Pulsations of optical radiation during the flare of YZ CMi occurred on February 9, 2008

One of the most powerful and long-lived flares on the active red dwarf YZ CMi is considered. The flare was observed in the U band at the Terskol Peak Observatory on February 9, 2008. During the formation of the flare over the course of 30 seconds, the flare-induced stellar luminosity increased and became more than 180 times the preflare value. The total duration of the flare was approximately one hour. At the flare maximum, quasi-periodic pulsations having a specified period of approximately 11 s, an initial modulation depth of 5.5%, and an exponential damping time of 29 s were discovered using wavelet analysis. Assuming that the pulsations were caused by fast magnetohydrodynamic oscillations of a flare loop, the following parameters were determined in the region of energy release using coronal seismology methods: plasma concentration (2 × 10¹⁰ cm⁻³), temperature (3 × 10⁷ K), and magnetic field strength (0.015 T).     

Fluid and source magma evolution of the Questa porphyry Mo deposit,New Mexico,USA

Combined fluid inclusion microthermometry and microanalysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) are used to constrain the hydrothermal processes forming a typical Climax-type porphyry Mo deposit. Molybdenum mineralisation at Questa occurred in two superimposed hydrothermal stages, a magmatic-hydrothermal breccia and later stockwork veining. In both stages, texturally earliest fluids were single-phase, of low salinity (~7 wt.% NaCl_equiv.) and intermediate-density. Upon decompression to ~300 bar, they boiled off a vapour phase, leaving behind a residual brine (up to 45 wt.% NaCl_equiv) at temperatures of ~420°C. The highest average Mo concentrations in this hot brine were ~500 μg/g, exceeding the Mo content of the intermediate-density input fluid by about an order of magnitude and reflecting pre-concentration of Mo by fluid phase separation prior to MoS₂ deposition from the brine. Molybdenum concentrations in brine inclusions, then, decrease down to 5 μg/g, recording Mo precipitation in response to cooling of the saline liquid to ~360°C. Molybdenite precipitation from a dense, residual and probably sulphide-depleted brine is proposed to explain the tabular shape of the ore body and the absence of Cu-Fe sulphides in contrast to the more common Cu-Mo deposits related to porphyry stocks. Cesium and Rb concentrations in the single-phase fluids of the breccia range from 2 to 8 and from 40 to 65 μg/g, respectively. In the stockwork veins, Cs and Rb concentrations are significantly higher (45–90 and 110–230 μg/g, respectively). Because Cs and Rb are incompatible and hydrothermally non-reactive elements, the systematic increase in their concentration requires two distinct pulses of fluid exsolution from a progressively more fractionated magma. By contrast, major element and ore metal concentrations of these two fluid pulses remain essentially constant. Mass balance calculations using fluid chemical data from LA-ICPMS suggest that at least 25 km³ of melt and 7 Gt of deep input fluid were necessary to provide the amount of Mo contained in the stockwork vein stage alone. While the absolute amounts of fluid and melt are uncertain, the well-constrained element ratios in the fluids together with empirical fluid/melt partition coefficients derived from the inclusion analyses suggest a high water content of the source melt of ~10%. In line with other circumstantial evidence, these results suggest that initial fluid exsolution may have occurred at a confining pressure exceeding 5 kbar. The source of the molybdenum-mineralising fluids probably was a particularly large magma chamber that crystallised and fractionated in the lower crust or at mid-crustal level, well below the shallow intrusions immediately underlying Questa and other porphyry molybdenum deposits. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The palaeoenvironmental and palaeohydrological evolution of Padul Peat Bog (Granada, Spain) over one million years, from elemental, isotopic and molecular organic geochemical proxies

