Seismic anisotropy within the uppermost mantle of southern Germany

This paper presents an updated interpretation of seismic anisotropy within the uppermost mantle of southern Germany. The dense network of reversed and crossing refraction profiles in this area made it possible to observe almost 900 traveltimes of the P_n phase that could be effectively used in a time-term analysis to determine horizontal velocity distribution immediately below the Moho. For 12 crossing profiles, amplitude ratios of the P_n phase compared to the dominant crustal phase were utilized to resolve azimuthally dependent velocity gradients with depth. A P -wave anisotropy of 3–4 per cent in a horizontal plane immediately below the Moho at a depth of 30 km, increasing to 11 per cent at a depth of 40 km, was determined. For the axis of the highest velocity of about 8.03 km s⁻¹ at a depth of 30 km a direction of N31°F was obtained. The azimuthal dependence of the observed P_n amplitude is explained by an azimuth-dependent sub-Moho velocity gradient decreasing from 0.06 s⁻¹ in the fast direction to 0 s⁻¹ in the slow direction of horizontal P -wave velocity. From the seismic results in this study a petrological model suggesting a change of modal composition and percentage of oriented olivine with depth was derived.     

Multifractal analysis of the spatial distribution of earthquakes in southern Italy

We evaluate the complete spectrum of the generalized fractal dimension of the spatial pattern of microearthquakes in Southern Italy, revealing a multifractal distribution structure. Our analysis is focused on the dependence of the multifractal distribution on the size of the selected area and the kind of seismicity in the area. As the size of the window varies, we observe that the capacity, information and correlation dimensions vary significantly, while both d _∞ and d _−infin; remain unchanged within their errors limits. We interpret this result in terms of the observation that our data are mainly clustered around a linear fault (the Sisifo fault). When we restrict the selected windows around the fault, clustering around a line (the fault) is highlighted. The capacity dimension changes from about 1.8 to about 1.4 and the correlation dimension decreases because we observe in detail the clustering of the seismicity along the fault, which approximates the maximum intense clustering of the whole data set. Although our results are strongly influenced by the fact that the data are dominated by the epicentres located on the fault, we can conclude that multifractal analysis can be a very useful tool to discriminate the seismicity linked to a particular fault in a given area.     

Distribution and morphology of sinkholes triggered by flooding following Tropical Storm Alberto at Albany, Georgia, USA

Flooding of the Flint River in July 1994 triggered the collapse of at least 312 sinkholes in the karstic Dougherty Plain at Albany, Georgia. We examined the distribution and morphology of these new sinkholes to evaluate the mode of formation, to characterize early stages of the evolution of sinkhole form, and to estimate the lowering of the surface associated with the development of new sinkholes.Eighty-eight percent of sinkholes occur inside the limits of flooding, especially in areas of sandy overburden, and they often follow joint-controlled linear trends. Sinkhole dimensions are log-normally distributed with median values of circumference = 5.7 m, length = 1.8 m, width = 1.6 m, and depth = 0.7 m; asymmetry (L:W) = 1.2. Cross-sectional forms range from narrow cylinders to large bowls, with many sinkholes having undercut sides.Flooding triggered the formation of sinkholes by saturating and liquefying overburden, which caused soil arches to collapse and flow into cavities in bedrock. The prevalence of sinkholes near the periphery of flooding suggests that drainage and loss of buoyant support as flood waters subsided may also have contributed to failure. A volume ratio index is used to quantify the three dimensional geometric form of sinkholes. Initially, small cylindrical shafts open over a bedrock joint, followed by progressive slumping that leads to widening and increases in volume to a final bowl form. Estimates of the aggregate volume of overburden transported underground in flooded areas range from 7,990 to 11,130 m3. Averaged over flooded areas, this accounts for 0.26 to 0.37 mm/km² lowering of the surface. Based on a 500 year recurrence interval for the flood event, values for lowering of the surface range from 0.52 to 0.74 mm per 1,000 years. These values are an order of magnitude less than estimates of carbonate dissolution and suggest that transport of overburden underground is limited by triggering events.     

