On sexual dimorphism in Paleoparadoxia tabatai

Abstract Upon studying the well preserved skulls referred to Paleoparadoxia tabatai from Japan, the short and low skull of the Yanagawa specimen requires an explanation. Six cranial and dental characters lead us to suggest that the Yanagawa individual is a female while the Izumi, Ohnohara, and Itsukaichi skulls are male. The important characters in the Yanagawa skull are its shortness and shallow depth, less pronounced sagittal and nuchal crests, smaller zygoma, and the small dentition with especially poorly erupted canines, most of which are indicative of weak masticatory musculature.     

Emplacement processes of proto-arc basalt in the Izu–Bonin–Mariana arc system

Ascertaining the emplacement mechanism of oceanic basaltic lavas is important in understanding how ocean floor topography is produced and oceanic plates evolve, particularly during the early stages of crustal development of a supra-subduction zone. A detailed study of the volcanic stratigraphy at International Ocean Discovery Program (IODP) Site U1438 in the Amami Sankaku Basin, west of the Kyushu–Palau Ridge, has revealed the development of lava accretion and ridge topography on the Philippine Sea plate at about 49 Ma. Igneous basement rocks penetrated at Site U1438 are the uppermost 150 m of ~6 km-thick oceanic crust, and comprise, in a downhole direction, sheet flows (12.6 m), lobate sheet flows (61.3 m), pillow lavas (50.7 m), and thin sheet flows (25.3 m). The lowermost sheet flows are intercalated with layers of limestone and epiclastic tuff. Lithofacies analysis reveals that the lowermost sheet flows, limestone, and tuff formed on an axial rise, the pillow lavas were emplaced on a ridge slope, and the lobate sheet flows formed off ridge on an abyssal plain. The lithofacies of the basement basalt corresponds to the upper portions of fast-spreading oceanic crust, suggesting that subduction initiation was associated with intermediate to fast rates of seafloor spreading. The surface sheet flows are olivine–clinopyroxene-phyric basalt and differ from the lower basalt flows that contain phenocrysts of olivine and plagioclase, with or without clinopyroxene. The depleted chrome-spinel composition and olivine–clinopyroxene phenocryst assemblage in the surface sheet flows suggests a slight contribution of water for magma generation not present for the lower basalt flows. Considering the lithological difference between the backarc and forearc oceanic crust in the Izu–Bonin–Mariana arc, with sheet flow dominant in the former, seafloor spreading occurred faster in the later stage of subduction initiation.     

Dilatancy of granular materials in a strain space multiple mechanism model

A granular material consists of an assemblage of particles with contacts newly formed or disappeared, changing the micromechanical structures during macroscopic deformation. These structures are idealized through a strain space multiple mechanism model as a twofold structure consisting of a multitude of virtual two‐dimensional mechanisms, each of which consists of a multitude of virtual simple shear mechanisms of one‐dimensional nature. In particular, a second‐order fabric tensor describes direct macroscopic stress–strain relationship, and a fourth‐order fabric tensor describes incremental relationship. In this framework of modeling, the mechanism of interlocking defined as the energy less component of macroscopic strain provides an appropriate bridge between micromechanical and macroscopic dilative component of dilatancy. Another bridge for contractive component of dilatancy is provided through an obvious hypothesis on micromechanical counterparts being associated with virtual simple shear strain. It is also postulated that the dilatancy along the stress path beyond a line slightly above the phase transformation line is only due to the mechanism of interlocking and increment in dilatancy due to this interlocking eventually vanishing for a large shear strain. These classic postulates form the basis for formulating the dilatancy in the strain space multiple mechanism model. The performance of the proposed model is demonstrated through simulation of undrained behavior of sand under monotonic and cyclic loading. Copyright © 2010 John Wiley & Sons, Ltd.     

Did boninite originate from the heterogeneous mantle with recycled ancient slab?