The elemental (concentration of organic carbon, atomic H/C and C/N ratios), isotopic (δ¹³C values of organic matter) and molecular (predominant n-alkane chain length and carbon preference index (CPI)) organic components were measured for 600 samples taken from a 107-m long core from the Padul Basin (Andalusia, Spain). The record runs from the Lower Pleistocene (ca. 1 Ma B.P.) to the mid-Holocene (ca. 4.5 ka B.P.) with, in general, little diagenesis (removal of components). Two markedly different hydrogeological scenarios were interpreted: (1) From ca. 1 Ma to ca. 400 ka B.P. run-off recharge was significant and water depths were greater (lacustrine scenario). From ca. 400 to 4.5 ka B.P., the Padul Basin became a peat bog s.s. with the major water input coming from groundwater inflow. From ca. 400 to ca. 180 ka B.P. alternating episodes with either predominant grasses, trees or aquatic macrophytes which were linked to wet/dry phases, took place. An important deglaciation episode has been interpreted to occur between ca. 180 and 170 ka B.P. The global climatic changes occurring from ca. 170 to 25 ka B.P. were not recorded in the proxies, though they do show important variations linked to the Last Glacial Maximum and the beginning of the Holocene (ca. 25–10 ka B.P.): (2) Cold phases coexisting with dry periods produced the recession of forests and the development of grasses. After these periods, as both temperature and precipitation increased, forests expanded and the water level, linked to thaw, rose, especially at ca. 20 ka B.P. Few changes occurred during the Holocene, although there were short alternations between wet and dry episodes. Overall, the techniques applied proved to be excellent palaeoenvironmental proxies for studying the basin’s palaeoclimatological and palaeohydrological evolution.     

Soil contamination from urban and industrial activity: example of the mining district of Linares (southern Spain)

The Linares region (southern Spain) has been subjected to two important sources of pollution: the intensive mining works and the urban-industrial activity. To obtain a geochemical characterisation of the soil, 31 trace elements were analysed and 669 soil samples were collected. By means of clustering analysis, we identified groups of elements and grid squares in which relations could be established concerning soil lithology, urban and industrial activities and the degree of pollution impact; in addition, we were able to characterise the geochemical background of the study area. The multivariate study led us to identify four factors. Particularly important was factor 2, which represented the elements associated with mineral paragenesis (Cu, Pb, As, Co, Mn, Zn, Sn, Ba). This factor also contains elements related with an urban-industrial activity, such as Pb, Cu, Zn, As and Ba. Furthermore, we identified factor 4, associating Ni, V and Cr, and which is related to the use of fuels.     

Microtectonic and geochemical characterization of thrusting in a foreland basin: Example of the South-Pyrenean orogenic wedge (Spain)

In orogenic systems, thrust faults play a major role in stacking different tectonic units and may act as conduits for the expulsion of large amounts of fluid of different origins (metamorphic, diagenetic, meteoric). This study focuses on the Monte Perdido thrust unit emplaced in the Paleogene Jaca thrust-sheet-top basin, in the SW-central Pyrenees. We aim to decipher the mechanisms and P-T conditions of deformation in fault zones and characterize the related fluid involvement, through combined microstructural, geochemical and microthermometry analyses. Two thrust faults cutting platform limestones, marls and siliciclastic turbidites of the lower part of the basin-fill (Paleocene–lower Eocene) have been studied. The fault zones are characterized by metre-thick shear zones with highly deformed, foliated clay-rich sediments. Foliation is underlined by preferentially oriented phyllosilicates. Several generations of shear and extension calcite, quartz and chlorite-bearing veins attest to fluid-rock interactions during a multi-stage deformation. Microstructural observations and stable isotope analyses on calcite from veins and host sediments suggest that deformation was aseismic and dominated by diffusive mass transfer from pressure solution sites along cleavage and stylolites to the precipitation sites in veins, with mineralizing fluids in equilibrium with the host sediments. Our results suggest an essentially closed hydrologic system, and imply the absence of significant fluid flow along the studied fault zones. Microthermometric study on fluid inclusions present in calcite and quartz veins, and calcite-quartz oxygen isotopic fractionation determined for the first generation shear veins, allow a geothermal gradient of 34 °C/km to be estimated. Analytical results demonstrate an evolution of the fault zones in three stages. The first stage was related to the emplacement of the Monte Perdido thrust unit during the middle Eocene at a temperature of ～208 °C and a burial depth of ～5.7 km. The second stage corresponds to a fault reactivation at a temperature of ～240 °C and a burial depth of ～6.5 km. The latter deformation may have been related to folding of the Monte Perdido thrust unit during the emplacement of the underlying Gavarnie thrust unit during the late Eocene–early Oligocene, with deeper burial resulting from aggradation of the thrust-sheet-top basin-fill. The last event corresponds to the formation of a dilatant vein system likely related to the exhumation of the massif.     