Cation ordering of orthopyroxenes from the Skaergaard Intrusion: implications for the subsolidus cooling rates and permeabilities

 We have determined the quenched cation ordering states of five orthopyroxene crystals collected from the marginal border group and the lower zone a and b of the Skaergaard intrusion, and modeled these data to retrieve their closure temperatures (T _c) of Fe–Mg ordering and cooling rates. According to existing thermal models for the Skaergaard pluton, conductive cooling dominated the high and low temperature regimes, which were separated by an intermediate temperature regime in which the cooling was controlled primarily by convective fluid circulation. The cooling rates retrieved from the quenched cation ordering states of the orthopyroxene crystals strictly apply to temperatures around the closure temperatures of the ordering states, ∼340–400^° C, which fall at the transition from convective to the lower temperature conductive cooling. The cooling rates obtained from the cation ordering states of orthopyroxene vary from ∼1 to 270 K/ka. These results agree well with a thermal model calculated using an assumed average permeability of 10^-12 cm² for the pluton, but not completely with a model calculated on the basis of an average permeability of 10^-13 cm², although both values produced shifts of δ¹⁸O that are comparable to those observed in the pluton. Received: 27 February 1995/Accepted: 20 July 1995     

The first occurrence of platinum group minerals (PGM) in a chromite deposit in the Eastern Desert, Egypt

 The platinum-group mineralogy (PGM) of the chromitite from Gebel Lawi, in the southeastern desert has been investigated. The most abundant base metal sulfides (BMS) associated with the Lawi chromite are pentlandite, millerite and heazlewoodite. The major platinum-group minerals identified were as follows: laurite (IrOsRu)S2, osmian iridium (OsIr), hollingworthite (RhAsS), tellurian arsenopalladinite (PdTeSbAs), potarite (PdHg) besides cuprian palladian gold (CuPdAu), a Pd-Sb-Hg and HgTe phases. Laurite and osmian iridium occur preferentially in chromite. Os-Ir commonly forms composite PGM with laurite. Hollingworthite and tellurian arsenopalladinite are included within serpentine and, close to the base-metal sulfides, the cuprian palladian gold shares boundaries with chromite. Potarite together with the Pd-Sb-Hg and HgTe phases are embedded in serpentine. Palladium is the most abundant PGE in the Gebel Lawi chromite. A paragenetic sequence of PGM formation is described. Textural evidence indicates that Os-, Ir- and Ru-bearing PGM formed early and were followed by Rh- and Pd-bearing PGM. The concentration of all five PGE could be magmatic, but much of the PGE mineralogy except for laurite and osmian iridium in the center of chromite grains, has been modified by subsequent processes. At later stages, the environment became Te-, Sb-, As- and Hg-rich, which finally led to the formation of low-temperature alteration minerals. Received: 24 April 1995 / Accepted: 28 March 1996     

Late Cretaceous rift-related upwelling and melting of the Trindade starting mantle plume head beneath western Brazil

High mantle potential temperatures and local extension, associated with the Late-Cretaceous impact of the Trindade mantle plume, produced substantial widespread and voluminous magmatism around the northern half of the Paraná sedimentary basin. Our previous studies have shown that, above the central and eastern portions of the postulated impact zone where lithosphere extension is minimal, heat conducted by the plume caused large-scale melting of the more fusible parts of the subcontinental lithospheric mantle beneath the margin of the São Francisco craton and the surrounding Brasilía mobile belt. Here we combine geochemical data and field evidence from the Poxoreu Igneous Province, western Brazil to show how more intense lithospheric extension above the western margin of the postulated impact zone permitted greater upwelling and melting of the Trindade plume than further east. Laser ⁴⁰Ar/³⁹Ar age determinations indicate that rift-related basaltic magmas of the Poxoreu Igneous Province were emplaced at ? 84 Ma. Our detailed geochemical study of the mafic magmas shows that the parental melts underwent polybaric crystal fractionation within the crust prior to final emplacement. Furthermore, some magmas (quartz-normative) appear to have assimilated upper crust whereas others (nepheline- and hypersthene-normative) appear to have been unaffected by open-system crustal magma chamber processes. Incompatible trace element ratios (e.g. chondrite-normalised La/Nb?=?1) and isotopic ratios (⁸⁷Sr/⁸⁶Sr?=?0.704 and ¹⁴³Nd/¹⁴⁴Nd?=?0.51274) of the Hy-normative basalts resemble those of oceanic islands (OIB). We therefore propose that these “OIB-like” magmas were predominantly derived from convecting-mantle-source melts (i.e. Trindade mantle plume). Inverse modelling of rare-earth element (REE) abundances suggests that the initial melts were predominantly generated within the depth range of ?80–100 km, in mantle with a potential temperature of ?1500 °C.