An ocean-bottom hydrophone recorder for seismic refraction experiments

A new and inexpensive pop-up ocean-bottom hydrophone recorder has been developed for use in seismic refraction experiments. It is capable of operating in water depths of up to 4000 m and in very rugged topography, and uses an acoustic command system built by the U.K. Institute of Oceanographic Sciences for recovery. The instrument is mounted in an inexpensive cylindrical pressure case based on commercially available extruded aluminium alloy tubing, and uses glass spheres and syntactic foam for buoyancy. Hydrophone and clock signals are frequency modulated and recorded on tape cassettes, with a recording duration of three hours allowing up to 18 programmed shot windows. The prototype has made seven free descents on the Mid-Atlantic ridge and in the Gulf of Oman, and successfully recorded shots under operational conditions for the first time in September 1979. The total component cost of the prototype was £2740 (1979 prices).(Department of Earth Sciences, University of Cambridge Contribution No. ES135).     

La marge continentale Tunisienne: Résultats d'une étude par sismique réflexion: Sa place dans le cadre tectonique de la Méditerranée Occidentale

Résumé Une série de profils de sismique réflexion effectués au large de la Tunisie et dans le détroit sardano-tunisien aboutissent à l'élaboration d'un schéma géologique interprétatif dans lequel nous replaçons le socle paléozoïque et sa couverture autochtone (Eocène et plio-quaternaire) et allochtone (nappe numidienne). Nous discutons ensuite des manifestations néotectoniques (bassins d'effondrements plio-quaternaires-mouvement de flexure-surrections locales-venues intrusives). Enfin la nature du substratum du détroit sardano-tunisien est discutée en liaison avec les hypothèses dynamiques et statiques relatives à la formation de la Méditerranée occidentale.

---

Serial seismic reflection profiles off Tunisia and between Sardinia and Tunisia are presented. Interpretation is given which includes paleozoïc basement and its autochtonous (Eocene and plioquaternary) and allochtonous (Numidian nappe) cover. Recent tectonic activity is discussed, (Plioquaternary foundered basins, flexure, local uplifts, intrusions). Then the nature of the basement of the Sardinia-Tunisia zone is discussed with respect to the various hypotheses on the region of the Western Mediterranean.

     

Free vibration of semisubmersibles: A parametric study

Like any other engineering structure, the dynamic aspects of semisubmersible offshore platforms require serious consideration. The free vibrations of the semisubmersible structures have been investigated in the present work, in which the effect of the variation of the length, draft and hull spacings on the natural frequencies and mode shapes has been studied and the nature of the variations and their reasons have been discussed.     

Field observations of waves generated by passing ships: A note

This short contribution reports the results of a field study on the nearshore characteristics of waves generated by both conventional and high speed passenger ferries. The field observations took place in the late summer of 2005, at a beach close to the port of Mytilene (Island of Lesbos, Greece), and involved the visual observation of ship waves, using digital video recordings and image processing techniques. The results showed that passage of the fast ferry was associated with a longer, more complex and energetic nearshore event; this event not only did include higher nearshore waves (up to 0.74 m) and was organised in different wave packets, but it was also an order of magnitude longer (∼ 680 s) than the conventional ferry event. Regarding the effects on beach sediment dynamics, the fast ferry waves were estimated to be very efficient in mobilising the nearshore sediments in contrast to those of the conventional ferry. The fast ferry service appears to generate daily prolonged nearshore events, which contain waves with higher energy than those expected from the normal summer wind wave regime of the area; these events also include some high and very steep waves, which can be particularly erosive. Therefore, fast ferry wakes may have considerable impacts on the seasonal beach sediment dynamics/morphodynamics and the nearshore benthic ecology, as well as they may pose significant risks to bathers, affecting the recreational use of the beaches exposed to fast ferry traffic. Finally, the study has shown that satisfactory field observations of the nearshore characteristics of ship-generated (and wind) waves can be obtained using inshore deployments of calibrated poles, digital video cameras and appropriate image processing algorithms.     

An optimized method for automated analysis of algal pigments by HPLC

A recent development in algal pigment analysis by high-performance liquid chromatography (HPLC) is the application of automation. An optimization of a complete sampling and analysis protocol applied specifically in automation has not yet been performed. In this paper we show that automation can only be successful if the various methodological aspects of the sampling and analysis protocol are considered in coherence. We introduce an optimized protocol that involves freeze-drying of the sample, subsequent extraction in 90% acetone and the application of water-packing during analysis. The method was evaluated on both natural plankton populations and a broad spectrum of microalgal cultures: Thalassiosira weisflogii (Bacillariophyceae), Emiliania huxleyi (Prymnesiophyceae), Phaeocystis globosa and Phaeocystis antarctica (Prymnesiophyceae) and Pyramimonas sp. (Prasinophyceae). Whereas pigment extracts were unstable in methanol, with recorded chlorophyll a losses from 10% to 60% per day, pigment degradation rates in acetone were generally less than 1% over 18 h storage in the autosampler (4 °C). In addition, it was found that the extraction efficiency of acetone significantly increased upon freeze-drying prior to extraction. Increases as high as 50–60% were measured in P. antarctica. The application of water-packing of the sample during injection resulted in improved peak shape and peak separation, without diluting the pigment concentrations. Automation is especially beneficial for application in the field, when mixed algal assemblages and low biomass put a high demand on the sensitivity as well as reproducibility of the method.     

