Fluids in the lithosphere, 2. Experimental constraints on CO2 transport in dunite and quartzite at elevated P-T conditions with implications for mantle and crustal decarbonation processes

In a series of experiments at 0.5–1.3 GPa and 1050–1200°C we have monitored the transport, via crack propagation, of CO₂ into well-annealed olivine and quartz aggregates. The objectives were to determine (1) the extent and rate of fluid penetration; (2) the effect of varying both P-T conditions and microstructure; and (3) the fluid penetration pathways. Experiments on CO₂ penetration into dunite annealed in the absence of MgO indicate rapid and pervasive fluid transport on a grain-dimension scale, but a limited penetration distance ( 1 mm). Additional experiments on dunite annealed in the presence of MgO (either dispersed or present at both ends), however, resulted in CO₂ penetration that was both pervasive on the scale of individual grains and almost always completely through the 5 mm long samples. The abundance of fine (10 μm) grains in the MgO-free dunite, in contrast to the much larger grain sizes of the samples annealed with MgO present, suggests the difference in fluid penetration behavior may arise because the strength variation in dunite scales with the grain size. Effects arising from changes in olivine point defect chemistry, however, are an additional possibility. The response of synthetic quartzite to CO₂ overpressure is distinct from that of dunite: Quartzite experiences rapid and complete penetration of CO₂, via a macroscopically visible system of transgranular fractures, over the range of P-T conditions investigated.The small amount of porosity ( 2–3%) present in most rock samples fabricated for this study, lacks three-dimensional connectivity, thus precluding any enhanced fluid penetration via porous flow. Pores could possibly enhance fluid penetration as the result of a small reduction in resistance to fracture, but the probable abundance of strength-controlling flaws in natural rocks is likely to produce similar behavior.The results of our experiments on olivine and olivine + MgO suggest that the transport of pressurized CO₂ in very olivine-rich mantle environments will be pervasive on the scale of individual grains and its extent may be dependent on rock microstructure and/or crystal chemical effects. Such pervasive fluid transport, perhaps associated with magma decarbonation, may have interesting implications for both magma transport and local LREE enrichment of adjacent mantle wall-rock. The ease with which quartzite is penetrated by CO₂ at the conditions of our experiments underscores the possible role of decarbonation reactions in crustal permeability-enhancement processes.     

An investigation of the controls on Irish precipitation δ18O values on monthly and event timescales

This two-year study investigates the relative influence of meteorological variables (precipitation amount and temperature), atmospheric circulation, air mass history, and moisture source region on Irish precipitation oxygen isotopes (δ¹⁸O_p) on event and monthly timescales. Single predictor correlations reveal that on the event scale, 20% of δ¹⁸O_p variability is attributable to the amount effect and 7% to the temperature effect while on the monthly timescale the North Atlantic Oscillation accounts for up to 20% of δ¹⁸O_p variability and the amount and temperature effects are not significant. In comparison, multivariate linear regression reveals that the interaction of temperature and precipitation amount explains up to 40% of δ¹⁸O_p variance at event and monthly timescales. Five-day kinematic back trajectories suggest that the amount-weighted mean δ¹⁸O_p value of southerly- and northerly-derived events are lower by 2‰ relative to events derived from the west. Because air mass history and atmospheric circulation appear to influence δ¹⁸O_p in Ireland, Irish paleo-δ¹⁸O_p proxy records are best interpreted as reflecting a combination of parameters, not just paleotemperature or paleorainfall.     

Field observations of waves generated by passing ships: A note

This short contribution reports the results of a field study on the nearshore characteristics of waves generated by both conventional and high speed passenger ferries. The field observations took place in the late summer of 2005, at a beach close to the port of Mytilene (Island of Lesbos, Greece), and involved the visual observation of ship waves, using digital video recordings and image processing techniques. The results showed that passage of the fast ferry was associated with a longer, more complex and energetic nearshore event; this event not only did include higher nearshore waves (up to 0.74 m) and was organised in different wave packets, but it was also an order of magnitude longer (∼ 680 s) than the conventional ferry event. Regarding the effects on beach sediment dynamics, the fast ferry waves were estimated to be very efficient in mobilising the nearshore sediments in contrast to those of the conventional ferry. The fast ferry service appears to generate daily prolonged nearshore events, which contain waves with higher energy than those expected from the normal summer wind wave regime of the area; these events also include some high and very steep waves, which can be particularly erosive. Therefore, fast ferry wakes may have considerable impacts on the seasonal beach sediment dynamics/morphodynamics and the nearshore benthic ecology, as well as they may pose significant risks to bathers, affecting the recreational use of the beaches exposed to fast ferry traffic. Finally, the study has shown that satisfactory field observations of the nearshore characteristics of ship-generated (and wind) waves can be obtained using inshore deployments of calibrated poles, digital video cameras and appropriate image processing algorithms.     