Boninites are widely distributed along the western margin of the Pacific Plate extruded during the incipient stage of the subduction zone development in the early Paleogene period. This paper discusses the genetic relationships of boninite and antecedent protoarc basalt magmas and demonstrates their recycled ancient slab origin based on the T–P conditions and Pb–Hf–Nd–Os isotopic modeling. Primitive melt inclusions in chrome spinel from Ogasawara and Guam islands show severely depleted high‐SiO₂, MgO (high‐silica) and less depleted low‐SiO₂, MgO (low‐silica and ultralow‐silica) boninitic compositions. The genetic conditions of 1 346 °C at 0.58 GPa and 1 292 °C at 0.69 GPa for the low‐ and ultralow‐silica boninite magmas lie on adiabatic melting paths of depleted mid‐ocean ridge basalt mantle with a potential temperature of 1 430 °C in Ogasawara and of 1 370 °C in Guam, respectively. This is consistent with the model that the low‐ and ultralow‐silica boninites were produced by remelting of the residue of the protoarc basalt during the forearc spreading immediately following the subduction initiation. In contrast, the genetic conditions of 1 428 °C and 0.96 GPa for the high‐silica boninite magma is reconciled with the ascent of more depleted harzburgitic source which pre‐existed below the Izu–Ogasawara–Mariana forearc region before the subduction started. Mixing calculations based on the Pb–Nd–Hf isotopic data for the Mariana protoarc basalt and boninites support the above remelting model for the (ultra)low‐silica boninite and the discrete harzburgite source for the high‐silica boninite. Yb–Os isotopic modeling of the high‐Si boninite source indicates 18–30 wt% melting of the primitive upper mantle at 1.5–1.7 Ga, whereas the source mantle of the protoarc basalt, the residue of which became the source of the (ultra)low‐Si boninite, experienced only 3.5–4.0 wt% melt depletion at 3.6–3.1 Ga, much earlier than the average depleted mid‐ocean ridge basalt mantle with similar degrees of melt depletion at 2.6–2.2 Ga.     

New heat flow measurements in the Ulleung Basin, East Sea (Sea of Japan): relationship to local BSR depth, and implications for regional heat flow distribution

In July 2007, new marine heat flow data were collected at ten sites (HF01–10) in the central and southwestern sectors of the Ulleung Basin (East Sea or Sea of Japan) as part of regional gas hydrate research. In addition, cores were collected at five of these sites for laboratory analysis. The results show that the geothermal gradient ranged from 103–137 mK/m, and the in-situ thermal conductivity from 0.82–0.95 W/m·K. Laboratory measurements of thermal conductivity were found to deviate by as much as 40% from the in-situ measurements, despite the precautions taken to preserve the cores. Based on the in-situ conductivity, the heat flow was found to increase with water depth toward the center of the basin, ranging from 84–130 mW/m². Using a simple model, we estimated the heat flow from the depths of the BSR, and compared this with the observed heat flow. In our study area, the two sets of values were quite consistent, the observed heat flows being slightly higher than the BSR-derived ones. The evaluation of regional pre-1994 data revealed that the heat flow varied widely from 51–157 mW/m² in and around the basin. Due to a large scatter in these older data, a clear relationship between heat flow and water depth was not evident, in contrast to what would be expected for a rifted sedimentary basin. This raises the question as to whether the pre-1994 data represent the true background heat flow from the underlying basin crust since the basin opening, and/or whether they contain large measurement errors. In fact, evidence in support of the latter explanation exists. BSRs are generally found in the deep parts of the basin, and vary by only ±15 m in depth below the seafloor. From the average BSR depth, we inferred the background heat flow using a simple model, which in the case of the Ulleung Basin is approximately 120 and 80 mW/m² for 2.5 and 1 km below sea level, respectively.     

Continental basalts in the accretionary complexes of the South-west Japan Arc: Constraints from geochemical and Sr and Nd isotopic data of metadiabase

Abstract The Ryoke Belt is one of the important terranes in the South‐west Japan Arc (SJA). It consists mainly of late Cretaceous granitoid rocks, meta‐sedimentary rocks (Jurassic accretionary complexes) and mafic rocks (gabbros, metadiabases; late Permian–early Jurassic). Initial ?_Sr (+ 25– + 59) and ?_Nd (? 2.1–?5.9) values of the metadiabases cannot be explained by crustal contamination but reflect the values of the source material. These values coincide with those of island arc basalt (IAB), active continental margin basalt (ACMB) and continental flood basalt (CFB). Spiderdiagrams and trace element chemistries of the metadiabases have CFB‐signature, rather than those of either IAB or ACMB. The Sr–Nd isotope data, trace element and rare earth element chemistries of the metadiabases indicate that they result from partial melting of continental‐type lithospheric mantle. Mafic granulite xenoliths in middle Miocene volcanic rocks distributed throughout the Ryoke Belt were probably derived from relatively deep crust. Their geochemical and Sr–Nd isotopic characteristics are similar to the metadiabases. This suggests that rocks, equivalent geochemically to the metadiabases, must be widely distributed at relatively deep crustal levels beneath a part of the Ryoke Belt. The geochemical and isotopic features of the metadiabases and mafic granulites from the Ryoke Belt are quite different from those of mafic rocks from other terranes in the SJA. These results imply that the Ryoke mafic rocks (metadiabase, mafic granulite) were not transported from other terranes by crustal movement but formed in situ. Sr–Nd isotopic features of late Cretaceous granitoid rocks occurring in the western part of the Japanese Islands are coincident with those of the Ryoke mafic rocks. Such an isotopic relation between these two rocks suggests that a continental‐type lithosphere is widely represented beneath the western part of the Japanese Islands.