受地层、构造和岩浆岩控制,具有＂三位一体＂的成矿模式。太古宙太华群地层为成矿提供了物质基础,区域变质作用使金发生初次富集;早期自北而南的挤压形成规模巨大的推覆构造为含金石英脉的生成提供了有利空间;燕山期构造—岩浆活动对金的活化、迁移、富集起主导作用     

硅藻提纯方法新进展:小个体硅藻纯化的实验技术

硅藻壳体氧同位素是近年来发展起来的一种重要的古气候研究手段[1～3],硅藻的分离提纯是开展此项研究的重要一环.矿物杂质由于与硅藻壳体的氧同位素差异很大[1,4,5],对目前常用的硅藻氧同位素实验方法[1,4]获得的结果有显著影响.     

悬链线法在水平定向钻轨迹设计中的应用探究

铝孔轨迹设计是非开挖水平定向钻施工中一项重要内容。其最优化设计在国内已较成熟,但多数优化设计未从力学方面进行优化设计。针对这一情况,引入悬链线法来优化水平定向钻轨迹设计。通过悬链线法的计算可知,优化后的轨迹不仅有利于降低钻杆回转阻力和扭矩消耗,提高机械钻速,增长管道使用年限,同时与传统设计方法相比较,其计算出的轨迹长度也比传统圆弧轨迹长度略短,表明了悬链线法在水平定向钻轨迹设计上具有一定的优势。     

北美非开挖技术发展近况-水平定向钻进应用方面

2010年5月北美非开挖技术协会（NASTT）在美国芝加哥举办了一年一度年会,同时庆祝协会成立20周年,来自美国和加拿大的几百位学者对非开挖技术的各个方面进行了为期一个星期的探讨。本文主要从136篇会议论文中遴选了有关水平定向钻进技术在北美地区的应用近况进行了描述,包括水平定向钻进中的窜浆问题、入海口的钻进技术、敷设管道的推进技术、钻杆失效的管理、地表变形检测等方面进行了阐述,笔者希望通过这些技术介绍,能够对国内广大非开挖业内人士的设计、施工、研究有所借鉴。     

Investigation of the sulfur speciation during chalcopyrite leaching by moderate thermophile Sulfobacillus thermosulfidooxidans

The surface sulfur speciation of chalcopyrite leached by moderately thermophilic Sulfobacillus thermosulfidooxidans was investigated by employing scanning electron microscopy (SEM), X-ray diffraction (XRD) and sulfur K-edge X-ray absorption near edge structure spectroscopy (XANES), accompanying with the leaching behavior elucidation. Leaching experiment showed that there was an optimum range of the redox potential for chalcopyrite dissolution. Leaching products were found accumulating during the leaching process, which might be jarosite according to the XRD analysis. The sulfur K-edge spectra indicated that chalcocite might be the intermediate sulfur compound under a critical redox potential, which might explain the existence of optimum range of the redox potential and provide an evidence for the two-step leaching model of chalcopyrite at low Eh. In addition, the results of sulfur K-edge spectra showed jarosite would accumulate on mineral surface, which might be the main component of the passivation layer.     

漓江水系汞的分布和污染研究

对漓江水系干流、支流、连体湖泊、较大的孤立湖塘和近岸水井设置40个采样点。水样采样周期为2个水文年,分枯水季和丰水季两次采样,现场测定水温、电导率、pH值等理化参数。系统采集水样112件、底泥样40件、水草样40件、近岸土壤样40件。底泥样用逐步浸提法进行不同形态汞分析。研究结果显示,干流河水、底泥和水草中汞的平均含量分别为0．12μg／L、0．20μg／g和0．032μg／g;主要支流河水、底泥和水草中汞的平均含量高于干流,分别为0．15—0．23μg／L、0．38～1．7μg／g和0．028—0．044μg／g。底泥中汞含量均高于近岸土壤汞含量。无论是干流还是支流,河水汞含量与底泥、水草汞含量有明显的相关关系。由上游至下游,漓江水系干流、主要支流河水样汞含量均不断增高,可高出源头河水汞含量的1．5—5倍。相应地指示重金属离子污染的参考指标——电导率值不断增高,河水的pH值亦逐渐增高。丰水期（5月至6月）河水中的汞含量（0．12—0．28μg／L）明显高于枯水期（9月至11月）河水中的汞含量（0．091—0．28μg／L）。不同断面河水汞含量均高于相应近岸井水汞含量。不同水体底泥中汞的形态分布一般顺序为：残渣态〉难氧化降解有机质结合态〉腐殖酸结合态〉碳酸盐和铁锰氧化物吸附态〉交换态〉易氧化降解有机质结合态〉水溶态。综合各项资料分析,认为漓江干流是桂林城市汞污染最大的汇。根据地表水环境质量标准（GB3838--2002）,仅汞而言,漓江水系均达到Ⅳ类水质标准（河水中汞含量≤1μg／L）。漓江支流汞污染高于干流,对干流存在较大的污染风险。     

鄂尔多斯盆地天环坳陷迁移演化与坳陷西翼油气成藏

鄂尔多斯盆地是我国陆上最重要的含油气盆地之一,本文以鄂尔多斯盆地西缘为研究对象,以地震反射资料为基础,主要采用地震剖面"层拉平"与"平衡剖面恢复"等技术手段,对天环坳陷形成与迁移演化历史进行了动态分析。研究结果表明:1)天环坳陷最早形成于晚侏罗世,后期由于受燕山晚期及喜马拉雅山期构造运动影响,坳陷核部逐渐向东迁移至现今位置,前后累计迁移距离约30 km;2)当坳陷核部向东迁移至有效烃源岩范围附近时,原先已形成的油气藏发生重新调整,油气向坳陷西翼高部位运移、聚集,从而形成了次生构造油气藏。     

Modeling Strain Rate Effect of Heterogeneous Materials Using SPH Method

The strain rate effect on the dynamic compressive failure of heterogeneous material based on the smoothed particle hydrodynamics (SPH) method is studied. The SPH method employs a rate-insensitive elasto-plastic damage model incorporated with a Weibull distribution law to reflect the mechanical behavior of heterogeneous rock-like materials. A series of simulations are performed for heterogeneous specimens by applying axial velocity conditions, which induce different strain-rate loadings to the specimen. A detailed failure process of the specimens in terms of microscopic crack-activities and the macro-mechanical response are discussed. Failure mechanisms between the low and high strain rate cases are compared. The result shows that the strain-rate effects on the rock strength are mainly caused by the changing internal pressure due to the inertial effects as well as the material heterogeneity. It also demonstrates that the inertial effect becomes significant only when the induced strain rate exceeds a threshold, below which, the dynamic strength enhancement can be explained due to the heterogeneities in the material. It also shows that the dynamic strength is affected more significantly for a relatively more heterogeneous specimen, which coincides with the experimental results showing that the poor quality specimen had a relatively larger increase in the dynamic strength.