Evaluation of cold-water carbonates as a possible paleoclimatic indicator

The common belief currently shared by many geoscientists concerning the climatic interpretation of limestones is that a warm-water environment is essential. This concept is not necessarily true because the rate and extent of terrigenous sediment dilution, rather than water temperature, is the primary factor determining whether or not a limestone forms at nearshore or continental shelf depths. Because carbonate productivity is lowest in cold climates, however, CaCO₃ abundance and the thickness of carbonate accumulations tend to be least at high latitudes. In this regard present-day continental shelves and beaches offer a poor model for comparing cold-water and warm-water carbonates because of the generally emergent continental tectonic framework, recent eustatic sea-level changes, and the presence of ice caps at the modern poles.Typically, the influence of climate on non-reef continental shelf and beach environments cannot be clearly distinguished by the presence or absence of major taxonomic groups. Faunal diversity and equitability are more sensitive in this regard. The absence of shelf-depth inorganic carbonate precipitates, micrite envelopes, and peloids may also point to the cold-water origin of a rock. Skeletal mineralogy and oxygen isotopes of certain unrecrystallized carbonates may be good paleoclimatic indicators; however, trace elements and physical-textural attributes of the carbonate fraction are probably temperature insensitive.Previous studies of high-latitude continental shelves have concentrated merely on the abundance of calcareous material and there is seemingly a disproportionate amount of information with respect to low-latitude carbonate studies. Further research on cold-water carbonates may open up new avenues for alternative paleoenvironmental and paleoclimatic interpretations.     

High-resolution spectroscopy of ROSAT-discovered weak-line T Tauri stars near Lupus

We present high-resolution optical echelle spectroscopy for a large fraction of the Li-rich late-type stars recently discovered in the vicinity of the Lupus dark clouds. Our results confirm the high Li  i   λ 6708 equivalent widths previously estimated from medium-resolution spectra, thus adding strength to the conclusion that the large majority of these stars are still in the pre-main-sequence phase of their evolution, contrary to claims from other authors that many of them might be zero-age main-sequence stars. We present a statistical approach to derive a mean distance for the sample, and find that it is consistent with, or slightly lower than, the Hipparcos distance of the Lupus star-forming region. The radial velocities measured for part of these stars are consistent with those observed for the Lupus star-forming region, while stars outside the dark clouds show a mean difference of the order of 3 km s⁻¹. The projected rotational velocities show a lack of slow rotators, which is interpreted as a consequence of the X-ray selection of the sample. The Li-rich stars in Lupus studied in this work yield a fairly 'clean' sample of very young stars, while in other star-forming regions a larger fraction of older zero-age main-sequence stars has been found among ROSAT -discovered Li-rich stars. We argue that this fact reflects the relation of these stars with the Gould Belt.     

Vulnerability and fate of a coastal sand dune complex,Rosetta-Idku,northwestern Nile Delta,Egypt

Types, distribution, and origin of recent sand dunes between Rosetta and Idku, in the western sector of the Nile Delta, Egypt were investigated. Sand samples from the dunes, beach, and seafloor were studied for grain size distribution and mineralogical composition. It has been found that most of the dunes in the study area have been subjected to deterioration and removal due to the construction of buildings and the International Coastal Highway. The remnant constitutes a damaged belt of foredunes that extends from El Bouseily village to the west of Idku town. The dune’s origin is interpreted to be the result of coastal drifting and the subsequent transport of sediments of the former Canopic Nile branch eastward by the predominant longshore current and by aeolian processes. The blown sand grains accumulated to form a belt of coastal sand dunes of original longitudinal and crescentic forms. Urbanization of the coast has severely altered the landscape. The study area is considered vulnerable to the impacts of climate change and the expected rise in sea level. The outcome of potential sea level rise is serious; erosion problems are expected to be exacerbated and vast areas from land and property would be lost. Thus, protection and preservation the remaining dunes in the study area are vital requirements for shore protection.