Volcano-tectonic controls and emplacement kinematics of the Iriga debris avalanches (Philippines)

Mt Iriga in southeastern Luzon is known for its spectacular collapse scar that was possibly created in 1628 ad by a 1.5-km³ debris avalanche. The debris avalanche deposit (DAD) covered 70?km² and dammed the Barit River to form Lake Buhi. The collapse has been ascribed to a non-volcanic trigger related to a major strike-slip fault under the volcano. Using a combination of fieldwork and remote sensing, we have identified a similar size, older DAD to the southwest of the edifice that originated from a sector oblique to the underlying strike-slip fault. Both deposits cover wide areas of low, waterlogged plains, to a distance of about 16?km for the oldest and 12?km for the youngest. Hundreds of metre-wide and up to 50-m-high hummocks of intact conglomerate, sand and clay units derived from the base of the volcano show that the initial failure planes cut deep into the substrata. In addition, large proportions of both DAD consist of ring-plain sediments that were incorporated by soft-sediment bulking and extensive bulldozing. An ignimbrite unit incorporated into the younger DAD forms small (less than 5?m high) discrete hummocks between the larger ones. Both debris avalanches slid over water-saturated soft sediment or ignimbrite and spread out on a basal shear zone, accommodated by horst and graben formation and strike-slip faults in the main mass. The faults are listric and flatten into a well-developed basal shear zone. This shear zone contains components from the substrate and has a diffuse contact with the intact substrata. Long, transport-normal ridges in the distal parts are evidence of compression related to deceleration and bulldozing. The collapse orientation and structure on both sectors and DAD constituents are consistent with collapse being a response to combined transtensional faulting and gravity spreading. Iriga can serve as a model for other volcanoes, such as Mayon, that stand in sedimentary basins undergoing transtensional strike-slip faulting.     

Integration of remote sensing data into hydrological models for reservoir management

Abstract

The purpose of this paper is to present the methodology set up to derive catchment soil moisture from Earth Observation (EO) data using microwave spaceborne Synthetic Aperture Radar (SAR) images from ERS satellites and to study the improvements brought about by an assimilation of this information into hydrological models. The methodology used to derive EO data is based on the appropriate selection of land cover types for which the radar signal is mainly sensitive to soil moisture variations. Then a hydrological model is chosen, which can take advantage of the new information brought by remote sensing. The assimilation of soil moisture deduced from EO data into hydrological models is based principally on model parameter updating. The main assumption of this method is that the better the model simulates the current hydrological system, the better the following forecast will be. Another methodology used is a sequential one based on Kalman filtering. These methods have been put forward for use in the European AIMWATER project on the Seine catchment upstream of Paris (France) where dams are operated to alleviate floods in the Paris area.     

Diagnostic monitoring of a changing environment: an alternative UK perspective

Adaptive management of the marine environment requires an understanding of the complex interactions within it. Establishing levels of natural variability within and between marine ecosystems is a necessary prerequisite to this process and requires a monitoring programme which takes account of the issues of time, space and scale. In this paper, we argue that an ecosystem approach to managing the marine environment should take direct account of climate change indicators at a regional level if it is to cope with the unprecedented change expected as a result of human impacts on the earth climate system. We discuss the purpose of environmental monitoring and the importance of maintaining long-term time series. Recommendations are made on the use of these data in conjunction with modern extrapolation and integration tools (e.g. ecosystem models, remote sensing) to provide a diagnostic approach to the management of marine ecosystems, based on adaptive indicators and dynamic baselines.     

