An overview of SAX99: acoustic measurements

A high-frequency acoustic experiment was performed at a site 2 km from shore on the Florida Panhandle near Fort Walton Beach in water of 18-19 m depth. The goal of the experiment was, for high-frequency acoustic fields (mostly In the 10-300-kHz range), to quantify backscattering from the seafloor sediment, penetration into the sediment, and propagation within the sediment. In addition, spheres and other objects were used to gather data on acoustic detection of buried objects. The high-frequency acoustic interaction with the medium sand sediment was investigated at grazing angles both above and below the critical angle of about 30°. Detailed characterizations of the upper seafloor physical properties were made to aid in quantifying the acoustic interaction with the seafloor. Biological processes within the seabed and the water column were also investigated with the goal of understanding their impact on acoustic properties. This paper summarizes the topics that motivated the experiment, outlines the scope of the measurements done, and presents preliminary acoustics results     

Particle dynamics as controlled by the flow field of the eastern equatorial Pacific

Profiles made during the JGOFS EgPac October 1992 time series cruise to the equator with a Large Aggregate Profiling System (LAPS) recorded the concentration and size distribution of particles in the marine snow size range ( > 0.5 mm diameter). Profiles were made routinely at local midnight during the twenty day occupation of the time series station on the equator. The LAPS data set, when combined with the CTD/transmissometer data set from the EgPac program's intensive profiling operation, reveals a complex dynamic of particle production and aggregation driven by the equatorial flow field.During the cruise, the influence of the passage of a Tropical Instability Wave (TIW) was observed in the transmissometer/aggregate and temperature/salinity data sets. A peak in particle production rate occurred in conjunction with the maximum shoaling of the thermocline and a minimum in the aggregate volume concentration. Subsequently, the particle load in the surface water increased followed by an increase in the aggregate abundance. Quasi -oligotrophic conditions on the equator (subsurface particle and aggregate maxima and decreased particle production rates) toward the end of the time series corresponded to the appearance of stratified low salinity water characteristic of more northerly conditions.The variations in temperature and salinity fields are ascribed to the passage of a TIW; in sequence: the trailing edge, the northwestward-flowing cool cusp water and the convergent front. Current meters at the equator recorded a rotational flow at 80 m, with a shift from southeastward to northeastward flow during this sequence. A simple conceptual model of meridional flow field is presented in which poleward transport of the upwelled water from the equator returns at shallow depths to mix with the EUC. The signature of this return flow is reflected in the decrease in the vertical gradients of nutrients and oxygen at the equator with respect to the poleward gradients, and a subsurface particle maximum below the EUC. The flow field's effect on the distribution of particles is reflected in the meridional pattern of the sediment accumulation rate (Murray and Leinen, 1996). The return flow of particles to the equator is reflected in the maximum in accumulation rate near the equator. The longterm influence of TIW's is reflected in the asymmetry of the accumulation rates across the equator as described by Murray and Leinen (1996), with the maximum accumulation rate found south of the equator, a local minimum in accumulation rate at approximately 2°N, and a local maximum near 4°N.     

Analytic construction of periodic orbits about the collinear points

A third-order analytical solution for halo-type periodic motion about the collinear points of the circular-restricted problem is presented. The three-dimensional equations of motion are obtained by a Lagrangian formulation. The solution is constructed using the method of successive approximations in conjunction with a technique similar to the Lindstedt-Poincaré method. The theory is applied to the Sun-Earth system.     

Geological controls on the sulphur content of coal seams in the Northumberland Coalfield, Northeast England