A new form of generalized Boussinesq equations for varying water depth

A new set of equations of motion for wave propagation in water with varying depth is derived in this study. The equations expressed by the velocity potentials and the wave surface elevations include first-order non-linearity of waves and have the same dispersion characteristic to the extended Boussinesq equations. Compared to the extended Boussinesq equations, the equations have only two unknown scalars and do not contain spatial derivatives with an order higher than 2. The wave equations are solved by a finite element method. Fourth-order predictor–corrector method is applied in the time integration and a damping layer is applied at the open boundary for absorbing the outgoing waves. The model is applied to several examples of wave propagation in variable water depth. The computational results are compared with experimental data and other numerical results available in literature. The comparison demonstrates that the new form of the equations is capable of calculating wave transformation from relative deep water to shallow water.     

Submerged cylinder wave energy device: theory and experiment

Linearized water wave theory is used to show that a submerged long circular cylinder suitably constrained by springs and dampers to make small harmonic oscillations, can be extremely efficient in absorbing the energy in an incident regular wave whose crests are parallel to the axis of the cylinder. Experimental results are described which confirm the theory for small amplitude waves and which suggest that the device can still be fairly efficient in waves of moderate amplitude.     

Constraining the origin and evolution of confined turbidite systems: southern Cretan margin,Eastern Mediterranean Sea (34°30–36°N)

Bathymetric, 9.5-kHz long-range sidescan sonar (OKEAN), seismic reflection and sediment-core data are used in the analysis of two tectonic troughs south of Crete, Eastern Mediterranean Sea. Here, up to 1.2 s two-way travel time (TWTT) of strata have accumulated since the Middle Miocene in association with extension in the South Aegean region. The study area comprises >100-km- long by >25-km-wide basins filled by sediments subdivided into two seismic units: (1) an upper Unit 1 deposited in sub-basins which follow the present-day configuration of the southern Cretan margin; (2) a basal Unit 2, more than 500 ms (TWTT) thick, accumulated in deeper half-graben/grabens distinct from the present-day depocentres. Both units overlap a locally stratified Unit 3 comprising the pre-Neogene core complex of Crete and Gavdos. In this work, the interpreted seismic units are correlated with the onshore stratigraphy, demonstrating that denudation processes occurring on Crete and Gavdos in response to major tectonic events have been responsible for high sedimentation rates along the proximal southern Cretan margin. Consequently, topographically confined sedimentary units have been deposited south of Crete in the last 12 Ma, including turbidites and other mass-flow deposits fed by evolving transverse and axial channel systems. Surface processes controlling facies distribution include the direct inflow of sediment from alluvial-fan systems and incising mountain rivers onto the Cretan slope, where significant sediment instability processes occur at present. In this setting, seismic profiles reveal eight different types of stratigraphic contacts on basin-margin highs, and basinal areas show evidence of halokinesis and/or fluid escape. The acquired data also show that significant changes to the margin’s configuration occurred in association with the post-Alpine tectonic and eustatic episodes affecting the Eastern Mediterranean.     

Trichodesmium erythraeum (Ehrenberg) bloom along the southwest coast of India (Arabian Sea) and its impact on trace metal concentrations in seawater

The incidence of a large scale Trichodesmium erythraeum bloom along the southwest coast of India (Arabian Sea) observed in May 2005 is reported. Around 4802 filaments of T. erythraeum ml⁻¹ seawater was observed and a colony consisted of 3.6 × 10⁵ cells. The bloom was predominant off Suratkal (12° 59′N and 74° 31′E) with a depth of about 47 m, covering an area of 7 km in length and 2 km width. The concentrations of Zinc, Cadmium, Lead, Copper, Nickel and Cobalt were determined in samples collected from the bloom and non-bloom sites using stripping voltammetry. The observed hydrographical and meteorological parameters were found to be favorable for the bloom. The concentrations of Zinc, Cadmium and Nickel were found to be higher at bloom stations, while the concentrations of Lead, Copper and Cobalt were found to be very low at bloom stations. Elevated concentrations of Cadmium and Cobalt were observed at Valappad mainly due to the decomposition of detrital material produced in the bloom. Statistically significant differences (P > 0.01) in metal concentrations between the bloom and non-bloom stations were not observed except for Copper. Metals such as Lead, Copper and Cobalt were removed from the seawater at all places where bloom was observed. Cadmium was found to be slowly released during the decaying process of the bloom.