Stiffness identification of a tall building during construction period using ambient tests

Ambient response measurements were made on an eighteen-storey building at three different stages of construction to detect any changes in the frequencies, mode shapes and stiffness with construction. The first nine frequencies and corresponding mode shapes for each stage of construction are found. A comparison is made among these mode shapes and frequencies and with the mode shapes and frequencies of an analytical model incorporating beams, columns, shear walls, panels and diagonal elements. The added effects, on frequencies and mode shapes, of non-structural elements such as stairs, elevators, claddings and partition walls are studied. Using Improved Statistical Structural Identification, an attempt is made to study the stiffening effect of non-structural elements by updating the stiffness matrix of the building.     

Petrology of the Easter microplate region in the South Pacific

Submersible investigations along the East Rift segments, the Pito Deep and the Terevaka transform fault of the Easter microplate eastern boundary, and on a thrust-fault area of the Nazca Plate collected a variety of basalts and dolerites. The volcanics consist essentially of depleted (N-MORB), transitional (T-MORB) and enriched (E-MORB) basalts with low (0.01−0.1, < 0.7), intermediate (0.12–0.25, 0.7–1.2) and high (> 0.25, > 1.2–2) K/Ti and(La/Sm)_N ratios, respectively. The Fe-Ti-rich ferrobasalt encountered among the N-MORBs are found on the Pito Deep Central volcano, on the Terevaka intra-transform ridge, on the ancient (< 2.5 Ma) Easter microplate (called EMP, comprising the East Rift Inner pseudofaults and Pito Deep west walls) and on thrust-fault crusts. The most enriched (T- and E-MORB) volcanics occur along the East Rift at 25 °50′–27 °S (called 26 °S East Rift) and on the Pito seamount located near the tip of the East Rift at 23 °00′–23 °40′S (called 23 °S East Rift). The diversity in incompatible element ratios of the basalts in relation to their structural setting suggests that the volcanics are derived from a similar heterogenous mantle which underwent variable degrees of partial melting and magma mixing. In addition the Pito seamount volcanics have undergone less crystal fractionation (< 20%) than the lavas from the other Easter microplate structures (up to 35–45%). The tectonic segmentation of the East Rift observed between 23 and 27 °S corresponds to petrological discontinuities related to Mg# variations and mantle melting conditions. The highest Mg# (> 61) are found on topographic highs (2000–2300 m) and lower values (Mg# < 56) at the extremities of the East Rift segments (2500–5600 m depths). The deepest area (5600 m) along the East Rift is located at 23 °S and coincides with a Central volcano constructed on the floor of the Pito Deep. Three major compositional variabilities of the volcanics are observed along the East Rift segments studied: (1) the 26 °S East Rift segment where the volcanics have intermediate Na₈ (2.5–2.8%) and Fe₈ (8.5–11%) contents; (2) the 23 °S East Rift segment (comprising Pito seamount and Pito Deep Central volcano) which shows the highest (2.9–3.4%) values of Na₈ and a low (8–9%) Fe₈ content; and (3) the 25 °S (at 24 °50′–26 °10′S) and the 24 °S (at 24 °10′–25 °S) East Rift segments where most of the volcanics have low to intermediate Na₈ (2.6–2.0%) and a high range of Fe₈ (9–13%) contents. When modeling mantle melting conditions, we observed a relative increase in the extent of partial melting and decreasing melting pressure. These localized trends are in agreement with a 3-D type diapiric upwelling in the sense postulated by Niu and Batiza (1993). Diapiric mantle upwelling and melting localized underneath the 26, 25 and 23 °S (Pito seamount and Central volcano) East Rift segments are responsable for the differences observed in the volcanics. The extent of partial melting varies from 14 to 19% in the lithosphere between 18 and 40 km deep as inferred from the calculated initial (P_o=16kbar) and final melting (P_f=7kbar) pressures along the various East Rift segments. The lowest range of partial melting (14–16%) is confined to the volcanics from 23 °S East Rift segment including the Pito seamount and the Central volcano. The Thrust-fault area, and the Terevaka intra-transform show comparable mantle melting regimes to the 25 and 26 °S East Rift segments. The older lithosphere of the EMP interior is believed to have been the site of high partial melting (17–20%) confined to the deeper melting area (29–50 km). This increase in melting with increasing pressure is similar to the conditions encountered underneath the South East Pacific Rise (13–20 °S).     

Current Scientific and Applied Problems of River Mouth Hydrology

Water Resources - The current state, the hydrological problems of river mouths, and the history of their studies as specific geographic objects are discussed, and the main lines and schools of...