The sulphur content of coal is an important consideration when developing reserves for exploitation, driven by emission limits from power stations becoming more stringent. Variations in the sulphur content of Westphalian A and B coals from the predominantly freshwater Northumberland Coalfield, Northeast England, were studied according to their regional, stratigraphic and in-seam location. The observed variation in sulphur content spatially increases towards the source area away from more marine influenced areas, with increased sulphur content through time linked to changes in the general depositional environment as conditions became more marine-influenced. A model of basinal surface water and groundwater flow driven by post-depositional source area tectonism is thought to have played only a minor role in contributing secondary sulphur to the coal. However, the isotopic composition of coal pyrite shows a similar range in composition to that of pyrite and other sulphides from the North Pennine Orefield along the southern margin of the coalfield, suggesting an additional potential source of secondary sulphur, as sulphur-rich fluids were expelled northwards through the coal measures during early Permian Variscan transpression from the south. The Westphalian A and B are interpreted as third-order depositional sequences, defined by third-order maximum flooding surfaces. Each sequence is made up of several coal-bearing fourth-order parasequences, which tend to be more brackish to marine in character, on either side of the third-order maximum flooding surfaces when base level was relatively high. The lowest sulphur coals are confined to the lower to middle, relative low stand part of the Westphalian A third-order base level curve and the lowest part of the Westphalian B third-order base level curve. This difference is attributed to a more rapid rise of base level in the Westphalian B. The stratigraphic and spatial distribution of coal sulphur has been used as a guide to prediction of reserve identification for surface mining operations.     

The use of ultra-sound in the preparation of carbonate and clay sediments for chironomid analysis

Initial investigations of Holocene carbonate sediment from Hawes Water, Northwest England, yielded lower numbers of chironomid head capsules than anticipated. Standard techniques used to prepare sediment for chironomid analysis were ineffective in breaking up the coarse crystalline sediment structure sufficiently. This led to large amounts of sediment being retained and increased sample processing times. The low yield of head capsules also meant that more sediment was needed to produce adequate numbers of head capsules for analysis. The use of ultra-sound as part of the sediment processing was investigated. This technique reduced the amount of sediment left for sorting and yielded significantly more head capsules which were of equivalent structural condition and cleaner than those produced by conventional methods. The technique was extended to clay samples where similar results were obtained although shorter treatment times are recommended. The proportion of Tanytarsini and Tanypodinae heads increased significantly in carbonate and clay samples, respectively; both sediment types showed a significant decline in the proportion of Chironomini. The results indicate that ultra-sonic preparation of samples will yield a more accurate representation of chironomid assemblages in sediments leading to greater sensitivity and reliability in analysing past environmental conditions.     

Metamorphic consequences of crustal eclogite production in overthrust orogenic zones

Continental collision can produce crust of much greater than normal thickness in whose lower part eclogite facies conditions may pertain. The resulting density increase of ca. 0.3 Mg m^?3 greatly decreases the buoyancy forces normally regarded as inhibiting the subduction of continental material. The high-density phase may persist for tens of millions of years giving anomalously low surface elevation of the thickened continent and inhibiting erosion.Temperature relaxation in the overthrust pile produces regional metamorphism. The conditions of metamorphism are analysed in terms of varying initial thermal gradient, erosion rate constant and the presence or absence of the eclogite transition. The suite of recorded metamorphic P-T conditions, called the piezothermic array has a slope which is insensitive to the variable conditions. High-temperature metamorphic rocks can be produced either by high initial thermal gradient or by relatively slow erosion of eclogite-weighted crust: to distinguish these causes, details of the chronology of metamorphic recrystallization are required.     

Textural evidence bearing on the origin of isolated olivine crystals in C2 carbonaceous chondrites

In some cases the mechanical competence of chondrules in carbonaceous chondrites has been reduced by alteration of their mesostasis glass to friable phyllosilicate, providing a mechanism by which euhedral olivines can be separated from chondrules. Morphological features of isolated olivine grains found in carbonaceous chondrites are similar to those of olivine phenocrysts in chondrules. These observations suggest that the isolated olivine grains formed in chondrules, by crystallization from a liquid, rather than by condensation from a vapor.     

Apparent stress and stress drop for intraplate earthquakes and tectonic stress in the plates

The magnitude of shear stress in the lithosphere is bounded from below by the apparent stress and stress drop during intraplate earthquakes. Apparent stresses and stress drops for a number of mid-plate earthquakes are calculated from the earthquake magnitude, SH wave amplitude spectra, and estimates of the length of the fault zone. Apparent stresses vary between 0.1 and 2 bars, ifm _b is used as a measure of seismic energy, and stress drops lie between 2 and 70 bars. There is no systematic difference in either apparent stress or stress drop between these intraplate events and typical plate boundary earthquakes. These bounds on intraplate shear stresses are consistent with the inference from current models of plate tectonic driving forces that regional stress differences in the plates are typically on the order of 100 bars. The highest stress drops measured for midplate earthquakes under this model represent nearly total release of local tectonic stress.